Journal article · 2013 · Open access

A buffer-layer/a-SiOx:H(p) window-layer optimization for thin film amorphous silicon based solar cells

Jinjoo Park, Vinh Ai Dao, Chonghoon Shin, Hyeongsik Park, Min‐Bum Kim, Junhee Jung, Doyoung Kim, Junsin Yi

Thin Solid Films, 546, 331–336 · Published 29 June 2013 · DOI 10.1016/j.tsf.2013.06.064

Free PDFView at the publisherCite this paper

In brief

“A buffer-layer/a-SiOx:H(p) window-layer optimization for thin film amorphous silicon based solar cells” is a 2013 journal article by Jinjoo Park and 7 co-authors, published in Thin Solid Films. OpenAlex counts 26 citations as of 16 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Thin Solid Films.

Citations
26
Most cited in
2017 (6)
Field-weighted impact
2.23
References
25
Authors
8

Abstract

Amorphous silicon based (a-Si:H-based) solar cells with a buffer-layer/boron doped hydrogenated amorphous silicon oxide (a-SiOx:H(p)) window-layer were fabricated and investigated. In the first part, in order to reduce the Schottky barrier height at the fluorine doped tin oxide (FTO)/a-SiOx:H(p) window-layer heterointerface, we have used buffer-layer/a-SiOx:H(p) for the window-layer, in which boron doped hydrogenated amorphous silicon (a-Si:H(p)) or boron doped microcrystalline silicon (μc-Si:H(p)) is introduced as a buffer layer between the a-SiOx:H(p) and FTO of the a-Si:H-based solar cells. The a-Si:H-based solar cell using a μc-Si:H(p) buffer-layer shows the highest efficiency compared to the optimized bufferless, and a-Si:H(p) buffer-layer in the a-Si:H-based solar cells. This highest performance was attributed not only to the lower absorption of the μc-Si:H(p) buffer-layer but also to the lower Schottky barrier height at the FTO/window-layer interface. Then, we present the dependence of the built-in potential (Vbi) and blue response of the devices on the inversion of activation energy (ξ) of the a-SiOx:H(p), in the μc-Si:H(p)/a-SiOx:H(p) window-layer. The enhancement of both Vbi and blue response is observed, by increasing the value of ξ. The improvement of Vbi and blue response can be ascribed to the enlargement of the optical gap of a-SiOx:H(p) films in the μc-Si:H(p)/a-SiOx:H(p) window-layer. Finally, the conversion efficiency was increased by 22.0%, by employing μc-Si:H(p) as a buffer-layer and raising the ξ of the a-SiOx:H(p), compared to the optimized bufferless case, with a 10 nm-thick a-SiOx:H(p) window-layer.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Park, J., Dao, V. A., Shin, C., Park, H., Kim, M., Jung, J., Kim, D., & Yi, J. (2013). A buffer-layer/a-SiOx:H(p) window-layer optimization for thin film amorphous silicon based solar cells. Thin Solid Films, 546, 331–336. https://doi.org/10.1016/j.tsf.2013.06.064

MLA 9

Park, Jinjoo, et al. “A buffer-layer/a-SiOx:H(p) window-layer optimization for thin film amorphous silicon based solar cells.” Thin Solid Films, vol. 546, 2013, pp. 331–336. https://doi.org/10.1016/j.tsf.2013.06.064.

Chicago

Park, Jinjoo, Vinh Ai Dao, Chonghoon Shin, Hyeongsik Park, Min‐Bum Kim, Junhee Jung, Doyoung Kim, and Junsin Yi. 2013. “A buffer-layer/a-SiOx:H(p) window-layer optimization for thin film amorphous silicon based solar cells.” Thin Solid Films 546: 331–336. https://doi.org/10.1016/j.tsf.2013.06.064.

Harvard

Park, J. et al. (2013) ‘A buffer-layer/a-SiOx:H(p) window-layer optimization for thin film amorphous silicon based solar cells’, Thin Solid Films, 546, pp. 331–336. doi:10.1016/j.tsf.2013.06.064.

IEEE

J. Park et al., “A buffer-layer/a-SiOx:H(p) window-layer optimization for thin film amorphous silicon based solar cells,” Thin Solid Films, vol. 546, pp. 331–336, 2013, doi: 10.1016/j.tsf.2013.06.064.

BibTeX

@article{park2013buffer,
  title     = {{A buffer-layer/a-SiOx:H(p) window-layer optimization for thin film amorphous silicon based solar cells}},
  author    = {Park, Jinjoo and Dao, Vinh Ai and Shin, Chonghoon and Park, Hyeongsik and Kim, Min‐Bum and Jung, Junhee and Kim, Doyoung and Yi, Junsin},
  journal   = {Thin Solid Films},
  year      = {2013},
  volume    = {546},
  pages     = {331--336},
  doi       = {10.1016/j.tsf.2013.06.064},
  url       = {https://doi.org/10.1016/j.tsf.2013.06.064}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201444
201544
201644
201766
201811
202133
202233
202511

Its field-weighted citation impact is 2.23: it has been cited 2.23 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • hydrogenated amorphous silicon solar cells
  • window layer
  • buffer layer
  • Schottky barrier height
  • fluorine-doped tin oxide
  • built-in potential
  • blue response
  • activation energy

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Park, J., Dao, V. A., Shin, C., Park, H., Kim, M., Jung, J., Kim, D., & Yi, J. (2013). A buffer-layer/a-SiOx:H(p) window-layer optimization for thin film amorphous silicon based solar cells. Thin Solid Films, 546, 331–336. https://doi.org/10.1016/j.tsf.2013.06.064

How many times has this paper been cited?

26 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Thin Solid Films.

Who wrote this paper?

Jinjoo Park, Vinh Ai Dao, Chonghoon Shin, Hyeongsik Park, Min‐Bum Kim, Junhee Jung, Doyoung Kim, Junsin Yi.

What is the DOI of this paper?

10.1016/j.tsf.2013.06.064. The permanent link is https://doi.org/10.1016/j.tsf.2013.06.064.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.