Journal article · 2023 · Open access

Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel

Erick Hernández‐Rengifo, Christian Ortíz, Julio Cesar Caicedo, Luis Alfredo Rodríguez, César Magén

The International Journal of Advanced Manufacturing Technology, 128(11-12), 5437–5461 · Published 7 September 2023 · DOI 10.1007/s00170-023-11966-1

Open PDFView at the publisherCite this paper

In brief

“Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel” is a 2023 journal article by Erick Hernández‐Rengifo and 4 co-authors, published in The International Journal of Advanced Manufacturing Technology. OpenAlex counts 3 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Research Square.

Citations
3
Most cited in
2023 (1)
Field-weighted impact
0.30
References
56
Authors
5

Abstract

In recent years, nanocomposite coatings have become relevant in different metal-mechanical processes related to the increase of the tribo-mechanical properties. Therefore, this research is focused on improving mechanical behavior and wear resistance of TiSiCN nanocomposite coating with different power applied on the silicon nitride (Si3N4) target by means of Magnetron Sputtering r.f. technique and synthesized on HSS (High-speed-steel) and oriented silicon (100) substrates. The response of the nanocomposite coatings to power variation were analyzed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM) and instrumented nanoindentation. Ball-On-Disk and Scratch tests were used for tribological characterization. The XRD study determined an FCC structure with a peak of maximum intensity in the plane (200). XPS analysis showed chemical energies in the bonds and stoichiometry. By means of the AFM technique, the tendency to decrease the roughness and grain size were detected, with the increase of the power for the coatings obtained at 500W. From the nanoindentation test, it was possible to stablish increases in mechanical properties as the applied power increases; the best performance was obtained for coating with a 500 W power, where the hardness and elastic modulus were 32 GPa and 301 GPa respectively. The friction coefficient in dry environment decreased with increasing applied power (500 W, 0.31), the critical load produced by adhesive wear was determined for the TiSiCN nanocomposite coatings for the different applied powers, showing the highest critical load in the coating with 500W (62.42 N). Finally, the cutting tests with AISI 1020 steel (workpiece) to assess wear as a function of the applied power. A comparison of the tribological properties revealed a decrease of flank wear (approximately 37%) for ASSAB 17 steel burins coated with TiSiCN nanocomposite coatings with 550 W, when compared to uncoated ASSAB 17 steel burins. These results open a great industrial potential in anti-wear applications.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Hernández‐Rengifo, E., Ortíz, C., Caicedo, J. C., Rodríguez, L. A., & Magén, C. (2023). Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel. The International Journal of Advanced Manufacturing Technology, 128(11-12), 5437–5461. https://doi.org/10.1007/s00170-023-11966-1

MLA 9

Hernández‐Rengifo, Erick, et al. “Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel.” The International Journal of Advanced Manufacturing Technology, vol. 128, no. 11-12, 2023, pp. 5437–5461. https://doi.org/10.1007/s00170-023-11966-1.

Chicago

Hernández‐Rengifo, Erick, Christian Ortíz, Julio Cesar Caicedo, Luis Alfredo Rodríguez, and César Magén. 2023. “Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel.” The International Journal of Advanced Manufacturing Technology 128 (11-12): 5437–5461. https://doi.org/10.1007/s00170-023-11966-1.

Harvard

Hernández‐Rengifo, E. et al. (2023) ‘Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel’, The International Journal of Advanced Manufacturing Technology, 128(11-12), pp. 5437–5461. doi:10.1007/s00170-023-11966-1.

IEEE

E. Hernández‐Rengifo, C. Ortíz, J. C. Caicedo, L. A. Rodríguez, and C. Magén, “Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel,” The International Journal of Advanced Manufacturing Technology, vol. 128, no. 11-12, pp. 5437–5461, 2023, doi: 10.1007/s00170-023-11966-1.

BibTeX

@article{hernandezrengifo2023tribomechanical,
  title     = {{Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel}},
  author    = {Hernández‐Rengifo, Erick and Ortíz, Christian and Caicedo, Julio Cesar and Rodríguez, Luis Alfredo and Magén, César},
  journal   = {The International Journal of Advanced Manufacturing Technology},
  year      = {2023},
  volume    = {128},
  number    = {11-12},
  pages     = {5437--5461},
  doi       = {10.1007/s00170-023-11966-1},
  url       = {https://doi.org/10.1007/s00170-023-11966-1}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202311
202411
202611

Its field-weighted citation impact is 0.30: it has been cited 0.30 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • magnetron sputtering
  • RF sputtering power
  • high-speed steel substrates
  • Si(100) substrate
  • coating hardness
  • elastic modulus
  • friction coefficient
  • adhesive wear

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Hernández‐Rengifo, E., Ortíz, C., Caicedo, J. C., Rodríguez, L. A., & Magén, C. (2023). Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel. The International Journal of Advanced Manufacturing Technology, 128(11-12), 5437–5461. https://doi.org/10.1007/s00170-023-11966-1

How many times has this paper been cited?

3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Research Square: sign in and open the PDF from this page.

Who wrote this paper?

Erick Hernández‐Rengifo, Christian Ortíz, Julio Cesar Caicedo, Luis Alfredo Rodríguez, César Magén.

What is the DOI of this paper?

10.1007/s00170-023-11966-1, permanently at https://doi.org/10.1007/s00170-023-11966-1. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.