Journal article · 2025 · Open access

Tribological improvement using Ti3C2Tx MXenes and/or CaCO3 nanoparticles as lubricant additives

José M. Liñeira del Río, Martín Gómez Martínez, Antonio Moreda‐Piñeiro, Enriqueta R. López, Josefa Fernández

Wear, 572-573, 206041 · Published 19 March 2025 · DOI 10.1016/j.wear.2025.206041

Open full textCite this paper

In brief

“Tribological improvement using Ti3C2Tx MXenes and/or CaCO3 nanoparticles as lubricant additives” is a 2025 journal article by José M. Liñeira del Río and 4 co-authors, published in Wear. OpenAlex counts 7 citations as of 17 November 2026, which puts it in the top 3% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Wear.

Citations
7
Most cited in
2026 (6)
Field-weighted impact
1.05
References
52
Authors
5

Abstract

The main goal of this work is the tribological characterization of low viscosity nanolubricants, PAO8 base oil containing Ti 3 C 2 T x MXenes and/or functionalized CaCO 3 (CaCO 3 -OA) nanoparticles as additives. Friction enhancements were reached with CaCO 3 -OA nanolubricants with maximum reductions of 44 % for the optimal concentration of 0.10 wt% CaCO 3 -OA. With respect to wear, significant improvements in antiwear performance were achieved with maximum reductions in wear width of 27 % (0.15 wt% CaCO 3 -OA), 14 % (0.10 wt% Ti 3 C 2 T x ) and 13 % for hybrid (0.10 wt% CaCO 3 -OA/Ti 3 C 2 T x ) nanolubricants. Confocal Raman microscopy was utilized to recognize the mechanisms that govern tribological improvement: tribofilm formation for Ti 3 C 2 T x nanosheets and tribofilm formation and self-repairing for CaCO 3 -OA nanoparticles. • Ti 3 C 2 T x and CaCO 3 -OA NPs were synthesized and fully characterized. • 0.10 wt% CaCO 3 -OA was the optimal friction performance (44 % reduction). • 0.15 wt% CaCO 3 -OA was the optimal antiwear behavior (27 % width reduction). • Lubrication mechanisms can be explained by tribofilm formation and self-repairing.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

del Río, J. M. L., Martínez, M. G., Moreda‐Piñeiro, A., López, E. R., & Fernández, J. (2025). Tribological improvement using Ti3C2Tx MXenes and/or CaCO3 nanoparticles as lubricant additives. Wear, 572-573, 206041. https://doi.org/10.1016/j.wear.2025.206041

MLA 9

del Río, José M. Liñeira, et al. “Tribological improvement using Ti3C2Tx MXenes and/or CaCO3 nanoparticles as lubricant additives.” Wear, vol. 572-573, 2025, p. 206041. https://doi.org/10.1016/j.wear.2025.206041.

Chicago

del Río, José M. Liñeira, Martín Gómez Martínez, Antonio Moreda‐Piñeiro, Enriqueta R. López, and Josefa Fernández. 2025. “Tribological improvement using Ti3C2Tx MXenes and/or CaCO3 nanoparticles as lubricant additives.” Wear 572-573: 206041. https://doi.org/10.1016/j.wear.2025.206041.

Harvard

del Río, J. M. L. et al. (2025) ‘Tribological improvement using Ti3C2Tx MXenes and/or CaCO3 nanoparticles as lubricant additives’, Wear, 572-573, p. 206041. doi:10.1016/j.wear.2025.206041.

IEEE

J. M. L. del Río, M. G. Martínez, A. Moreda‐Piñeiro, E. R. López, and J. Fernández, “Tribological improvement using Ti3C2Tx MXenes and/or CaCO3 nanoparticles as lubricant additives,” Wear, vol. 572-573, p. 206041, 2025, doi: 10.1016/j.wear.2025.206041.

BibTeX

@article{delrio2025tribological,
  title     = {{Tribological improvement using Ti3C2Tx MXenes and/or CaCO3 nanoparticles as lubricant additives}},
  author    = {del Río, José M. Liñeira and Martínez, Martín Gómez and Moreda‐Piñeiro, Antonio and López, Enriqueta R. and Fernández, Josefa},
  journal   = {Wear},
  year      = {2025},
  volume    = {572-573},
  pages     = {206041},
  doi       = {10.1016/j.wear.2025.206041},
  url       = {https://doi.org/10.1016/j.wear.2025.206041}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives

  • Ti3C2Tx MXene
  • calcium carbonate nanoparticles
  • lubricant additives
  • nanolubricants
  • friction reduction
  • anti-wear properties
  • tribofilm formation
  • hybrid nanolubricants

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

del Río, J. M. L., Martínez, M. G., Moreda‐Piñeiro, A., López, E. R., & Fernández, J. (2025). Tribological improvement using Ti3C2Tx MXenes and/or CaCO3 nanoparticles as lubricant additives. Wear, 572-573, 206041. https://doi.org/10.1016/j.wear.2025.206041

How many times has this paper been cited?

7 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Wear: sign in and open the full text from this page.

Who wrote this paper?

José M. Liñeira del Río, Martín Gómez Martínez, Antonio Moreda‐Piñeiro, Enriqueta R. López, Josefa Fernández.

What is the DOI of this paper?

10.1016/j.wear.2025.206041, permanently at https://doi.org/10.1016/j.wear.2025.206041. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.