Journal article · 2016 · Open access
Velocity calibration for microseismic event location using surface data
Petroleum Science, 13(2), 225–236 · Published 20 April 2016 · DOI 10.1007/s12182-016-0092-7
In brief
“Velocity calibration for microseismic event location using surface data” is a 2016 journal article by Hai-Yu Jiang and 4 co-authors, published in Petroleum Science. OpenAlex counts 15 citations as of 21 November 2026. It is open access under a CC BY licence: the full text is free to read at Petroleum Science.
- Citations
- 15
- Most cited in
- 2016 (3)
- Field-weighted impact
- 0.95
- References
- 30
- Authors
- 5
Abstract
Because surface-based monitoring of hydraulic fracturing is not restricted by borehole geometry or the difficulties in maintaining subsurface equipment, it is becoming an increasingly common part of microseismic monitoring. The ability to determine an accurate velocity model for the monitored area directly affects the accuracy of microseismic event locations. However, velocity model calibration for location with surface instruments is difficult for several reasons: well log measurements are often inaccurate or incomplete, yielding intractable models; origin times of perforation shots are not always accurate; and the non-uniqueness of velocity models obtained by inversion becomes especially problematic when only perforation shots are used. In this paper, we propose a new approach to overcome these limitations. We establish an initial velocity model from well logging data, and then use the root mean square (RMS) error of double-difference arrival times as a proxy measure for the misfit between the well log velocity model and the true velocity structure of the medium. Double-difference RMS errors are reduced by using a very fast simulated annealing for model perturbance, and a sample set of double-difference RMS errors is then selected to determine an empirical threshold. This threshold value is set near the minimum RMS of the selected samples, and an appropriate number of travel times within the threshold range are chosen. The corresponding velocity models are then used to relocate the perforation-shot. We use the velocity model with the smallest relative location errors as the basis for microseismic location. Numerical analysis with exact input velocity models shows that although large differences exist between the calculated and true velocity models, perforation shots can still be located to their actual positions with the proposed technique; the location inaccuracy of the perforation is <2 m. Further tests on field data demonstrate the validity of this technique.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Jiang, H.-Y., Chen, Z., Zeng, X., Lv, H., & Liu, X. (2016). Velocity calibration for microseismic event location using surface data. Petroleum Science, 13(2), 225–236. https://doi.org/10.1007/s12182-016-0092-7
MLA 9
Jiang, Hai-Yu, et al. “Velocity calibration for microseismic event location using surface data.” Petroleum Science, vol. 13, no. 2, 2016, pp. 225–236. https://doi.org/10.1007/s12182-016-0092-7.
Chicago
Jiang, Hai-Yu, Zubin Chen, Xiaoxian Zeng, Hao Lv, and Xin Liu. 2016. “Velocity calibration for microseismic event location using surface data.” Petroleum Science 13 (2): 225–236. https://doi.org/10.1007/s12182-016-0092-7.
Harvard
Jiang, H.-Y. et al. (2016) ‘Velocity calibration for microseismic event location using surface data’, Petroleum Science, 13(2), pp. 225–236. doi:10.1007/s12182-016-0092-7.
IEEE
H.-Y. Jiang, Z. Chen, X. Zeng, H. Lv, and X. Liu, “Velocity calibration for microseismic event location using surface data,” Petroleum Science, vol. 13, no. 2, pp. 225–236, 2016, doi: 10.1007/s12182-016-0092-7.
BibTeX
@article{jiang2016velocity,
title = {{Velocity calibration for microseismic event location using surface data}},
author = {Jiang, Hai-Yu and Chen, Zubin and Zeng, Xiaoxian and Lv, Hao and Liu, Xin},
journal = {Petroleum Science},
year = {2016},
volume = {13},
number = {2},
pages = {225--236},
doi = {10.1007/s12182-016-0092-7},
url = {https://doi.org/10.1007/s12182-016-0092-7}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2016 | 3 | |
| 2017 | 2 | |
| 2018 | 1 | |
| 2019 | 1 | |
| 2020 | 1 | |
| 2021 | 3 | |
| 2023 | 1 | |
| 2024 | 1 | |
| 2026 | 2 |
Its field-weighted citation impact is 0.95: it has been cited 0.95 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Energy › Fuel Technology › Hydraulic Fracturing and Reservoir Analysis
- velocity model calibration
- microseismic event location
- hydraulic fracturing
- simulated annealing
- travel time inversion
Work with this paper
Most-cited papers in Energy
- Electrochemical Photolysis of Water at a Semiconductor ElectrodeAkira Fujishima, Kenichi Honda · Nature · 1972 · 34,586 citations
- A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 filmsBrian C. O’Regan, Michaël Grätzel · Nature · 1991 · 28,861 citations
- Environmental Applications of Semiconductor PhotocatalysisMichael Robert Hoffmann, Scot T. Martin, Wonyong Choi and 1 more · Chemical Reviews · 1995 · 18,693 citations
- Electrical Energy Storage for the Grid: A Battery of ChoicesBruce Dunn, Haresh Kamath, Jean‐Marie Tarascon · Science · 2011 · 15,286 citations
- Origin of the Overpotential for Oxygen Reduction at a Fuel-Cell CathodeJens K. Nørskov, Jan Rossmeisl, Áshildur Logadóttir and 4 more · The Journal of Physical Chemistry B · 2004 · 13,331 citations
Questions about this paper
How do I cite this paper in APA style?
Jiang, H.-Y., Chen, Z., Zeng, X., Lv, H., & Liu, X. (2016). Velocity calibration for microseismic event location using surface data. Petroleum Science, 13(2), 225–236. https://doi.org/10.1007/s12182-016-0092-7
How many times has this paper been cited?
15 times, according to OpenAlex on 21 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Petroleum Science: sign in and open the PDF from this page.
Who wrote this paper?
Hai-Yu Jiang, Zubin Chen, Xiaoxian Zeng, Hao Lv, Xin Liu.
What is the DOI of this paper?
10.1007/s12182-016-0092-7, permanently at https://doi.org/10.1007/s12182-016-0092-7. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 21 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.