Journal article · 2012 · Open access

Wear properties of NiAl based materials

Guo Jianting, Zhensheng Wang, Liyuan Sheng, Lanzhang Zhou, Chao Yuan, Zhigang Chen, Li Song

Progress in Natural Science Materials International, 22(5), 414–425 · Published 1 October 2012 · DOI 10.1016/j.pnsc.2012.10.008

Open PDFView at the publisherCite this paper

In brief

“Wear properties of NiAl based materials” is a 2012 journal article by Guo Jianting and 6 co-authors, published in Progress in Natural Science Materials International. OpenAlex counts 34 citations as of 17 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Progress in Natural Science Materials International.

Citations
34
Most cited in
2019 (6)
Field-weighted impact
0.53
References
35
Authors
7

Abstract

The NiAl based materials including NiAl–TiC–Al2O3 composite, NiAl–Cr(Mo)–Hf–Ho eutectic alloy and NiAl–Cr(Mo)–CrxSy in situ composite were fabricated and their wear properties were tested at different temperatures. The results revealed that the NiAl–TiC–Al2O3 composite, NiAl–Cr(Mo)–Hf–Ho eutectic alloy and NiAl–Cr(Mo)–CrxSy in situ composite exhibited the excellent wear properties between 700 °C and 900 °C. The microstructure observations exhibited that the self-lubricant films formed on the worn surfaces during the dry sliding test at high temperature, which decreased the wear rate and friction coefficient significantly. TEM observation on the self-lubricant film revealed that it was mainly comprised by ceramic amorphous and nanocrystalline. Compared with the NiAl–TiC–Al2O3 composite, the NiAl–Cr(Mo)–CrxSy in situ composite has lower friction coefficient at low temperature. Such phenomena may be ascribed to the addition of sulfide which contributes much to the formation of self-lubricant, and moreover the TiC addition increase the strength of NiAl based material and its wear resistance.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Jianting, G., Wang, Z., Sheng, L., Zhou, L., Yuan, C., Chen, Z., & Song, L. (2012). Wear properties of NiAl based materials. Progress in Natural Science Materials International, 22(5), 414–425. https://doi.org/10.1016/j.pnsc.2012.10.008

MLA 9

Jianting, Guo, et al. “Wear properties of NiAl based materials.” Progress in Natural Science Materials International, vol. 22, no. 5, 2012, pp. 414–425. https://doi.org/10.1016/j.pnsc.2012.10.008.

Chicago

Jianting, Guo, Zhensheng Wang, Liyuan Sheng, Lanzhang Zhou, Chao Yuan, Zhigang Chen, and Li Song. 2012. “Wear properties of NiAl based materials.” Progress in Natural Science Materials International 22 (5): 414–425. https://doi.org/10.1016/j.pnsc.2012.10.008.

Harvard

Jianting, G. et al. (2012) ‘Wear properties of NiAl based materials’, Progress in Natural Science Materials International, 22(5), pp. 414–425. doi:10.1016/j.pnsc.2012.10.008.

IEEE

G. Jianting et al., “Wear properties of NiAl based materials,” Progress in Natural Science Materials International, vol. 22, no. 5, pp. 414–425, 2012, doi: 10.1016/j.pnsc.2012.10.008.

BibTeX

@article{jianting2012wear,
  title     = {{Wear properties of NiAl based materials}},
  author    = {Jianting, Guo and Wang, Zhensheng and Sheng, Liyuan and Zhou, Lanzhang and Yuan, Chao and Chen, Zhigang and Song, Li},
  journal   = {Progress in Natural Science Materials International},
  year      = {2012},
  volume    = {22},
  number    = {5},
  pages     = {414--425},
  doi       = {10.1016/j.pnsc.2012.10.008},
  url       = {https://doi.org/10.1016/j.pnsc.2012.10.008}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201655
201711
201844
201966
202055
202144
202222
202333
202411
202522

Its field-weighted citation impact is 0.53: it has been cited 0.53 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties

  • wear resistance
  • in situ composites
  • high-temperature wear
  • dry sliding wear
  • friction coefficient

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Jianting, G., Wang, Z., Sheng, L., Zhou, L., Yuan, C., Chen, Z., & Song, L. (2012). Wear properties of NiAl based materials. Progress in Natural Science Materials International, 22(5), 414–425. https://doi.org/10.1016/j.pnsc.2012.10.008

How many times has this paper been cited?

34 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Progress in Natural Science Materials International: sign in and open the PDF from this page.

Who wrote this paper?

Guo Jianting, Zhensheng Wang, Liyuan Sheng, Lanzhang Zhou, Chao Yuan, Zhigang Chen, Li Song.

What is the DOI of this paper?

10.1016/j.pnsc.2012.10.008, permanently at https://doi.org/10.1016/j.pnsc.2012.10.008. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.