Journal article · 2023 · Open access
Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power
Frontiers in Materials, 10 · Published 7 February 2023 · DOI 10.3389/fmats.2023.1145631
In brief
“Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power” is a 2023 journal article by Xinyu Liu and 4 co-authors, published in Frontiers in Materials. OpenAlex counts 26 citations as of 19 November 2026, which puts it in the top 7% of works published in 2023 by citations. It is open access under a CC BY licence: the full text is free to read at Frontiers in Materials.
- Citations
- 26
- Most cited in
- 2026 (12)
- Field-weighted impact
- 2.28
- References
- 43
- Authors
- 5
Abstract
Introduction: Recently, great efforts have been dedicated to tailoring the microstructure of the RHEA films to further optimize the performance of the films. However, there is still a lack of in-depth study on their wear mechanism and microstructure evolution. Methods: In this work, the novel ZrNbTiMo RHEA films were prepared by DC magnetron sputtering and splicing target techniques. The effects of sputtering power on the microstructure, hardness, toughness, and wear resistance of ZrNbTiMo RHEA films were investigated in detail. Results: The ZrNbTiMo films possess the nanocomposite structure, the bcc nanocrystal is wrapped in an amorphous phase. The wear resistance of the film is expected to be improved by finding an appropriate ratio between the amorphous phase and the nanocrystal phase. The nanocrystal structure ensures the high hardness (6.547 ∼ 7.560 GPa) of the ZrNbTiMo film. In addition, the nanocrystals hinder crack propagation, this toughness mechanism effectively improves the toughness of the film. The ZrNbTiMo film prepared at 150 W possesses excellent mechanical properties, hardness of 7.240 GPa and toughness of 0.437 ± 0.040 MPa × m 1/2 , exhibits better wear resistance (wear rate: 5.223 × 10 −7 mm 3 /N m). Discussion: The wear resistance of ZrNbTiMo film is controlled by both hardness and toughness. The nanocomposite structure makes the ZrNbTiMo films possess a composite fracture which could improve the toughness of the ZrNbTiMo film. The wear-resistant ZrNbTiMo RHEA films with wear rates of the order of 10 −6 mm 3 /N m have been prepared by tuning the sputtering power, this film can be used as a potential candidate for wear-resistant coatings.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Liu, X., Cai, W., Zhang, Y., Wang, L., & Wang, J. (2023). Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power. Frontiers in Materials, 10. https://doi.org/10.3389/fmats.2023.1145631
MLA 9
Liu, Xinyu, et al. “Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power.” Frontiers in Materials, vol. 10, 2023. https://doi.org/10.3389/fmats.2023.1145631.
Chicago
Liu, Xinyu, Wumin Cai, Yan Zhang, Linqing Wang, and Junjun Wang. 2023. “Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power.” Frontiers in Materials 10. https://doi.org/10.3389/fmats.2023.1145631.
Harvard
Liu, X. et al. (2023) ‘Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power’, Frontiers in Materials, 10. doi:10.3389/fmats.2023.1145631.
IEEE
X. Liu, W. Cai, Y. Zhang, L. Wang, and J. Wang, “Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power,” Frontiers in Materials, vol. 10, 2023, doi: 10.3389/fmats.2023.1145631.
BibTeX
@article{liu2023tuning,
title = {{Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power}},
author = {Liu, Xinyu and Cai, Wumin and Zhang, Yan and Wang, Linqing and Wang, Junjun},
journal = {Frontiers in Materials},
year = {2023},
volume = {10},
doi = {10.3389/fmats.2023.1145631},
url = {https://doi.org/10.3389/fmats.2023.1145631}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2023 | 2 | |
| 2024 | 5 | |
| 2025 | 7 | |
| 2026 | 12 |
Its field-weighted citation impact is 2.28: it has been cited 2.28 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › High Entropy Alloys Studies
- refractory high-entropy alloys
- thin films
- sputtering power
- microstructure tailoring
- wear resistance
- hardness
- toughness
- nanocomposite structure
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Liu, X., Cai, W., Zhang, Y., Wang, L., & Wang, J. (2023). Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power. Frontiers in Materials, 10. https://doi.org/10.3389/fmats.2023.1145631
How many times has this paper been cited?
26 times, according to OpenAlex on 19 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Frontiers in Materials: sign in and open the full text from this page.
Who wrote this paper?
Xinyu Liu, Wumin Cai, Yan Zhang, Linqing Wang, Junjun Wang.
What is the DOI of this paper?
10.3389/fmats.2023.1145631, permanently at https://doi.org/10.3389/fmats.2023.1145631. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 19 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.