Dissertation · 2015 · Open access

Web crippling and local buckling response of stainless steel sections

Marina Bock Montero

UPCommons institutional repository (Universitat Politècnica de Catalunya) · Published 6 February 2015 · DOI 10.5821/dissertation-2117-95606

Open PDFView at the publisherCite this paper

In brief

“Web crippling and local buckling response of stainless steel sections” is a 2015 dissertation by Marina Bock Montero, published in UPCommons institutional repository (Universitat Politècnica de Catalunya). OpenAlex counts 1 citations as of 22 November 2026. It is open access: the full text is free to read at UPCommons institutional repository (Universitat Politècnica de Catalunya).

Citations
1
Most cited in
2019 (1)
References
127
Authors
1

Abstract

This thesis examines the response of stainless steel members when subjected to transverse and normal forces triggering the instability phenomena called web crippling and local buckling, respectively. Currently, the part of Eurocode dealing with stainless steel, EN 1993-1-4 (2006) misses design provisions for web crippling and the applicability of some of its aspects is yet to be fully verified especially for application to ferritic stainless steel. The first part of the thesis laid in the development of design equations for the treatment of web crippling in stainless steel sections which are currently designed following specifications given in EN 1993-1-3 (2006) for cold-formed carbon steel. Two design approaches were derived covering austenitic and ferritic stainless steels: an empiric equation, in line with the current provisions for web crippling design given in EN 1993-1-3 (2006); and an alternative semi-empiric design method based on strength curves which enables a better understanding of the phenomenon and showed to significantly improve web crippling predictions. For the second part of the thesis, the applicability of the local buckling design provisions given in EN 1993-1-4 (2006) to ferritic stainless steel was examined giving focus to the slenderness limits and the effective width equations. The results showed that EN 1993-1-4 (2006) can safely be applied to ferritic stainless steel, though the code is rather conservative in comparison with other methods. Finally, a modification of the effective width equation incorporating element interaction effects was proposed which allows an improvement of cross-section capacity predictions and enables to amend the effective width method to the same level of alternative design approaches but promoting the use of the concepts currently considered in Eurocode. Esta tesis estudia la respuesta estructural de elementos de acero inoxidable sometidos a fuerzas transversales i normales que desencadenan los fenómenos de inestabilidad llamados web crippling y local buckling, respectivamente. Actualmente, la parte de Eurocódigo que contempla los aceros inoxidables, el EN 1993-1-4 (2006) carece de ecuaciones de diseño para web crippling y la aplicabilidad de algunas de sus especificaciones necesita ser validada especialmente para los aceros inoxidables ferríticos. La primera parte de esta tesis se focaliza en el desarrollo de ecuaciones de diseño para el tratamiento del web crippling en secciones de acero inoxidable que actualmente se diseñan siguiendo las especificaciones dadas en EN 1993-1-3 (2006) para acero al carbono conformado en frío. Dos métodos de diseño para los aceros inoxidables austeníticos y ferríticos: una ecuación empírica en línea con la actual dada en EN 1993-1-3 (2006); y un método de diseño semi-empírico basado en curvas de resistencia…

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Montero, M. B. (2015). Web crippling and local buckling response of stainless steel sections. UPCommons institutional repository (Universitat Politècnica de Catalunya). https://doi.org/10.5821/dissertation-2117-95606

MLA 9

Montero, Marina Bock. “Web crippling and local buckling response of stainless steel sections.” UPCommons institutional repository (Universitat Politècnica de Catalunya), 2015. https://doi.org/10.5821/dissertation-2117-95606.

Chicago

Montero, Marina Bock. 2015. “Web crippling and local buckling response of stainless steel sections.” UPCommons institutional repository (Universitat Politècnica de Catalunya). https://doi.org/10.5821/dissertation-2117-95606.

Harvard

Montero, M. B. (2015) ‘Web crippling and local buckling response of stainless steel sections’, UPCommons institutional repository (Universitat Politècnica de Catalunya). doi:10.5821/dissertation-2117-95606.

IEEE

M. B. Montero, “Web crippling and local buckling response of stainless steel sections,” UPCommons institutional repository (Universitat Politècnica de Catalunya), 2015, doi: 10.5821/dissertation-2117-95606.

BibTeX

@phdthesis{montero2015crippling,
  title     = {{Web crippling and local buckling response of stainless steel sections}},
  author    = {Montero, Marina Bock},
  year      = {2015},
  doi       = {10.5821/dissertation-2117-95606},
  url       = {https://doi.org/10.5821/dissertation-2117-95606}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Civil and Structural Engineering › Structural Load-Bearing Analysis

  • web crippling
  • local buckling
  • EN 1993-1-4
  • EN 1993-1-3
  • ferritic stainless steel
  • austenitic stainless steel
  • design equations
  • strength curves

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Montero, M. B. (2015). Web crippling and local buckling response of stainless steel sections. UPCommons institutional repository (Universitat Politècnica de Catalunya). https://doi.org/10.5821/dissertation-2117-95606

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at UPCommons institutional repository (Universitat Politècnica de Catalunya): sign in and open the PDF from this page.

Who wrote this paper?

Marina Bock Montero.

What is the DOI of this paper?

10.5821/dissertation-2117-95606, permanently at https://doi.org/10.5821/dissertation-2117-95606. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.