Journal article · 2026 · Open access

Tunable Texture in ZnO Thin Films on 200 mm Wafers: Comparative Study of Zn(DMP) 2 and Diethylzinc Precursors for ALD

Katherine Guzey, Noah Brechmann, Emad Najafidehaghani, Thomas Gemming, Ivan G. Kaban, Marcel Schmickler, Jean‐Pierre Glauber, Volker Hoffmann, Detlef Rogalla, Nicolás Pérez, Harish Parala, Kornelius Nielsch and 3 more

ACS Applied Electronic Materials, 8(12), 4992–5006 · Published 3 June 2026 · DOI 10.1021/acsaelm.6c00358

Read the free full textCite this paper

In brief

“Tunable Texture in ZnO Thin Films on 200 mm Wafers: Comparative Study of Zn(DMP) 2 and Diethylzinc Precursors for ALD” is a 2026 journal article by Katherine Guzey and 14 co-authors, published in ACS Applied Electronic Materials. OpenAlex counts 0 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at ACS Applied Electronic Materials.

Citations
0
References
77
Authors
15

Abstract

High Resolution Image Download MS PowerPoint Slide Zinc oxide (ZnO) is a technologically important wide-bandgap semiconductor used in optoelectronics, sensing, and transparent electronic devices. Implementing ZnO thin films in such devices requires scalable, uniform, and compatible thin-film deposition methods. Atomic layer deposition (ALD) provides precise control over film thickness, composition, and conformality and is established in the semiconductor industry. ALD processes for growing ZnO primarily rely on the pyrophoric diethylzinc (DEZ) precursor. Recently, bis-3-( N, N -dimethylamino)propyl zinc ([Zn(DMP) 2 ]) has emerged as a promising non-pyrophoric alternative, offering improved handling safety and enhanced thermal stability. However, its use has so far been limited to growth on small substrates in proof-of-concept experiments. In this work, a thermal ALD process using [Zn(DMP) 2 ] and H 2 O as precursors was developed on industrially relevant 200 mm silicon wafers and compared with an established thermal process using DEZ and H 2 O. The effects of deposition temperature (150–300 °C), film thickness, and the underlying substrate material on film growth were systematically investigated. Structural, morphological, chemical, and electrical properties were evaluated using complementary and advanced materials characterization techniques. Across the entire 200 mm wafer area, ZnO films deposited from [Zn(DMP) 2 ] exhibit excellent thickness uniformity and a near-stoichiometric composition comparable to those obtained with DEZ. While slightly higher resistivity and reduced crystallinity are observed at lower deposition temperatures, higher deposition temperatures yield comparable resistivity and an improved c-axis-oriented crystalline texture. Importantly, successful lithographic patterning and electrical characterization of van der Pauw devices confirm compatibility with advanced fabrication workflows. These results demonstrate that [Zn(DMP) 2 ] can compete with DEZ in terms of film quality on large-area wafers and is safer to handle, providing a significant overall advantage.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Guzey, K., Brechmann, N., Najafidehaghani, E., Gemming, T., Kaban, I. G., Schmickler, M., Glauber, J., Hoffmann, V., Rogalla, D., Pérez, N., Parala, H., Nielsch, K., Schall-Giesecke, A. L., Devi, A., & Boysen, N. (2026). Tunable Texture in ZnO Thin Films on 200 mm Wafers: Comparative Study of Zn(DMP) 2 and Diethylzinc Precursors for ALD. ACS Applied Electronic Materials, 8(12), 4992–5006. https://doi.org/10.1021/acsaelm.6c00358

MLA 9

Guzey, Katherine, et al. “Tunable Texture in ZnO Thin Films on 200 mm Wafers: Comparative Study of Zn(DMP) 2 and Diethylzinc Precursors for ALD.” ACS Applied Electronic Materials, vol. 8, no. 12, 2026, pp. 4992–5006. https://doi.org/10.1021/acsaelm.6c00358.

Chicago

Guzey, Katherine, Noah Brechmann, Emad Najafidehaghani, Thomas Gemming, Ivan G. Kaban, Marcel Schmickler, Jean‐Pierre Glauber, et al. 2026. “Tunable Texture in ZnO Thin Films on 200 mm Wafers: Comparative Study of Zn(DMP) 2 and Diethylzinc Precursors for ALD.” ACS Applied Electronic Materials 8 (12): 4992–5006. https://doi.org/10.1021/acsaelm.6c00358.

Harvard

Guzey, K. et al. (2026) ‘Tunable Texture in ZnO Thin Films on 200 mm Wafers: Comparative Study of Zn(DMP) 2 and Diethylzinc Precursors for ALD’, ACS Applied Electronic Materials, 8(12), pp. 4992–5006. doi:10.1021/acsaelm.6c00358.

IEEE

K. Guzey et al., “Tunable Texture in ZnO Thin Films on 200 mm Wafers: Comparative Study of Zn(DMP) 2 and Diethylzinc Precursors for ALD,” ACS Applied Electronic Materials, vol. 8, no. 12, pp. 4992–5006, 2026, doi: 10.1021/acsaelm.6c00358.

BibTeX

@article{guzey2026tunable,
  title     = {{Tunable Texture in ZnO Thin Films on 200 mm Wafers: Comparative Study of Zn(DMP) 2 and Diethylzinc Precursors for ALD}},
  author    = {Guzey, Katherine and Brechmann, Noah and Najafidehaghani, Emad and Gemming, Thomas and Kaban, Ivan G. and Schmickler, Marcel and Glauber, Jean‐Pierre and Hoffmann, Volker and Rogalla, Detlef and Pérez, Nicolás and Parala, Harish and Nielsch, Kornelius and Schall-Giesecke, Anna Lena and Devi, Anjana and Boysen, Nils},
  journal   = {ACS Applied Electronic Materials},
  year      = {2026},
  volume    = {8},
  number    = {12},
  pages     = {4992--5006},
  doi       = {10.1021/acsaelm.6c00358},
  url       = {https://doi.org/10.1021/acsaelm.6c00358}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › ZnO doping and properties

  • ZnO thin films
  • atomic layer deposition
  • diethylzinc precursor
  • 200 mm wafers
  • deposition temperature
  • thickness uniformity
  • electrical resistivity
  • lithographic patterning

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Guzey, K., Brechmann, N., Najafidehaghani, E., Gemming, T., Kaban, I. G., Schmickler, M., Glauber, J., Hoffmann, V., Rogalla, D., Pérez, N., Parala, H., Nielsch, K., Schall-Giesecke, A. L., Devi, A., & Boysen, N. (2026). Tunable Texture in ZnO Thin Films on 200 mm Wafers: Comparative Study of Zn(DMP) 2 and Diethylzinc Precursors for ALD. ACS Applied Electronic Materials, 8(12), 4992–5006. https://doi.org/10.1021/acsaelm.6c00358

How many times has this paper been cited?

0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at ACS Applied Electronic Materials.

Who wrote this paper?

Katherine Guzey, Noah Brechmann, Emad Najafidehaghani, Thomas Gemming, Ivan G. Kaban, Marcel Schmickler, Jean‐Pierre Glauber, Volker Hoffmann, Detlef Rogalla, Nicolás Pérez, Harish Parala, Kornelius Nielsch and 3 more.

What is the DOI of this paper?

10.1021/acsaelm.6c00358. The permanent link is https://doi.org/10.1021/acsaelm.6c00358.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.