Journal article · 2024 · Open access
Tuning the crystallinity of titanium nitride on copper‐embedded carbon nanofiber interlayers for accelerated electrochemical kinetics in lithium–sulfur batteries
Carbon Energy, 6(6), e450 · Published 22 January 2024 · DOI 10.1002/cey2.450
In brief
“Tuning the crystallinity of titanium nitride on copper‐embedded carbon nanofiber interlayers for accelerated electrochemical kinetics in lithium–sulfur batteries” is a 2024 journal article by Yinyu Xiang and 6 co-authors, published in Carbon Energy. OpenAlex counts 45 citations as of 21 November 2026, which puts it in the top 2% of works published in 2024 by citations. It is open access under a CC BY licence: the full text is free to read at Carbon Energy.
- Citations
- 45
- Most cited in
- 2026 (19)
- Field-weighted impact
- 3.91
- References
- 72
- Authors
- 7
Abstract
The development of lithium–sulfur (Li–S) batteries is hindered by the disadvantages of shuttling of polysulfides and the sluggish redox kinetics of the conversion of sulfur species during discharge and charge. Herein, the crystallinities of a titanium nitride (TiN) film on copper‐embedded carbon nanofibers (Cu‐CNFs) are regulated and the nanofibers are used as interlayers to resolve the aforementioned crucial issues. A low‐crystalline TiN‐coated Cu‐CNF (L‐TiN‐Cu‐CNF) interlayer is compared with its highly crystalline counterpart (H‐TiN‐Cu‐CNFs). It is demonstrated that the L‐TiN coating not only strengthens the chemical adsorption toward polysulfides but also greatly accelerates the electrochemical conversion of polysulfides. Due to robust carbon frameworks and enhanced kinetics, impressive high‐rate performance at 2 C (913 mAh g−1 based on sulfur) as well as remarkable cyclic stability up to 300 cycles (626 mAh g−1) with capacity retention of 46.5% is realized for L‐TiN‐Cu‐CNF interlayer‐configured Li–S batteries. Even under high loading (3.8 mg cm−2) of sulfur and relatively lean electrolyte (10 μL electrolyte per milligram sulfur) conditions, the Li–S battery equipped with L‐TiN‐Cu‐CNF interlayers delivers a high capacity of 1144 mAh g−1 with cathodic capacity of 4.25 mAh cm−2 at 0.1 C, providing a potential pathway toward the design of multifunctional interlayers for highly efficient Li–S batteries.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Xiang, Y., Lu, L., Yan, F., Sengupta, D., Rudolf, P., Kottapalli, A. G. P., & Pei, Y. T. (2024). Tuning the crystallinity of titanium nitride on copper‐embedded carbon nanofiber interlayers for accelerated electrochemical kinetics in lithium–sulfur batteries. Carbon Energy, 6(6), e450. https://doi.org/10.1002/cey2.450
MLA 9
Xiang, Yinyu, et al. “Tuning the crystallinity of titanium nitride on copper‐embedded carbon nanofiber interlayers for accelerated electrochemical kinetics in lithium–sulfur batteries.” Carbon Energy, vol. 6, no. 6, 2024, p. e450. https://doi.org/10.1002/cey2.450.
Chicago
Xiang, Yinyu, Liqiang Lu, Feng Yan, Debarun Sengupta, Petra Rudolf, Ajay Giri Prakash Kottapalli, and Yutao T. Pei. 2024. “Tuning the crystallinity of titanium nitride on copper‐embedded carbon nanofiber interlayers for accelerated electrochemical kinetics in lithium–sulfur batteries.” Carbon Energy 6 (6): e450. https://doi.org/10.1002/cey2.450.
Harvard
Xiang, Y. et al. (2024) ‘Tuning the crystallinity of titanium nitride on copper‐embedded carbon nanofiber interlayers for accelerated electrochemical kinetics in lithium–sulfur batteries’, Carbon Energy, 6(6), p. e450. doi:10.1002/cey2.450.
IEEE
Y. Xiang et al., “Tuning the crystallinity of titanium nitride on copper‐embedded carbon nanofiber interlayers for accelerated electrochemical kinetics in lithium–sulfur batteries,” Carbon Energy, vol. 6, no. 6, p. e450, 2024, doi: 10.1002/cey2.450.
BibTeX
@article{xiang2024tuning,
title = {{Tuning the crystallinity of titanium nitride on copper‐embedded carbon nanofiber interlayers for accelerated electrochemical kinetics in lithium–sulfur batteries}},
author = {Xiang, Yinyu and Lu, Liqiang and Yan, Feng and Sengupta, Debarun and Rudolf, Petra and Kottapalli, Ajay Giri Prakash and Pei, Yutao T.},
journal = {Carbon Energy},
year = {2024},
volume = {6},
number = {6},
pages = {e450},
doi = {10.1002/cey2.450},
url = {https://doi.org/10.1002/cey2.450}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 8 | |
| 2025 | 18 | |
| 2026 | 19 |
Its field-weighted citation impact is 3.91: it has been cited 3.91 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- lithium-sulfur batteries
- TiN coating
- interfacial layer
- crystallinity control
- polysulfide shuttle suppression
- polysulfide adsorption
- electrochemical kinetics
- sulfur cathode
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Xiang, Y., Lu, L., Yan, F., Sengupta, D., Rudolf, P., Kottapalli, A. G. P., & Pei, Y. T. (2024). Tuning the crystallinity of titanium nitride on copper‐embedded carbon nanofiber interlayers for accelerated electrochemical kinetics in lithium–sulfur batteries. Carbon Energy, 6(6), e450. https://doi.org/10.1002/cey2.450
How many times has this paper been cited?
45 times, according to OpenAlex on 21 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Carbon Energy: sign in and open the PDF from this page.
Who wrote this paper?
Yinyu Xiang, Liqiang Lu, Feng Yan, Debarun Sengupta, Petra Rudolf, Ajay Giri Prakash Kottapalli, Yutao T. Pei.
What is the DOI of this paper?
10.1002/cey2.450, permanently at https://doi.org/10.1002/cey2.450. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 21 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.