Journal article · 2014 · Open access
Tribological Properties of TiN Coating at Elevated Temperature up to 600°C
Applied Mechanics and Materials, 644-650, 4784–4787 · Published 1 September 2014 · DOI 10.4028/www.scientific.net/amm.644-650.4784
In brief
“Tribological Properties of TiN Coating at Elevated Temperature up to 600°C” is a 2014 journal article by Ai Hua Liu and Shu Xia Zhou, published in Applied Mechanics and Materials. OpenAlex counts 2 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Applied Mechanics and Materials.
- Citations
- 2
- Most cited in
- 2024 (1)
- References
- 11
- Authors
- 2
Abstract
The tribological properties of TiN coating were studied at the speed of 40m/min-120m/min, under the load of 5N-15N at elevated temperatures between 200°C-600°C. It can be concluded that when the temperature is lower than 400°C, the coefficient of friction increased with temperature, but the value decreased because of the friction oxidation at 600°C.The wear mass loss of the coating increased with increasing of speeds and loads, and this proved the TiN coating was not adaptable to high temperature environment. The wear mechanisms of TiN coating at elevated temperature were abrasive wear, plastic deformation, oxidation wear and adhesion wear.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Liu, A. H., & Zhou, S. X. (2014). Tribological Properties of TiN Coating at Elevated Temperature up to 600°C. Applied Mechanics and Materials, 644-650, 4784–4787. https://doi.org/10.4028/www.scientific.net/amm.644-650.4784
MLA 9
Liu, Ai Hua, and Shu Xia Zhou. “Tribological Properties of TiN Coating at Elevated Temperature up to 600°C.” Applied Mechanics and Materials, vol. 644-650, 2014, pp. 4784–4787. https://doi.org/10.4028/www.scientific.net/amm.644-650.4784.
Chicago
Liu, Ai Hua and Shu Xia Zhou. 2014. “Tribological Properties of TiN Coating at Elevated Temperature up to 600°C.” Applied Mechanics and Materials 644-650: 4784–4787. https://doi.org/10.4028/www.scientific.net/amm.644-650.4784.
Harvard
Liu, A. H. and Zhou, S. X. (2014) ‘Tribological Properties of TiN Coating at Elevated Temperature up to 600°C’, Applied Mechanics and Materials, 644-650, pp. 4784–4787. doi:10.4028/www.scientific.net/amm.644-650.4784.
IEEE
A. H. Liu and S. X. Zhou, “Tribological Properties of TiN Coating at Elevated Temperature up to 600°C,” Applied Mechanics and Materials, vol. 644-650, pp. 4784–4787, 2014, doi: 10.4028/www.scientific.net/amm.644-650.4784.
BibTeX
@article{liu2014tribological,
title = {{Tribological Properties of TiN Coating at Elevated Temperature up to 600°C}},
author = {Liu, Ai Hua and Zhou, Shu Xia},
journal = {Applied Mechanics and Materials},
year = {2014},
volume = {644-650},
pages = {4784--4787},
doi = {10.4028/www.scientific.net/amm.644-650.4784},
url = {https://doi.org/10.4028/www.scientific.net/amm.644-650.4784}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- TiN coating
- tribological properties
- high temperature
- friction coefficient
- wear mass loss
- wear mechanisms
- abrasive wear
- plastic deformation
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Liu, A. H., & Zhou, S. X. (2014). Tribological Properties of TiN Coating at Elevated Temperature up to 600°C. Applied Mechanics and Materials, 644-650, 4784–4787. https://doi.org/10.4028/www.scientific.net/amm.644-650.4784
How many times has this paper been cited?
2 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Applied Mechanics and Materials: sign in and open the full text from this page.
Who wrote this paper?
Ai Hua Liu, Shu Xia Zhou.
What is the DOI of this paper?
10.4028/www.scientific.net/amm.644-650.4784, permanently at https://doi.org/10.4028/www.scientific.net/amm.644-650.4784. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.