Journal article · 2025 · Open access

Buckling-stretch-buckling dominated hybrid mechanical metamaterials fabricated from 3D-printed photopolymer: Design and investigation for enhanced multifunctional mechanical characteristics

Kashif Azher, Sajjad Hussain, Suhail Hyder Vattathurvalappil, Usman Ali, Aamer Nazir

Journal of Materials Research and Technology, 36, 8643–8662 · Published 1 May 2025 · DOI 10.1016/j.jmrt.2025.05.077

Open full textCite this paper

In brief

“Buckling-stretch-buckling dominated hybrid mechanical metamaterials fabricated from 3D-printed photopolymer: Design and investigation for enhanced multifunctional mechanical characteristics” is a 2025 journal article by Kashif Azher and 4 co-authors, published in Journal of Materials Research and Technology. OpenAlex counts 12 citations as of 22 November 2026, which puts it in the top 4% of works published in 2025 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Journal of Materials Research and Technology.

Citations
12
Most cited in
2026 (8)
Field-weighted impact
2.74
References
136
Authors
5

Abstract

With additive manufacturing, lattice structures have become advanced frameworks, and hybrid lattice structures, a type of mechanical metamaterial, can be used for lightweight and impact-resistant materials. In this paper, we present a novel study that solves the global buckling problem by dividing the lattice structure into three layers and combining them based on the mechanical properties that are stretch- and bending-dominated structures. Stretch-dominant structures are in the middle layer, while bending-dominant structures are top and bottom. Octets, Iso-trusses, and Truncated cubes are hybridized with benchmark structures like BCC, FCC, and Kelvin, and additively manufactured using stereolithography to create mechanical metamaterials. A support vector machine (SVM) model was used to predict the peak load, force-displacement response, compressive strength, and energy absorption of all lattice structures under uniaxial compression. The hybrid lattice structure (FCC and Truncated cube) increases the peak load, compressive strength, and energy absorption by 15%, 18%, and 20%, respectively, as compared to uniform lattices. Kelvin and Iso-truss hybrid lattice structures endure peak loads better than Kelvin uniform lattices. BCC and Truncated cube hybrid lattice structures absorb more energy and higher compression modulus than BCC. Designed hybrid mechanical metamaterials are multifunctional due to their global buckling resistance as compared to uniform structures. When compared with the analytical model, FCC, and Truncated cube hybrid lattice structure exceeds compressive modulus by 4 times as of the uniform lattices. SVM made accurate predictions with an average error of 3.2%, 6.3%, and 1.5% for the peak force, compression modulus, and energy absorption, respectively.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Azher, K., Hussain, S., Vattathurvalappil, S. H., Ali, U., & Nazir, A. (2025). Buckling-stretch-buckling dominated hybrid mechanical metamaterials fabricated from 3D-printed photopolymer: Design and investigation for enhanced multifunctional mechanical characteristics. Journal of Materials Research and Technology, 36, 8643–8662. https://doi.org/10.1016/j.jmrt.2025.05.077

MLA 9

Azher, Kashif, et al. “Buckling-stretch-buckling dominated hybrid mechanical metamaterials fabricated from 3D-printed photopolymer: Design and investigation for enhanced multifunctional mechanical characteristics.” Journal of Materials Research and Technology, vol. 36, 2025, pp. 8643–8662. https://doi.org/10.1016/j.jmrt.2025.05.077.

Chicago

Azher, Kashif, Sajjad Hussain, Suhail Hyder Vattathurvalappil, Usman Ali, and Aamer Nazir. 2025. “Buckling-stretch-buckling dominated hybrid mechanical metamaterials fabricated from 3D-printed photopolymer: Design and investigation for enhanced multifunctional mechanical characteristics.” Journal of Materials Research and Technology 36: 8643–8662. https://doi.org/10.1016/j.jmrt.2025.05.077.

Harvard

Azher, K. et al. (2025) ‘Buckling-stretch-buckling dominated hybrid mechanical metamaterials fabricated from 3D-printed photopolymer: Design and investigation for enhanced multifunctional mechanical characteristics’, Journal of Materials Research and Technology, 36, pp. 8643–8662. doi:10.1016/j.jmrt.2025.05.077.

IEEE

K. Azher, S. Hussain, S. H. Vattathurvalappil, U. Ali, and A. Nazir, “Buckling-stretch-buckling dominated hybrid mechanical metamaterials fabricated from 3D-printed photopolymer: Design and investigation for enhanced multifunctional mechanical characteristics,” Journal of Materials Research and Technology, vol. 36, pp. 8643–8662, 2025, doi: 10.1016/j.jmrt.2025.05.077.

BibTeX

@article{azher2025buckling,
  title     = {{Buckling-stretch-buckling dominated hybrid mechanical metamaterials fabricated from 3D-printed photopolymer: Design and investigation for enhanced multifunctional mechanical characteristics}},
  author    = {Azher, Kashif and Hussain, Sajjad and Vattathurvalappil, Suhail Hyder and Ali, Usman and Nazir, Aamer},
  journal   = {Journal of Materials Research and Technology},
  year      = {2025},
  volume    = {36},
  pages     = {8643--8662},
  doi       = {10.1016/j.jmrt.2025.05.077},
  url       = {https://doi.org/10.1016/j.jmrt.2025.05.077}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures

  • mechanical metamaterials
  • hybrid lattice structures
  • buckling
  • octet truss
  • truncated cube
  • face-centered cubic structure
  • body-centered cubic lattice
  • Kelvin lattice

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Azher, K., Hussain, S., Vattathurvalappil, S. H., Ali, U., & Nazir, A. (2025). Buckling-stretch-buckling dominated hybrid mechanical metamaterials fabricated from 3D-printed photopolymer: Design and investigation for enhanced multifunctional mechanical characteristics. Journal of Materials Research and Technology, 36, 8643–8662. https://doi.org/10.1016/j.jmrt.2025.05.077

How many times has this paper been cited?

12 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Materials Research and Technology: sign in and open the full text from this page.

Who wrote this paper?

Kashif Azher, Sajjad Hussain, Suhail Hyder Vattathurvalappil, Usman Ali, Aamer Nazir.

What is the DOI of this paper?

10.1016/j.jmrt.2025.05.077, permanently at https://doi.org/10.1016/j.jmrt.2025.05.077. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.