Conference paper · 2024 · Open access
TRIBOLOGICAL TESTING OF MULTILAYER TiAlSiN COATING AT HIGH TEMPERATURES
International Scientific Conference MMA – Flexible Technologies (MMA), 165–168 · Published 1 January 2024 · DOI 10.24867/mma-2024-05-002
In brief
“TRIBOLOGICAL TESTING OF MULTILAYER TiAlSiN COATING AT HIGH TEMPERATURES” is a 2024 conference paper by Vladimir Terek and 7 co-authors, published in International Scientific Conference MMA – Flexible Technologies (MMA). OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at International Scientific Conference MMA – Flexible Technologies (MMA).
- Citations
- 0
- References
- 5
- Authors
- 8
Abstract
In this study, multilayer TiAlSiN coating was magnetron sputtered on X15CrNiSi25-22 and IN-100.The tribological behavior of the coating was tested at room temperature (RT), 500, 600, 700 and 800 °C, using a high temperature (HT) tribometer.Al2O3 was used as a counterbody.Wear tracks were evaluated using stylus profilometry, confocal microscopy and scanning electron microscopy.At RT coefficient of friction (COF) values were similar and stable.However, at HT the COF curves exhibited instability across all samples, but the values of COF were comparable among the different substrates.The wear rate was similar at RT, while at HT the IN-100 substrate demonstrated a significantly lower wear rate.Abrasive and adhesive wear mechanisms were predominant.SEM analysis revealed the presence of small protrusions on the surface of the coating deposited on IN-100, where material accumulates during tribo-tests.These protrusions are suggested to have a significant impact on the coating's behavior, particularly regarding wear.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Terek, V., Kovačević, L., Škorić, B., Drnovšek, A., Čekada, M., Bobić, Z., Zagoričnik, M., & Terek, P. (2024). TRIBOLOGICAL TESTING OF MULTILAYER TiAlSiN COATING AT HIGH TEMPERATURES. International Scientific Conference MMA – Flexible Technologies (MMA), 165–168. https://doi.org/10.24867/mma-2024-05-002
MLA 9
Terek, Vladimir, et al. “TRIBOLOGICAL TESTING OF MULTILAYER TiAlSiN COATING AT HIGH TEMPERATURES.” International Scientific Conference MMA – Flexible Technologies (MMA), 2024, pp. 165–168. https://doi.org/10.24867/mma-2024-05-002.
Chicago
Terek, Vladimir, Lazar Kovačević, Branko Škorić, Aljaž Drnovšek, Miha Čekada, Zoran Bobić, Marko Zagoričnik, and Pál Terek. 2024. “TRIBOLOGICAL TESTING OF MULTILAYER TiAlSiN COATING AT HIGH TEMPERATURES.” International Scientific Conference MMA – Flexible Technologies (MMA): 165–168. https://doi.org/10.24867/mma-2024-05-002.
Harvard
Terek, V. et al. (2024) ‘TRIBOLOGICAL TESTING OF MULTILAYER TiAlSiN COATING AT HIGH TEMPERATURES’, International Scientific Conference MMA – Flexible Technologies (MMA), pp. 165–168. doi:10.24867/mma-2024-05-002.
IEEE
V. Terek et al., “TRIBOLOGICAL TESTING OF MULTILAYER TiAlSiN COATING AT HIGH TEMPERATURES,” International Scientific Conference MMA – Flexible Technologies (MMA), pp. 165–168, 2024, doi: 10.24867/mma-2024-05-002.
BibTeX
@inproceedings{terek2024tribological,
title = {{TRIBOLOGICAL TESTING OF MULTILAYER TiAlSiN COATING AT HIGH TEMPERATURES}},
author = {Terek, Vladimir and Kovačević, Lazar and Škorić, Branko and Drnovšek, Aljaž and Čekada, Miha and Bobić, Zoran and Zagoričnik, Marko and Terek, Pál},
booktitle = {International Scientific Conference MMA – Flexible Technologies (MMA)},
year = {2024},
pages = {165--168},
doi = {10.24867/mma-2024-05-002},
url = {https://doi.org/10.24867/mma-2024-05-002}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- TiAlSiN coating
- multilayer coatings
- high-temperature tribology
- friction coefficient
- wear rate
- abrasive wear
- adhesive wear
- magnetron sputtering
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Terek, V., Kovačević, L., Škorić, B., Drnovšek, A., Čekada, M., Bobić, Z., Zagoričnik, M., & Terek, P. (2024). TRIBOLOGICAL TESTING OF MULTILAYER TiAlSiN COATING AT HIGH TEMPERATURES. International Scientific Conference MMA – Flexible Technologies (MMA), 165–168. https://doi.org/10.24867/mma-2024-05-002
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at International Scientific Conference MMA – Flexible Technologies (MMA): sign in and open the PDF from this page.
Who wrote this paper?
Vladimir Terek, Lazar Kovačević, Branko Škorić, Aljaž Drnovšek, Miha Čekada, Zoran Bobić, Marko Zagoričnik, Pál Terek.
What is the DOI of this paper?
10.24867/mma-2024-05-002, permanently at https://doi.org/10.24867/mma-2024-05-002. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.