Journal article · 2024 · Open access
UKF-Based IMU–LiDAR Sensor Fusion Method for Robot Navigation in Feature-Minimal Indoor Environments
Journal of Electrical Engineering, 2(01), 9–13 · Published 30 January 2024 · DOI 10.54209/elimensi.v2i01.425
In brief
“UKF-Based IMU–LiDAR Sensor Fusion Method for Robot Navigation in Feature-Minimal Indoor Environments” is a 2024 journal article by Revly Sianipar, published in Journal of Electrical Engineering. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY-SA licence: the full text is free to read at Journal of Electrical Engineering.
- Citations
- 0
- References
- 9
- Authors
- 1
Abstract
This paper proposes an Unscented Kalman Filter (UKF)-based IMU–LiDAR sensor fusion method for autonomous robot navigation in feature-poor enclosed spaces (homogeneous corridors, plain walls, changing lighting), conditions that often weaken LiDAR scan matching and cause large drifts in pure IMU integration. The proposed architecture models motion dynamics in error-state with online-estimated gyroscope/accelerometer biases, while LiDAR measurements are extracted as scan-to-submap constraints that are condensed into adaptive uncertainty relative pose observations. Time synchronization and extrinsic IMU–LiDAR calibration are performed on-the-fly using weak priors to maintain system stability despite time offsets. Evaluation on three indoor scenarios (a 40 m corridor, a 60 m L-aisle, and a 30 × 20 m warehouse with minimal texture) shows a 42–58% reduction in positional RMSE compared to LiDAR-only ICP and 73–81% compared to IMU-only, with translational drift < 0.6% of the distance traveled and heading drift < 0.35°/min. The system runs in real-time at 20–30 Hz on a mid-range CPU, maintaining a 100% localization success rate with no tracking failures at velocities of 0.4–1.2 m/s. These results confirm that UKF with adaptive uncertainty modeling and bias estimation is capable of integrating LiDAR inertial and geometric forces to produce accurate and robust state estimation in feature-poor indoor environments, while providing an efficient foundation for advanced trajectory planning and motion control.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Sianipar, R. (2024). UKF-Based IMU–LiDAR Sensor Fusion Method for Robot Navigation in Feature-Minimal Indoor Environments. Journal of Electrical Engineering, 2(01), 9–13. https://doi.org/10.54209/elimensi.v2i01.425
MLA 9
Sianipar, Revly. “UKF-Based IMU–LiDAR Sensor Fusion Method for Robot Navigation in Feature-Minimal Indoor Environments.” Journal of Electrical Engineering, vol. 2, no. 01, 2024, pp. 9–13. https://doi.org/10.54209/elimensi.v2i01.425.
Chicago
Sianipar, Revly. 2024. “UKF-Based IMU–LiDAR Sensor Fusion Method for Robot Navigation in Feature-Minimal Indoor Environments.” Journal of Electrical Engineering 2 (01): 9–13. https://doi.org/10.54209/elimensi.v2i01.425.
Harvard
Sianipar, R. (2024) ‘UKF-Based IMU–LiDAR Sensor Fusion Method for Robot Navigation in Feature-Minimal Indoor Environments’, Journal of Electrical Engineering, 2(01), pp. 9–13. doi:10.54209/elimensi.v2i01.425.
IEEE
R. Sianipar, “UKF-Based IMU–LiDAR Sensor Fusion Method for Robot Navigation in Feature-Minimal Indoor Environments,” Journal of Electrical Engineering, vol. 2, no. 01, pp. 9–13, 2024, doi: 10.54209/elimensi.v2i01.425.
BibTeX
@article{sianipar2024based,
title = {{UKF-Based IMU–LiDAR Sensor Fusion Method for Robot Navigation in Feature-Minimal Indoor Environments}},
author = {Sianipar, Revly},
journal = {Journal of Electrical Engineering},
year = {2024},
volume = {2},
number = {01},
pages = {9--13},
doi = {10.54209/elimensi.v2i01.425},
url = {https://doi.org/10.54209/elimensi.v2i01.425}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Robotics and Sensor-Based Localization
- unscented Kalman filter
- autonomous robot navigation
- scan matching
- extrinsic calibration
- clock synchronization
- bias estimation
- localization drift
- warehouse navigation
Work with this paper
Most-cited papers in Computer Science
- ImageNet classification with deep convolutional neural networksAlex Krizhevsky, Ilya Sutskever, Geoffrey E. Hinton · Communications of the ACM · 2017 · 114,726 citations
- Long Short-Term MemorySepp Hochreiter, Jürgen Schmidhuber · Neural Computation · 1997 · 109,097 citations
- A Mathematical Theory of CommunicationClaude E. Shannon · Bell System Technical Journal · 1948 · 91,736 citations
- Deep learningYann LeCun, Yoshua Bengio, Geoffrey E. Hinton · Nature · 2015 · 90,226 citations
- Faster R-CNN: Towards Real-Time Object Detection with Region Proposal NetworksShaoqing Ren, Kaiming He, Ross Girshick and 1 more · IEEE Transactions on Pattern Analysis and Machine Intelligence · 2016 · 74,143 citations
Questions about this paper
How do I cite this paper in APA style?
Sianipar, R. (2024). UKF-Based IMU–LiDAR Sensor Fusion Method for Robot Navigation in Feature-Minimal Indoor Environments. Journal of Electrical Engineering, 2(01), 9–13. https://doi.org/10.54209/elimensi.v2i01.425
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Journal of Electrical Engineering: sign in and open the PDF from this page.
Who wrote this paper?
Revly Sianipar.
What is the DOI of this paper?
10.54209/elimensi.v2i01.425, permanently at https://doi.org/10.54209/elimensi.v2i01.425. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.