Conference paper · 2021 · Open access

Vision-Based Shape Reconstruction of Soft Continuum Arms Using a Geometric Strain Parametrization

Ali AlBeladi, Girish Krishnan, Mohamed-Ali Belabbas, Seth Hutchinson

Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, 11753–11759 · Published 30 May 2021 · DOI 10.1109/icra48506.2021.9560751

Open PDFView at the publisherCite this paper

In brief

“Vision-Based Shape Reconstruction of Soft Continuum Arms Using a Geometric Strain Parametrization” is a 2021 conference paper by Ali AlBeladi and 3 co-authors, published in Proceedings - IEEE International Conference on Robotics and Automation/Proceedings. OpenAlex counts 19 citations as of 22 November 2026. It is open access under a CC BY-NC-SA licence: the full text is free to read at arXiv (Cornell University).

Citations
19
Most cited in
2024 (7)
Field-weighted impact
5.31
References
34
Authors
4

Abstract

Interest in soft continuum arms has increased as their inherent material elasticity enables safe and adaptive interactions with the environment. However to achieve full autonomy in these arms, accurate three-dimensional shape sensing is needed. Vision-based solutions have been found to be effective in estimating the shape of soft continuum arms. In this paper, a vision-based shape estimator that utilizes a geometric strain based representation for the soft continuum arm’s shape, is proposed. This representation reduces the dimension of the curved shape to a finite set of strain basis functions, thereby allowing for efficient optimization for the shape that best fits the observed image. Experimental results demonstrate the effectiveness of the proposed approach in estimating the end effector with accuracy less than the soft arm’s radius. Multiple basis functions are also analyzed and compared for the specific soft continuum arm in use.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

AlBeladi, A., Krishnan, G., Belabbas, M.-A., & Hutchinson, S. (2021). Vision-Based Shape Reconstruction of Soft Continuum Arms Using a Geometric Strain Parametrization. Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, 11753–11759. https://doi.org/10.1109/icra48506.2021.9560751

MLA 9

AlBeladi, Ali, et al. “Vision-Based Shape Reconstruction of Soft Continuum Arms Using a Geometric Strain Parametrization.” Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, 2021, pp. 11753–11759. https://doi.org/10.1109/icra48506.2021.9560751.

Chicago

AlBeladi, Ali, Girish Krishnan, Mohamed-Ali Belabbas, and Seth Hutchinson. 2021. “Vision-Based Shape Reconstruction of Soft Continuum Arms Using a Geometric Strain Parametrization.” Proceedings - IEEE International Conference on Robotics and Automation/Proceedings: 11753–11759. https://doi.org/10.1109/icra48506.2021.9560751.

Harvard

AlBeladi, A. et al. (2021) ‘Vision-Based Shape Reconstruction of Soft Continuum Arms Using a Geometric Strain Parametrization’, Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, pp. 11753–11759. doi:10.1109/icra48506.2021.9560751.

IEEE

A. AlBeladi, G. Krishnan, M.-A. Belabbas, and S. Hutchinson, “Vision-Based Shape Reconstruction of Soft Continuum Arms Using a Geometric Strain Parametrization,” Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, pp. 11753–11759, 2021, doi: 10.1109/icra48506.2021.9560751.

BibTeX

@inproceedings{albeladi2021vision,
  title     = {{Vision-Based Shape Reconstruction of Soft Continuum Arms Using a Geometric Strain Parametrization}},
  author    = {AlBeladi, Ali and Krishnan, Girish and Belabbas, Mohamed-Ali and Hutchinson, Seth},
  booktitle = {Proceedings - IEEE International Conference on Robotics and Automation/Proceedings},
  year      = {2021},
  pages     = {11753--11759},
  doi       = {10.1109/icra48506.2021.9560751},
  url       = {https://doi.org/10.1109/icra48506.2021.9560751}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202122
202244
202322
202477
202533
202611

Its field-weighted citation impact is 5.31: it has been cited 5.31 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • shape recovery
  • dimensionality reduction
  • soft robotics
  • 3D shape sensing

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

AlBeladi, A., Krishnan, G., Belabbas, M.-A., & Hutchinson, S. (2021). Vision-Based Shape Reconstruction of Soft Continuum Arms Using a Geometric Strain Parametrization. Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, 11753–11759. https://doi.org/10.1109/icra48506.2021.9560751

How many times has this paper been cited?

19 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at arXiv (Cornell University): sign in and open the PDF from this page.

Who wrote this paper?

Ali AlBeladi, Girish Krishnan, Mohamed-Ali Belabbas, Seth Hutchinson.

What is the DOI of this paper?

10.1109/icra48506.2021.9560751, permanently at https://doi.org/10.1109/icra48506.2021.9560751. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.