Journal article · 2024 · Open access

Tribological Properties of CrN/DLC and CrN Coatings under Different Testing Conditions

Shuling Zhang, Xiangdong Yang, Tenglong Huang, Feng Guo, Longjie Dai, Yi Liu, Bo Zhang

Coatings, 14(8), 1002 · Published 7 August 2024 · DOI 10.3390/coatings14081002

Open full textCite this paper

In brief

“Tribological Properties of CrN/DLC and CrN Coatings under Different Testing Conditions” is a 2024 journal article by Shuling Zhang and 6 co-authors, published in Coatings. OpenAlex counts 25 citations as of 17 November 2026, which puts it in the top 1% of works published in 2024 by citations. It is open access under a CC BY licence: the full text is free to read at Coatings.

Citations
25
Most cited in
2026 (15)
Field-weighted impact
2.98
References
35
Authors
7

Abstract

CrN and diamond-like carbon (DLC) coatings are deposited on the surface of 431 stainless steel by the direct current magnetron sputtering technique. The surface morphology, micro-structure, hardness, friction, and wear properties of CrN, CrN/DLC and multi-layer composite DLC coatings are investigated by scanning electron microscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, nanoindentation tester, scratch tester, and friction and wear tester. The results show that the surface of the single CrN coating is very rough for the columnar crystal structure with preferred orientation. When it serves as inner transition layers to form the composite DLC coatings, the surface gets much smoother, with reduced defects. The friction and wear results indicate that the composite DLC coatings exhibit lower coefficients of friction, and better wear and corrosion resistance in dry friction, deionized water, and seawater. In the dry wear and friction process, the single CrN coating is easily worn out, and severe friction oxidation and furrow wear both appear with a friction coefficient of 0.48. But the friction coefficient of a CrN coating in seawater is reduced to 0.16, and friction oxidation and wear loss are further reduced with water lubrication. The CrN/DLC coating has excellent tribological performance in three test concoctions and has the lowest friction coefficient of 0.08 in seawater, which is related to the higher sp3 bond content, density (1.907 g/cm3) and high degree of amorphization, contributing to high hardness and a self-lubrication effect. However, due to the limited thickness of CrN/DLC (1.14 µm), it easily peels off and fails during friction and wear in different testing conditions. In multi-layer composite DLC coatings, there are more sp2 bonds with decreased amorphization, high enough thickness (4.02 µm), and increased bonding strength for the formation of different carbides and nitrides of chromium as transition layers, which gives rise to the further decreased average friction coefficient and the lowest wear loss. Therefore, the CrN coating alone has good wear resistance, and, as with the inner transition layer with a DLC coating, it can effectively improve the overall thickness and the bonding strength of the multi-layer films by optimizing the chemical compounds of DLC coatings. These results provide experimental support and reference for the design and selection of surface coatings for 431 stainless steels in different working conditions.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Zhang, S., Yang, X., Huang, T., Guo, F., Dai, L., Liu, Y., & Zhang, B. (2024). Tribological Properties of CrN/DLC and CrN Coatings under Different Testing Conditions. Coatings, 14(8), 1002. https://doi.org/10.3390/coatings14081002

MLA 9

Zhang, Shuling, et al. “Tribological Properties of CrN/DLC and CrN Coatings under Different Testing Conditions.” Coatings, vol. 14, no. 8, 2024, p. 1002. https://doi.org/10.3390/coatings14081002.

Chicago

Zhang, Shuling, Xiangdong Yang, Tenglong Huang, Feng Guo, Longjie Dai, Yi Liu, and Bo Zhang. 2024. “Tribological Properties of CrN/DLC and CrN Coatings under Different Testing Conditions.” Coatings 14 (8): 1002. https://doi.org/10.3390/coatings14081002.

Harvard

Zhang, S. et al. (2024) ‘Tribological Properties of CrN/DLC and CrN Coatings under Different Testing Conditions’, Coatings, 14(8), p. 1002. doi:10.3390/coatings14081002.

IEEE

S. Zhang et al., “Tribological Properties of CrN/DLC and CrN Coatings under Different Testing Conditions,” Coatings, vol. 14, no. 8, p. 1002, 2024, doi: 10.3390/coatings14081002.

BibTeX

@article{zhang2024tribological,
  title     = {{Tribological Properties of CrN/DLC and CrN Coatings under Different Testing Conditions}},
  author    = {Zhang, Shuling and Yang, Xiangdong and Huang, Tenglong and Guo, Feng and Dai, Longjie and Liu, Yi and Zhang, Bo},
  journal   = {Coatings},
  year      = {2024},
  volume    = {14},
  number    = {8},
  pages     = {1002},
  doi       = {10.3390/coatings14081002},
  url       = {https://doi.org/10.3390/coatings14081002}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • CrN coatings
  • diamond-like carbon films
  • tribological properties
  • friction coefficient
  • wear resistance
  • corrosion resistance
  • sp3 bonding
  • amorphization

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Zhang, S., Yang, X., Huang, T., Guo, F., Dai, L., Liu, Y., & Zhang, B. (2024). Tribological Properties of CrN/DLC and CrN Coatings under Different Testing Conditions. Coatings, 14(8), 1002. https://doi.org/10.3390/coatings14081002

How many times has this paper been cited?

25 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Coatings: sign in and open the full text from this page.

Who wrote this paper?

Shuling Zhang, Xiangdong Yang, Tenglong Huang, Feng Guo, Longjie Dai, Yi Liu, Bo Zhang.

What is the DOI of this paper?

10.3390/coatings14081002, permanently at https://doi.org/10.3390/coatings14081002. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.