Journal article · 2023 · Open access

Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling

Johannes Schneider, Shanmugam Kumar

Journal of Materials Research and Technology, 26, 7182–7198 · Published 1 September 2023 · DOI 10.1016/j.jmrt.2023.09.061

Open full textCite this paper

In brief

“Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling” is a 2023 journal article by Johannes Schneider and Shanmugam Kumar, published in Journal of Materials Research and Technology. OpenAlex counts 59 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Journal of Materials Research and Technology.

Citations
59
Most cited in
2026 (25)
Field-weighted impact
5.21
References
53
Authors
2

Abstract

Additively manufactured mechanical metamaterials are gaining prominence in lightweight energy-absorption applications due to their exceptional mass-specific properties. Herein, we examine the energy absorption characteristics of micro-architected truss-, shell- and plate-lattice structures, namely, Octet, Kelvin, Gyroid, SC, BCC and FCC over a range of relative densities under quasi-static compression via both experiments and finite element analysis (FEA). Employing different 3D printing methods, namely, Digital Light Processing, Selective Laser Sintering and Material Jetting, the lattices were fabricated using PlasGray™ (photo-resin based plastic), PA12 (Nylon) and VeroWhite (photo-resin based rigid plastic) respectively. Our results indicate that the SC lattice structure outperforms in terms of stiffness and strength, while the Gyroid lattice outperforms in terms of energy absorption efficiency (η). At lower relative densities (<0.3), η reaches up to 61% for the Gyroid lattices made of PlasGray, while only at high relative densities the Octet truss lattices compete with the Gyroid lattices. For Gyroid lattices made of PA12 with a relative density of 0.23, an energy absorption efficiency of 68% was observed. Design maps are presented for all lattice structures processed and tested herein, to demonstrate their relative merits. Moreover, a two-step FEA was executed on a chosen array of lattices to thoroughly investigate the extensive design possibilities, utilising the elastic-plastic, Drucker-Prager, and concrete damage plasticity material models for PlasGray, PA12, and VeroWhite, respectively, with calibration based on experimental results. The results highlight that the tailored design of Gyroid lattices enabled by AM positions them as promising candidates for lightweight energy-absorbing applications.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Schneider, J., & Kumar, S. (2023). Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling. Journal of Materials Research and Technology, 26, 7182–7198. https://doi.org/10.1016/j.jmrt.2023.09.061

MLA 9

Schneider, Johannes, and Shanmugam Kumar. “Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling.” Journal of Materials Research and Technology, vol. 26, 2023, pp. 7182–7198. https://doi.org/10.1016/j.jmrt.2023.09.061.

Chicago

Schneider, Johannes and Shanmugam Kumar. 2023. “Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling.” Journal of Materials Research and Technology 26: 7182–7198. https://doi.org/10.1016/j.jmrt.2023.09.061.

Harvard

Schneider, J. and Kumar, S. (2023) ‘Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling’, Journal of Materials Research and Technology, 26, pp. 7182–7198. doi:10.1016/j.jmrt.2023.09.061.

IEEE

J. Schneider and S. Kumar, “Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling,” Journal of Materials Research and Technology, vol. 26, pp. 7182–7198, 2023, doi: 10.1016/j.jmrt.2023.09.061.

BibTeX

@article{schneider2023comparative,
  title     = {{Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling}},
  author    = {Schneider, Johannes and Kumar, Shanmugam},
  journal   = {Journal of Materials Research and Technology},
  year      = {2023},
  volume    = {26},
  pages     = {7182--7198},
  doi       = {10.1016/j.jmrt.2023.09.061},
  url       = {https://doi.org/10.1016/j.jmrt.2023.09.061}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202311
202499
20252424
20262525

Its field-weighted citation impact is 5.21: it has been cited 5.21 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures

  • mechanical metamaterials
  • energy absorption
  • selective laser sintering
  • material jetting
  • digital light processing
  • gyroid lattice
  • octet lattice
  • Kelvin lattice

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Schneider, J., & Kumar, S. (2023). Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling. Journal of Materials Research and Technology, 26, 7182–7198. https://doi.org/10.1016/j.jmrt.2023.09.061

How many times has this paper been cited?

59 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Materials Research and Technology: sign in and open the full text from this page.

Who wrote this paper?

Johannes Schneider, Shanmugam Kumar.

What is the DOI of this paper?

10.1016/j.jmrt.2023.09.061, permanently at https://doi.org/10.1016/j.jmrt.2023.09.061. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.