Paper · 2010 · Open access

W-Doped DLC Films by IBD and MS

Zhiqiang Fu, Cheng Biao Wang, Wei Wang, Zhi Jian Peng, Xiang Yu, Song Lin, Ming Jiang Dai

Key engineering materials, 434-435, 477–480 · Published 1 March 2010 · DOI 10.4028/www.scientific.net/kem.434-435.477

Open full textCite this paper

In brief

“W-Doped DLC Films by IBD and MS” is a 2010 paper by Zhiqiang Fu and 6 co-authors, published in Key engineering materials. OpenAlex counts 5 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Key engineering materials.

Citations
5
Most cited in
2013 (2)
Field-weighted impact
0.81
References
4
Authors
7

Abstract

W-doped DLC films were synthesized from ethyne and tungsten by ion beam deposition and magnetron sputtering, and the influence of W target current on the structures and the properties of W-doped DLC films were studied. There exist some defects smaller than 3micron in W-doped DLC films and the influence of W target current on the defects is unobvious. The W content in the films is tardily increased with W target current below 3.5A, and then acutely rises with W target current. When target current is below 3.5A, the ratio of sp3-C to sp2-C is first decreased and then increased with the rise of target current, and the ratio of WC-C to sp2-C is close to 0; but when the target is above 3.5A, the ratio of sp3-C to sp2-C is decreased and the ratio of WC-C to sp2-C is augmented with further increasing target current. The hardness and the modulus is first decreased with target current and the minimum value is reached for the W-doped DLC films deposited with a target current of 2.6A. The W-doped DLC films deposited with a target current of 2.6A exhibit the best film-substrate adhesion. The W-doped DLC films deposited with a low target current exhibit a friction coefficient while the wear resistance of the W-doped DLC films deposited with a medium target current of 2.6A is best.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Fu, Z., Wang, C. B., Wang, W., Peng, Z. J., Yu, X., Lin, S., & Dai, M. J. (2010). W-Doped DLC Films by IBD and MS. Key engineering materials, 434-435, 477–480. https://doi.org/10.4028/www.scientific.net/kem.434-435.477

MLA 9

Fu, Zhiqiang, et al. “W-Doped DLC Films by IBD and MS.” Key engineering materials, vol. 434-435, 2010, pp. 477–480. https://doi.org/10.4028/www.scientific.net/kem.434-435.477.

Chicago

Fu, Zhiqiang, Cheng Biao Wang, Wei Wang, Zhi Jian Peng, Xiang Yu, Song Lin, and Ming Jiang Dai. 2010. “W-Doped DLC Films by IBD and MS.” Key engineering materials 434-435: 477–480. https://doi.org/10.4028/www.scientific.net/kem.434-435.477.

Harvard

Fu, Z. et al. (2010) ‘W-Doped DLC Films by IBD and MS’, Key engineering materials, 434-435, pp. 477–480. doi:10.4028/www.scientific.net/kem.434-435.477.

IEEE

Z. Fu et al., “W-Doped DLC Films by IBD and MS,” Key engineering materials, vol. 434-435, pp. 477–480, 2010, doi: 10.4028/www.scientific.net/kem.434-435.477.

BibTeX

@article{fu2010doped,
  title     = {{W-Doped DLC Films by IBD and MS}},
  author    = {Fu, Zhiqiang and Wang, Cheng Biao and Wang, Wei and Peng, Zhi Jian and Yu, Xiang and Lin, Song and Dai, Ming Jiang},
  journal   = {Key engineering materials},
  year      = {2010},
  volume    = {434-435},
  pages     = {477--480},
  doi       = {10.4028/www.scientific.net/kem.434-435.477},
  url       = {https://doi.org/10.4028/www.scientific.net/kem.434-435.477}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201322
201422
201511

Its field-weighted citation impact is 0.81: it has been cited 0.81 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • ion beam deposition
  • magnetron sputtering
  • sp3/sp2 carbon ratio
  • tungsten carbide content
  • film defects
  • hardness
  • elastic modulus
  • film-substrate adhesion

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Fu, Z., Wang, C. B., Wang, W., Peng, Z. J., Yu, X., Lin, S., & Dai, M. J. (2010). W-Doped DLC Films by IBD and MS. Key engineering materials, 434-435, 477–480. https://doi.org/10.4028/www.scientific.net/kem.434-435.477

How many times has this paper been cited?

5 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Key engineering materials: sign in and open the full text from this page.

Who wrote this paper?

Zhiqiang Fu, Cheng Biao Wang, Wei Wang, Zhi Jian Peng, Xiang Yu, Song Lin, Ming Jiang Dai.

What is the DOI of this paper?

10.4028/www.scientific.net/kem.434-435.477, permanently at https://doi.org/10.4028/www.scientific.net/kem.434-435.477. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.