Journal article · 2012 · Open access
Wear Mechanism of High-Speed Turning Ti-6Al-4V with TiAlN and AlTiN Coated Tools in Dry and MQL Conditions
Advanced materials research, 497, 30–34 · Published 1 April 2012 · DOI 10.4028/www.scientific.net/amr.497.30
In brief
“Wear Mechanism of High-Speed Turning Ti-6Al-4V with TiAlN and AlTiN Coated Tools in Dry and MQL Conditions” is a 2012 journal article by Jinyang Xu and 3 co-authors, published in Advanced materials research. OpenAlex counts 7 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.
- Citations
- 7
- Most cited in
- 2016 (2)
- Field-weighted impact
- 0.53
- References
- 7
- Authors
- 4
Abstract
The TiAlN and AlTiN coated carbide cutting tools were adopted for high-speed turning of α+β phase titanium alloy Ti-6Al-4V. Both the wear pattern and wear mechanism were investigated in this research. Results show that: MQL condition can greatly prolong the tool life of AlTiN coated carbide tool but has minor influence on improving the tool life of TiAlN carbide tool. AlTiN coated carbide tool was found to be qualified to obtain better cutting performance and longer tool life and is more suitable for processing titanium alloy TC4 compared with TiAlN coated tool under the same cutting parameters. In dry cutting condition, both adhesive and oxidation wear were observed to be the main wear types in these two coated carbide tools. However, in MQL condition, TiAlN coated tool may only suffer adhesive wear while the AlTiN coated carbide tool suffer adhesive, diffusion and oxidation wear.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Xu, J., Liu, Z., An, Q. L., & Chen, M. (2012). Wear Mechanism of High-Speed Turning Ti-6Al-4V with TiAlN and AlTiN Coated Tools in Dry and MQL Conditions. Advanced materials research, 497, 30–34. https://doi.org/10.4028/www.scientific.net/amr.497.30
MLA 9
Xu, Jinyang, et al. “Wear Mechanism of High-Speed Turning Ti-6Al-4V with TiAlN and AlTiN Coated Tools in Dry and MQL Conditions.” Advanced materials research, vol. 497, 2012, pp. 30–34. https://doi.org/10.4028/www.scientific.net/amr.497.30.
Chicago
Xu, Jinyang, Zhiqiang Liu, Qing Long An, and Ming Chen. 2012. “Wear Mechanism of High-Speed Turning Ti-6Al-4V with TiAlN and AlTiN Coated Tools in Dry and MQL Conditions.” Advanced materials research 497: 30–34. https://doi.org/10.4028/www.scientific.net/amr.497.30.
Harvard
Xu, J. et al. (2012) ‘Wear Mechanism of High-Speed Turning Ti-6Al-4V with TiAlN and AlTiN Coated Tools in Dry and MQL Conditions’, Advanced materials research, 497, pp. 30–34. doi:10.4028/www.scientific.net/amr.497.30.
IEEE
J. Xu, Z. Liu, Q. L. An, and M. Chen, “Wear Mechanism of High-Speed Turning Ti-6Al-4V with TiAlN and AlTiN Coated Tools in Dry and MQL Conditions,” Advanced materials research, vol. 497, pp. 30–34, 2012, doi: 10.4028/www.scientific.net/amr.497.30.
BibTeX
@article{xu2012wear,
title = {{Wear Mechanism of High-Speed Turning Ti-6Al-4V with TiAlN and AlTiN Coated Tools in Dry and MQL Conditions}},
author = {Xu, Jinyang and Liu, Zhiqiang and An, Qing Long and Chen, Ming},
journal = {Advanced materials research},
year = {2012},
volume = {497},
pages = {30--34},
doi = {10.4028/www.scientific.net/amr.497.30},
url = {https://doi.org/10.4028/www.scientific.net/amr.497.30}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2015 | 1 | |
| 2016 | 2 | |
| 2018 | 1 | |
| 2020 | 1 | |
| 2022 | 1 | |
| 2023 | 1 |
Its field-weighted citation impact is 0.53: it has been cited 0.53 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Ti-6Al-4V
- high-speed turning
- TiAlN coating
- coated carbide tools
- tool wear mechanisms
- dry machining
- minimum quantity lubrication
- tool life
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Xu, J., Liu, Z., An, Q. L., & Chen, M. (2012). Wear Mechanism of High-Speed Turning Ti-6Al-4V with TiAlN and AlTiN Coated Tools in Dry and MQL Conditions. Advanced materials research, 497, 30–34. https://doi.org/10.4028/www.scientific.net/amr.497.30
How many times has this paper been cited?
7 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advanced materials research: sign in and open the full text from this page.
Who wrote this paper?
Jinyang Xu, Zhiqiang Liu, Qing Long An, Ming Chen.
What is the DOI of this paper?
10.4028/www.scientific.net/amr.497.30, permanently at https://doi.org/10.4028/www.scientific.net/amr.497.30. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.