Journal article · 2018 · Open access
Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition
Coatings, 8(4), 134 · Published 6 April 2018 · DOI 10.3390/coatings8040134
In brief
“Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition” is a 2018 journal article by Ming Zhou Cao and 3 co-authors, published in Coatings. OpenAlex counts 27 citations as of 17 November 2026, which puts it in the top 9% of works published in 2018 by citations. It is open access under a CC BY licence: the full text is free to read at Coatings.
- Citations
- 27
- Most cited in
- 2021 (5)
- Field-weighted impact
- 1.75
- References
- 36
- Authors
- 4
Abstract
The increasing demands of environmental protection have led to solid lubricant coatings becoming more and more important. A new type of MoS2-based coating co-doped with Cu and Al prepared by magnetron sputtering, including Cu/MoS2 and Cu-Al/MoS2 coatings, for lubrication applications is reported. To this end, the coatings were annealed in an argon atmosphere furnace. The microstructure and the tribological properties of the coatings prior to and following annealing were analyzed using scanning electron microscopy, energy dispersive spectrometry, X-ray diffractometry (XRD) and with a multi-functional tester for material surface properties. The results demonstrated that the friction coefficient of the Cu/MoS2 coating was able to reach as low as 0.07, due to the synergistic lubrication effect of the soft metal Cu with MoS2. However, the wear resistance of the coating was not satisfied. Although the lowest friction coefficient of the Cu-Al/MoS2 coatings was 0.083, the wear resistance was enhanced, which was attributed to the improved the toughness of the coatings due to the introduction of aluminum. The XRD results revealed that the γ2-Cu9Al4 phase was formed in the specimen of Cu-Al/MoS2 coatings. The comprehensive performance of the Cu-Al/MoS2 coatings after annealing was improved in comparison to substrate heating, since the heat-treatment was beneficial for the strengthening of the solid solution of the coatings.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Cao, M. Z., Zhao, L., Wu, L., & Wang, W. (2018). Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition. Coatings, 8(4), 134. https://doi.org/10.3390/coatings8040134
MLA 9
Cao, Ming Zhou, et al. “Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition.” Coatings, vol. 8, no. 4, 2018, p. 134. https://doi.org/10.3390/coatings8040134.
Chicago
Cao, Ming Zhou, Lan Zhao, Libin Wu, and Wenquan Wang. 2018. “Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition.” Coatings 8 (4): 134. https://doi.org/10.3390/coatings8040134.
Harvard
Cao, M. Z. et al. (2018) ‘Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition’, Coatings, 8(4), p. 134. doi:10.3390/coatings8040134.
IEEE
M. Z. Cao, L. Zhao, L. Wu, and W. Wang, “Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition,” Coatings, vol. 8, no. 4, p. 134, 2018, doi: 10.3390/coatings8040134.
BibTeX
@article{cao2018tribological,
title = {{Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition}},
author = {Cao, Ming Zhou and Zhao, Lan and Wu, Libin and Wang, Wenquan},
journal = {Coatings},
year = {2018},
volume = {8},
number = {4},
pages = {134},
doi = {10.3390/coatings8040134},
url = {https://doi.org/10.3390/coatings8040134}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2018 | 2 | |
| 2019 | 2 | |
| 2020 | 3 | |
| 2021 | 5 | |
| 2022 | 2 | |
| 2023 | 4 | |
| 2024 | 3 | |
| 2025 | 5 | |
| 2026 | 1 |
Its field-weighted citation impact is 1.75: it has been cited 1.75 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- solid lubricant coatings
- MoS2
- copper
- aluminum
- friction coefficient
- wear resistance
- annealing
- magnetron sputtering
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Cao, M. Z., Zhao, L., Wu, L., & Wang, W. (2018). Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition. Coatings, 8(4), 134. https://doi.org/10.3390/coatings8040134
How many times has this paper been cited?
27 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Coatings: sign in and open the PDF from this page.
Who wrote this paper?
Ming Zhou Cao, Lan Zhao, Libin Wu, Wenquan Wang.
What is the DOI of this paper?
10.3390/coatings8040134, permanently at https://doi.org/10.3390/coatings8040134. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.