Journal article · 2026 · Open access
An Underactuated Variable Stiffness Continuum Robot With Multi-Layer Jamming Spherical Joints
IEEE Transactions on Automation Science and Engineering, 23, 6604–6616 · Published 1 January 2026 · DOI 10.1109/tase.2026.3673298
In brief
“An Underactuated Variable Stiffness Continuum Robot With Multi-Layer Jamming Spherical Joints” is a 2026 journal article by Xinpei Ai and 6 co-authors, published in IEEE Transactions on Automation Science and Engineering. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Infoscience (Ecole Polytechnique Fédérale de Lausanne).
- Citations
- 0
- References
- 36
- Authors
- 7
Abstract
Continuum robots(CRs) are featured with high compliance and adaptability. However, existing CRs commonly face issues of insufficient stiffness and actuation redundancy. This paper proposes a novel design of multi-layer jamming spherical joint (MLJSJ) and develops a pneumatically actuated variable-stiffness continuum robot. A segmented spherical expansion actuator airbag, resembling Tanghulu, is fabricated via the lost-wax method to meet the positive-pressure actuation requirements. The proposed robot consists of four serially connected continuum segments, each containing four spherical joints for smooth bending motion. By leveraging multi-layer frictional interactions within jamming structures, the robot achieves rapid and wide-range stiffness modulation under relatively low air pressure. Each continuum segment can be locked via a dedicated actuation airbag, with its pressure regulated by a proportional valve to enable rapid switching between rigid and flexible states. By switching the lock-unlock states of segments, the variable-stiffness mechanism decouples multi-segment motions into single-segment bending, enabling sequential actuation of all segments by using only four embedded alloy rods. A dedicated experimental setup was developed to characterize performance, demonstrating that a single segment reaches a maximum stiffness of 1403.03 N/m, with a stiffness modulation ratio of 35.85 and switching times ranging from 0.07 s to 0.43 s. Furthermore, by controlling the stiffness states and bending motions of different segments, the single segment of robot demonstrates a maximum payload capacity of 2 kg and versatile motion flexibility verified through obstacle avoidance and grasping tasks.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Ai, X., Li, C., Zhang, Y., Chen, Y., Chen, C., Wang, H., & Chen, R. (2026). An Underactuated Variable Stiffness Continuum Robot With Multi-Layer Jamming Spherical Joints. IEEE Transactions on Automation Science and Engineering, 23, 6604–6616. https://doi.org/10.1109/tase.2026.3673298
MLA 9
Ai, Xinpei, et al. “An Underactuated Variable Stiffness Continuum Robot With Multi-Layer Jamming Spherical Joints.” IEEE Transactions on Automation Science and Engineering, vol. 23, 2026, pp. 6604–6616. https://doi.org/10.1109/tase.2026.3673298.
Chicago
Ai, Xinpei, Can Li, Yadong Zhang, Yifei Chen, Chen Chen, Huijiang Wang, and Rui Chen. 2026. “An Underactuated Variable Stiffness Continuum Robot With Multi-Layer Jamming Spherical Joints.” IEEE Transactions on Automation Science and Engineering 23: 6604–6616. https://doi.org/10.1109/tase.2026.3673298.
Harvard
Ai, X. et al. (2026) ‘An Underactuated Variable Stiffness Continuum Robot With Multi-Layer Jamming Spherical Joints’, IEEE Transactions on Automation Science and Engineering, 23, pp. 6604–6616. doi:10.1109/tase.2026.3673298.
IEEE
X. Ai et al., “An Underactuated Variable Stiffness Continuum Robot With Multi-Layer Jamming Spherical Joints,” IEEE Transactions on Automation Science and Engineering, vol. 23, pp. 6604–6616, 2026, doi: 10.1109/tase.2026.3673298.
BibTeX
@article{ai2026underactuated,
title = {{An Underactuated Variable Stiffness Continuum Robot With Multi-Layer Jamming Spherical Joints}},
author = {Ai, Xinpei and Li, Can and Zhang, Yadong and Chen, Yifei and Chen, Chen and Wang, Huijiang and Chen, Rui},
journal = {IEEE Transactions on Automation Science and Engineering},
year = {2026},
volume = {23},
pages = {6604--6616},
doi = {10.1109/tase.2026.3673298},
url = {https://doi.org/10.1109/tase.2026.3673298}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- continuum robots
- variable stiffness
- underactuated robots
- stiffness modulation
- frictional interaction
- obstacle avoidance
- grasping
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Ai, X., Li, C., Zhang, Y., Chen, Y., Chen, C., Wang, H., & Chen, R. (2026). An Underactuated Variable Stiffness Continuum Robot With Multi-Layer Jamming Spherical Joints. IEEE Transactions on Automation Science and Engineering, 23, 6604–6616. https://doi.org/10.1109/tase.2026.3673298
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Infoscience (Ecole Polytechnique Fédérale de Lausanne): sign in and open the full text from this page.
Who wrote this paper?
Xinpei Ai, Can Li, Yadong Zhang, Yifei Chen, Chen Chen, Huijiang Wang, Rui Chen.
What is the DOI of this paper?
10.1109/tase.2026.3673298, permanently at https://doi.org/10.1109/tase.2026.3673298. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.