Journal article · 2012 · Open access
Wear Behavior of Carbide Inserts in Face Milling TA19 Alloy
Advanced materials research, 426, 339–343 · Published 1 January 2012 · DOI 10.4028/www.scientific.net/amr.426.339
In brief
“Wear Behavior of Carbide Inserts in Face Milling TA19 Alloy” is a 2012 journal article by Qiu Lin Niu and 4 co-authors, published in Advanced materials research. OpenAlex counts 3 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.
- Citations
- 3
- Most cited in
- 2012 (1)
- Field-weighted impact
- 0.53
- References
- 8
- Authors
- 5
Abstract
As a typical high strength material, titanium alloy Ti-6Al-2Sn-4Zr- 2Mo-0.1Si (TA19) is used to manufacturing the compressor power-brake of aircraft engine and the aircraft skin. All the machining experiments were carried out on a CNC-milling center under the stable conditions of cutting speed, feed rate, and depth of cut. The performance and wear mechanisms of coated- and uncoated carbide tools have been investigated in this paper to evaluate the machinability of TA19 in face milling. The three tools used were PVD-TiN+TiAlN, CVD-TiN+Al2O3+TiCN and uncoated carbide inserts. The results indicated that PVD coating had the best performance than other tool materials in milling titanium alloy TA19, and the cutting force and the wear value were the smallest than that for CVD-coated and uncoated tools. The failure types of PVD-, CVD- and uncoated inserts were the crater wear and micro tipping; the crater wear and tipping; tipping. Abrasive wear and adherent wear were the predominant mechanism of PVD-TiN+TiAlN carbide insert in face milling TA19 alloy. For CVD- and uncoated carbide, adherent wear was predominant.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Niu, Q. L., Cai, X., Liu, Z., Chen, M., & An, Q. L. (2012). Wear Behavior of Carbide Inserts in Face Milling TA19 Alloy. Advanced materials research, 426, 339–343. https://doi.org/10.4028/www.scientific.net/amr.426.339
MLA 9
Niu, Qiu Lin, et al. “Wear Behavior of Carbide Inserts in Face Milling TA19 Alloy.” Advanced materials research, vol. 426, 2012, pp. 339–343. https://doi.org/10.4028/www.scientific.net/amr.426.339.
Chicago
Niu, Qiu Lin, Xin Cai, Zhiqiang Liu, Ming Chen, and Qing Long An. 2012. “Wear Behavior of Carbide Inserts in Face Milling TA19 Alloy.” Advanced materials research 426: 339–343. https://doi.org/10.4028/www.scientific.net/amr.426.339.
Harvard
Niu, Q. L. et al. (2012) ‘Wear Behavior of Carbide Inserts in Face Milling TA19 Alloy’, Advanced materials research, 426, pp. 339–343. doi:10.4028/www.scientific.net/amr.426.339.
IEEE
Q. L. Niu, X. Cai, Z. Liu, M. Chen, and Q. L. An, “Wear Behavior of Carbide Inserts in Face Milling TA19 Alloy,” Advanced materials research, vol. 426, pp. 339–343, 2012, doi: 10.4028/www.scientific.net/amr.426.339.
BibTeX
@article{niu2012wear,
title = {{Wear Behavior of Carbide Inserts in Face Milling TA19 Alloy}},
author = {Niu, Qiu Lin and Cai, Xin and Liu, Zhiqiang and Chen, Ming and An, Qing Long},
journal = {Advanced materials research},
year = {2012},
volume = {426},
pages = {339--343},
doi = {10.4028/www.scientific.net/amr.426.339},
url = {https://doi.org/10.4028/www.scientific.net/amr.426.339}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2012 | 1 | |
| 2016 | 1 | |
| 2020 | 1 |
Its field-weighted citation impact is 0.53: it has been cited 0.53 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- face milling
- carbide inserts
- tool wear
- PVD coatings
- CVD coatings
- TiCN coating
- alumina coatings
- crater wear
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Niu, Q. L., Cai, X., Liu, Z., Chen, M., & An, Q. L. (2012). Wear Behavior of Carbide Inserts in Face Milling TA19 Alloy. Advanced materials research, 426, 339–343. https://doi.org/10.4028/www.scientific.net/amr.426.339
How many times has this paper been cited?
3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advanced materials research: sign in and open the full text from this page.
Who wrote this paper?
Qiu Lin Niu, Xin Cai, Zhiqiang Liu, Ming Chen, Qing Long An.
What is the DOI of this paper?
10.4028/www.scientific.net/amr.426.339, permanently at https://doi.org/10.4028/www.scientific.net/amr.426.339. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.