Journal article · 2020 · Open access

Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry

Olga S. Stolbova, K.A. Tikhomirova

PNRPU Mechanics Bulletin, 109–125 · Published 15 December 2020 · DOI 10.15593/perm.mech/2020.1.09

Open PDFView at the publisherCite this paper

In brief

“Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry” is a 2020 journal article by Olga S. Stolbova and K.A. Tikhomirova, published in PNRPU Mechanics Bulletin. OpenAlex counts 2 citations as of 22 November 2026, which puts it in the top 8% of works published in 2020 by citations. It is open access under a CC BY-NC licence: the full text is free to read at PNRPU Mechanics Bulletin.

Citations
2
Most cited in
2023 (2)
Field-weighted impact
0.17
References
32
Authors
2

Abstract

Two methods for calculating the phase-structural deformations of shape memory alloy (SMA) structures under complex stress conditions are considered. They both are based on the one-dimensional phenomenological model, which is built upon the relationship between the direct transformation and martensitic inelasticity diagrams, which makes it possible to uniformly describe strains in the phase and structural transformations, since both of the strain components are associated with the formation of oriented martensite. The ability of the model to describe a number of basic macromechanical effects caused by martensitic transformations in SMA was shown in our previous work. After the generalization to the case of a complex stress state it can successfully be used for solving certain engineering problems. The generalization of the model can be accomplished in two ways. The first method involves the construction of three-dimensional constitutive relations, proceeding from the previously developed one-dimensional relations and some simplifying hypotheses, and the numerical implementation of these relations by the finite element method. The second is the structural method, applicable to structures, in which the stress-strain state is described by one kinematic and one force parameter. This method suggests the use of structural diagrams of direct transformation and martensitic inelasticity, which are similar to the corresponding material diagrams, but establish the dependence of the phase-structural component of the kinematic parameter on the force parameter (not the dependence of phase-structural strains on the stress). Although the structural method is associated with the necessity to experimentally determine the structural diagrams, it has the advantage of significantly reducing the computational costs. Additionally, the article presents a comparison of two methods for describing the tension-compression asymmetry, and also develops a method taking finite deformations into account.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Stolbova, O. S., & Tikhomirova, K. (2020). Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry. PNRPU Mechanics Bulletin, 109–125. https://doi.org/10.15593/perm.mech/2020.1.09

MLA 9

Stolbova, Olga S., and K.A. Tikhomirova. “Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry.” PNRPU Mechanics Bulletin, no. 1, 2020, pp. 109–125. https://doi.org/10.15593/perm.mech/2020.1.09.

Chicago

Stolbova, Olga S. and K.A. Tikhomirova. 2020. “Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry.” PNRPU Mechanics Bulletin (1): 109–125. https://doi.org/10.15593/perm.mech/2020.1.09.

Harvard

Stolbova, O. S. and Tikhomirova, K. (2020) ‘Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry’, PNRPU Mechanics Bulletin, pp. 109–125. doi:10.15593/perm.mech/2020.1.09.

IEEE

O. S. Stolbova and K. Tikhomirova, “Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry,” PNRPU Mechanics Bulletin, no. 1, pp. 109–125, 2020, doi: 10.15593/perm.mech/2020.1.09.

BibTeX

@article{stolbova2020methods,
  title     = {{Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry}},
  author    = {Stolbova, Olga S. and Tikhomirova, K.A.},
  journal   = {PNRPU Mechanics Bulletin},
  year      = {2020},
  number    = {1},
  pages     = {109--125},
  doi       = {10.15593/perm.mech/2020.1.09},
  url       = {https://doi.org/10.15593/perm.mech/2020.1.09}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • shape memory alloys
  • stress-strain state
  • tension-compression asymmetry
  • martensitic transformation
  • phenomenological constitutive model
  • structural method
  • large deformation

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Stolbova, O. S., & Tikhomirova, K. (2020). Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry. PNRPU Mechanics Bulletin, 109–125. https://doi.org/10.15593/perm.mech/2020.1.09

How many times has this paper been cited?

2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at PNRPU Mechanics Bulletin: sign in and open the PDF from this page.

Who wrote this paper?

Olga S. Stolbova, K.A. Tikhomirova.

What is the DOI of this paper?

10.15593/perm.mech/2020.1.09, permanently at https://doi.org/10.15593/perm.mech/2020.1.09. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.