Paper · 1995 · Open access
Tribological performance of diamond and diamondlike carbon films at elevated temperatures
University of North Texas Digital Library (University of North Texas) · Published 1 September 1995
In brief
“Tribological performance of diamond and diamondlike carbon films at elevated temperatures” is a 1995 paper by Ali Erdemir and G.R. Fenske, published in University of North Texas Digital Library (University of North Texas). OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at University of North Texas Digital Library (University of North Texas).
- Citations
- 0
- References
- 21
- Authors
- 2
Abstract
In this study, we investigated the tribological performance of diamond and diamondlike carbon (DLC) films as a function of ambient temperature. Both films were deposited on silicon carbide (SiC) by microwave plasma chemical vapor deposition and ion-beam deposition processes. Tribological tests were performed on a reciprocating wear machine in open air (20 to 30% relative humidity) and under a 10-N load using SiC pins. For the test conditions explored, the steady- state friction coefficients of test pairs without a diamond or DLC film were 0.7 to 0.9 and the average wear rates of pins were 10{sup {minus}5} to 10{sup {minus}7} mm{sup 3}/N.m, depending on ambient temperature. DLC films reduced the steady-state friction coefficients of test pairs by factors of 3 to 5 and the wear rates of pins by two to three orders of magnitude. Low friction coefficients were also obtained with the diamond films, but wear rates of the counterface pins were high due to the very abrasive nature of these films. The wear of SiC disks coated with either diamond or DLC films was virtually unmeasurable while the wear of uncoated disks was substantial. Test results showed that the DLC films could afford low friction up to about 300{degrees}C. At higher temperatures, the DLC films became graphitized and were removed from the surface. The diamond films could withstand much higher temperatures, but their tribological behavior degraded. Raman spectroscopy and scanning electron microscopy were used to elucidate the friction and wear mechanisms of both films at high temperatures.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Erdemir, A., & Fenske, G. (1995). Tribological performance of diamond and diamondlike carbon films at elevated temperatures. University of North Texas Digital Library (University of North Texas). https://digital.library.unt.edu/ark:/67531/metadc669103/
MLA 9
Erdemir, Ali, and G.R. Fenske. “Tribological performance of diamond and diamondlike carbon films at elevated temperatures.” University of North Texas Digital Library (University of North Texas), 1995. https://digital.library.unt.edu/ark:/67531/metadc669103/.
Chicago
Erdemir, Ali and G.R. Fenske. 1995. “Tribological performance of diamond and diamondlike carbon films at elevated temperatures.” University of North Texas Digital Library (University of North Texas). https://digital.library.unt.edu/ark:/67531/metadc669103/.
Harvard
Erdemir, A. and Fenske, G. (1995) ‘Tribological performance of diamond and diamondlike carbon films at elevated temperatures’, University of North Texas Digital Library (University of North Texas). Available at: https://digital.library.unt.edu/ark:/67531/metadc669103/.
IEEE
A. Erdemir and G. Fenske, “Tribological performance of diamond and diamondlike carbon films at elevated temperatures,” University of North Texas Digital Library (University of North Texas), 1995.
BibTeX
@article{erdemir1995tribological,
title = {{Tribological performance of diamond and diamondlike carbon films at elevated temperatures}},
author = {Erdemir, Ali and Fenske, G.R.},
journal = {University of North Texas Digital Library (University of North Texas)},
year = {1995},
url = {https://digital.library.unt.edu/ark:/67531/metadc669103/}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- diamond films
- diamond-like carbon films
- tribology
- high temperature
- friction coefficient
- wear rate
- SiC substrate
- graphitization
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Erdemir, A., & Fenske, G. (1995). Tribological performance of diamond and diamondlike carbon films at elevated temperatures. University of North Texas Digital Library (University of North Texas). https://digital.library.unt.edu/ark:/67531/metadc669103/
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at University of North Texas Digital Library (University of North Texas): sign in and open the PDF from this page.
Who wrote this paper?
Ali Erdemir, G.R. Fenske.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.