Journal article · 2017 · Open access
Wpływ parametrów w metodzie TIG na odkształcenia kątowe stali X5CrNi18-10
Welding Technology Review, 89(5) · Published 10 May 2017 · DOI 10.26628/ps.v89i5.764
In brief
“Wpływ parametrów w metodzie TIG na odkształcenia kątowe stali X5CrNi18-10” is a 2017 journal article by Robert Bęczkowski, published in Welding Technology Review. OpenAlex counts 2 citations as of 22 November 2026. It is open access: the full text is free to read at Welding Technology Review.
- Citations
- 2
- Most cited in
- 2018 (1)
- Field-weighted impact
- 0.37
- References
- 10
- Authors
- 1
Abstract
The paper presents the problem of the influence of the current setting and the distance between the electrode and the object welded by TIG method on the corresponding changes the angular deformation of the element. Design of the experiment method was used. Experimental test were performed for material grade X5CrNi18-10. The analysis of the changes in specimen deformation based on the current setting in the range from 100 to 200 A and the change of the distance between the electrode and the welded object in the range from 2 to 4 mm was made. Automatic travelling of the gun by using the head for welding mechanization was used to perform technological tests. Prepared specimen were subjected to precise coordinate measurement to determine the angular deformation. in polishWpływ parametrów w metodzie TIG na odkształcenia kątowe stali X5CrNi18-10W pracy przedstawiono zagadnienie wpływu nastaw natężenia prądu spawania oraz odległości elektrody od materiału rodzimego na wielkość kątowych odkształceń próbek przetapianych metodą TIG. Do tego celu wykorzystywano metody planowania eksperymentu. Prace doświadczalne przeprowadzono dla materiału gatunku X5CrNi18-10. Dokonano analizy zmian odkształcenia próbki w zależności od nastaw natężenia prądu spawania w zakresie od 100 do 200 A oraz zmiany odległości elektrody od przedmiotu spawanego w zakresie od 2 do 4 mm. Do prób technologicznych wykorzystano automatyczny przesuw uchwytu poprzez zastosowanie głowicy do mechanizacji spawania. Przygotowane próbki zostały poddane precyzyjnym pomiarom współrzędnościowym, celem określenia odkształceń kątowych.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Bęczkowski, R. (2017). Wpływ parametrów w metodzie TIG na odkształcenia kątowe stali X5CrNi18-10. Welding Technology Review, 89(5). https://doi.org/10.26628/ps.v89i5.764
MLA 9
Bęczkowski, Robert. “Wpływ parametrów w metodzie TIG na odkształcenia kątowe stali X5CrNi18-10.” Welding Technology Review, vol. 89, no. 5, 2017. https://doi.org/10.26628/ps.v89i5.764.
Chicago
Bęczkowski, Robert. 2017. “Wpływ parametrów w metodzie TIG na odkształcenia kątowe stali X5CrNi18-10.” Welding Technology Review 89 (5). https://doi.org/10.26628/ps.v89i5.764.
Harvard
Bęczkowski, R. (2017) ‘Wpływ parametrów w metodzie TIG na odkształcenia kątowe stali X5CrNi18-10’, Welding Technology Review, 89(5). doi:10.26628/ps.v89i5.764.
IEEE
R. Bęczkowski, “Wpływ parametrów w metodzie TIG na odkształcenia kątowe stali X5CrNi18-10,” Welding Technology Review, vol. 89, no. 5, 2017, doi: 10.26628/ps.v89i5.764.
BibTeX
@article{beczkowski2017parametr,
title = {{Wpływ parametrów w metodzie TIG na odkształcenia kątowe stali X5CrNi18-10}},
author = {Bęczkowski, Robert},
journal = {Welding Technology Review},
year = {2017},
volume = {89},
number = {5},
doi = {10.26628/ps.v89i5.764},
url = {https://doi.org/10.26628/ps.v89i5.764}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- TIG welding
- angular distortion
- X5CrNi18-10 stainless steel
- welding current
- welding parameters
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Bęczkowski, R. (2017). Wpływ parametrów w metodzie TIG na odkształcenia kątowe stali X5CrNi18-10. Welding Technology Review, 89(5). https://doi.org/10.26628/ps.v89i5.764
How many times has this paper been cited?
2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Welding Technology Review: sign in and open the PDF from this page.
Who wrote this paper?
Robert Bęczkowski.
What is the DOI of this paper?
10.26628/ps.v89i5.764, permanently at https://doi.org/10.26628/ps.v89i5.764. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.