Journal article · 2025 · Open access
Tribological characterization of AlTiN, TiN, and TiAlN coatings
Advances in Science and Technology – Research Journal, 19(12), 67–80 · Published 25 October 2025 · DOI 10.12913/22998624/210033
In brief
“Tribological characterization of AlTiN, TiN, and TiAlN coatings” is a 2025 journal article by Joanna Kowalczyk and Monika Madej, published in Advances in Science and Technology – Research Journal. OpenAlex counts 1 citations as of 17 November 2026, which puts it in the top 9% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Advances in Science and Technology – Research Journal.
- Citations
- 1
- Most cited in
- 2026 (1)
- Field-weighted impact
- 0.26
- References
- 18
- Authors
- 2
Abstract
This article presents a comparative analysis of titanium, nitrogen, and aluminum-based coatings, specifically TiN, AlTiN, and TiAlN, in the context of their tribological behavior and application in machining.Tribological friction and wear tests were performed using a ball-on-disc tribometer in rotary motion under dry friction.The specimens consisted of uncoated HS6-5-2C steel discs, HS6-5-2C steel discs coated with AlTiN, TiN, and TiAlN, and 100Cr6 steel balls as counter-samples.The wear of the discs and balls was evaluated via microscopic investigations, which included the analysis of surface geometry, microstructure, and chemical composition within the wear tracks.The differences in morphology and chemical composition revealed by microscopic analysis had a significant influence on the tribological behavior of the coatings.The addition of aluminum to titanium nitride coatings improved the tribological characteristics by reducing linear wear in the case of the AlTiN coating and providing low-friction properties for the TiAlN coating.Furthermore, compared to the other tested coatings, the TiAlN coating exhibited fewer built-up edges and a less developed surface after friction testing.The obtained results indicate that the appropriate selection of coatings is crucial for the efficiency of cutting tools in dry machining.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kowalczyk, J., & Madej, M. (2025). Tribological characterization of AlTiN, TiN, and TiAlN coatings. Advances in Science and Technology – Research Journal, 19(12), 67–80. https://doi.org/10.12913/22998624/210033
MLA 9
Kowalczyk, Joanna, and Monika Madej. “Tribological characterization of AlTiN, TiN, and TiAlN coatings.” Advances in Science and Technology – Research Journal, vol. 19, no. 12, 2025, pp. 67–80. https://doi.org/10.12913/22998624/210033.
Chicago
Kowalczyk, Joanna and Monika Madej. 2025. “Tribological characterization of AlTiN, TiN, and TiAlN coatings.” Advances in Science and Technology – Research Journal 19 (12): 67–80. https://doi.org/10.12913/22998624/210033.
Harvard
Kowalczyk, J. and Madej, M. (2025) ‘Tribological characterization of AlTiN, TiN, and TiAlN coatings’, Advances in Science and Technology – Research Journal, 19(12), pp. 67–80. doi:10.12913/22998624/210033.
IEEE
J. Kowalczyk and M. Madej, “Tribological characterization of AlTiN, TiN, and TiAlN coatings,” Advances in Science and Technology – Research Journal, vol. 19, no. 12, pp. 67–80, 2025, doi: 10.12913/22998624/210033.
BibTeX
@article{kowalczyk2025tribological,
title = {{Tribological characterization of AlTiN, TiN, and TiAlN coatings}},
author = {Kowalczyk, Joanna and Madej, Monika},
journal = {Advances in Science and Technology – Research Journal},
year = {2025},
volume = {19},
number = {12},
pages = {67--80},
doi = {10.12913/22998624/210033},
url = {https://doi.org/10.12913/22998624/210033}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- TiAlN coating
- TiN coating
- titanium nitride
- tribological properties
- dry machining
- cutting tools
- friction
- wear
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Kowalczyk, J., & Madej, M. (2025). Tribological characterization of AlTiN, TiN, and TiAlN coatings. Advances in Science and Technology – Research Journal, 19(12), 67–80. https://doi.org/10.12913/22998624/210033
How many times has this paper been cited?
1 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advances in Science and Technology – Research Journal: sign in and open the PDF from this page.
Who wrote this paper?
Joanna Kowalczyk, Monika Madej.
What is the DOI of this paper?
10.12913/22998624/210033, permanently at https://doi.org/10.12913/22998624/210033. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.