Journal article · 2002 · Open access

Ultrahigh-rate Deposition of Amorphous Silicon Films for Solar Cells by Atmospheric Pressure Plasma CVD.

Yuzo Mori, Hiroaki Kakiuchi, Kumayasu Yoshii, Kiyoshi Yasutake, Mitsuhiro Matsumoto, Yusuke Ebata

Journal of the Japan Society for Precision Engineering, 68(8), 1077–1081 · Published 1 January 2002 · DOI 10.2493/jjspe.68.1077

Free PDFView at the publisherCite this paper

In brief

“Ultrahigh-rate Deposition of Amorphous Silicon Films for Solar Cells by Atmospheric Pressure Plasma CVD.” is a 2002 journal article by Yuzo Mori and 5 co-authors, published in Journal of the Japan Society for Precision Engineering. OpenAlex counts 1 citations as of 16 November 2026. It is open access: the full text is free to read at Journal of the Japan Society for Precision Engineering.

Citations
1
Field-weighted impact
0.34
Authors
6

Abstract

Further investigations to improve the quality of the amorphous silicon (a-Si) films fabricated at extremely high deposition rate by atmospheric pressure plasma CVD were performed. The electrical and optical properties of the films were investigated with the measurements of photo and dark conductivity and optical absorption, and the relationship between each deposition parameter and the film properties was studied. It became clear that the optimum input power and the deposition gap existed for both of increasing the deposition rate and improving the film properties. Furthermore, the optical gap (E opt) could be controlled by the hydrogen concentration in the plasma and the substrate temperature. As a result of optimizing the deposition parameters, it became possible to improve the film quality under the ultrahigh-rate deposition condition. The maximum deposition rate of the device-quality a-Si film was 0.28μm/s. At this deposition condition, it might be possible by scanning substrate to form a-Si film of the thickness of 0.3μm on the substrate of 1m×1m area in 200 seconds, which was more than 10 times faster than the conventional plasma CVD process. E opt of the device-quality film was in the range of 1.58≤E opt≤1/68V, , which was similar to that of a-Si film fabricated by the conventional plasma CVD at low deposition rate.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Mori, Y., Kakiuchi, H., Yoshii, K., Yasutake, K., Matsumoto, M., & Ebata, Y. (2002). Ultrahigh-rate Deposition of Amorphous Silicon Films for Solar Cells by Atmospheric Pressure Plasma CVD. Journal of the Japan Society for Precision Engineering, 68(8), 1077–1081. https://doi.org/10.2493/jjspe.68.1077

MLA 9

Mori, Yuzo, et al. “Ultrahigh-rate Deposition of Amorphous Silicon Films for Solar Cells by Atmospheric Pressure Plasma CVD.” Journal of the Japan Society for Precision Engineering, vol. 68, no. 8, 2002, pp. 1077–1081. https://doi.org/10.2493/jjspe.68.1077.

Chicago

Mori, Yuzo, Hiroaki Kakiuchi, Kumayasu Yoshii, Kiyoshi Yasutake, Mitsuhiro Matsumoto, and Yusuke Ebata. 2002. “Ultrahigh-rate Deposition of Amorphous Silicon Films for Solar Cells by Atmospheric Pressure Plasma CVD.” Journal of the Japan Society for Precision Engineering 68 (8): 1077–1081. https://doi.org/10.2493/jjspe.68.1077.

Harvard

Mori, Y. et al. (2002) ‘Ultrahigh-rate Deposition of Amorphous Silicon Films for Solar Cells by Atmospheric Pressure Plasma CVD.’, Journal of the Japan Society for Precision Engineering, 68(8), pp. 1077–1081. doi:10.2493/jjspe.68.1077.

IEEE

Y. Mori, H. Kakiuchi, K. Yoshii, K. Yasutake, M. Matsumoto, and Y. Ebata, “Ultrahigh-rate Deposition of Amorphous Silicon Films for Solar Cells by Atmospheric Pressure Plasma CVD.,” Journal of the Japan Society for Precision Engineering, vol. 68, no. 8, pp. 1077–1081, 2002, doi: 10.2493/jjspe.68.1077.

BibTeX

@article{mori2002ultrahigh,
  title     = {{Ultrahigh-rate Deposition of Amorphous Silicon Films for Solar Cells by Atmospheric Pressure Plasma CVD.}},
  author    = {Mori, Yuzo and Kakiuchi, Hiroaki and Yoshii, Kumayasu and Yasutake, Kiyoshi and Matsumoto, Mitsuhiro and Ebata, Yusuke},
  journal   = {Journal of the Japan Society for Precision Engineering},
  year      = {2002},
  volume    = {68},
  number    = {8},
  pages     = {1077--1081},
  doi       = {10.2493/jjspe.68.1077},
  url       = {https://doi.org/10.2493/jjspe.68.1077}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Thin-Film Transistor Technologies

  • amorphous silicon thin films
  • thin-film solar cells
  • substrate temperature
  • input power optimization
  • film quality
  • photoconductivity
  • optical absorption

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Mori, Y., Kakiuchi, H., Yoshii, K., Yasutake, K., Matsumoto, M., & Ebata, Y. (2002). Ultrahigh-rate Deposition of Amorphous Silicon Films for Solar Cells by Atmospheric Pressure Plasma CVD. Journal of the Japan Society for Precision Engineering, 68(8), 1077–1081. https://doi.org/10.2493/jjspe.68.1077

How many times has this paper been cited?

1 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Journal of the Japan Society for Precision Engineering.

Who wrote this paper?

Yuzo Mori, Hiroaki Kakiuchi, Kumayasu Yoshii, Kiyoshi Yasutake, Mitsuhiro Matsumoto, Yusuke Ebata.

What is the DOI of this paper?

10.2493/jjspe.68.1077. The permanent link is https://doi.org/10.2493/jjspe.68.1077.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.