Journal article · 2022 · Open access

Tribological characteristic of atmospheric plasma sprayed NiAl coatings with addition of nanostructured MoO3/Bi2O3 binary oxides as high temperature lubricant

Hang Sun, Junhong Jia, Borui Zhang, Jie Yang, Hua Xin, Wei Chen, Nairu He, Hong‐Chun Li

Journal of Materials Research and Technology, 17, 1662–1671 · Published 31 January 2022 · DOI 10.1016/j.jmrt.2022.01.131

Open PDFView at the publisherCite this paper

In brief

“Tribological characteristic of atmospheric plasma sprayed NiAl coatings with addition of nanostructured MoO3/Bi2O3 binary oxides as high temperature lubricant” is a 2022 journal article by Hang Sun and 7 co-authors, published in Journal of Materials Research and Technology. OpenAlex counts 33 citations as of 17 November 2026, which puts it in the top 4% of works published in 2022 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Journal of Materials Research and Technology.

Citations
33
Most cited in
2026 (11)
Field-weighted impact
1.78
References
35
Authors
8

Abstract

The MoO3–Bi2O3 binary oxides with higher ion potential difference, lower interaction parameters and lower melting points were selected as the high temperature lubricants for NiAl-based coating to further improve the tribological properties in wide temperature range. The friction and wear performance at low and medium temperatures (400–600 °C) is significantly improved compared to previous works. The NiAl-nanostructured MoO3/Bi2O3 composite coatings were fabricated via atmospheric plasma spraying (APS). The impact of the ratio of the MoO3/Bi2O3 binary oxides on the mechanical and tribological properties at high temperatures was investigated. The results show that the friction coefficients and wear rates of composite coating with a MoO3:Bi2O3 ratio of 1:1 were significantly reduced from room temperature to 800 °C compare with our previous work, where, the friction coefficient and wear rate were reduced to lower than 0.22 and 2.8 × 10−5 mm3·(N·m)-1 at 400–800 °C. The decrease of friction coefficient at room temperature is due to the lower melting points of MoO3 and Bi2O3 than that of other oxides. While above 400 °C, the improved friction and wear performance was attributed to the formation of new easy-to-shear ternary oxides as NiMoO4, Bi2Mo3O12 and Bi2MoO6 on the worn surfaces through tribo–chemical reactions, which works synergistically to reduce the friction coefficients and wear rate.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Sun, H., Jia, J., Zhang, B., Yang, J., Xin, H., Chen, W., He, N., & Li, H. (2022). Tribological characteristic of atmospheric plasma sprayed NiAl coatings with addition of nanostructured MoO3/Bi2O3 binary oxides as high temperature lubricant. Journal of Materials Research and Technology, 17, 1662–1671. https://doi.org/10.1016/j.jmrt.2022.01.131

MLA 9

Sun, Hang, et al. “Tribological characteristic of atmospheric plasma sprayed NiAl coatings with addition of nanostructured MoO3/Bi2O3 binary oxides as high temperature lubricant.” Journal of Materials Research and Technology, vol. 17, 2022, pp. 1662–1671. https://doi.org/10.1016/j.jmrt.2022.01.131.

Chicago

Sun, Hang, Junhong Jia, Borui Zhang, Jie Yang, Hua Xin, Wei Chen, Nairu He, and Hong‐Chun Li. 2022. “Tribological characteristic of atmospheric plasma sprayed NiAl coatings with addition of nanostructured MoO3/Bi2O3 binary oxides as high temperature lubricant.” Journal of Materials Research and Technology 17: 1662–1671. https://doi.org/10.1016/j.jmrt.2022.01.131.

Harvard

Sun, H. et al. (2022) ‘Tribological characteristic of atmospheric plasma sprayed NiAl coatings with addition of nanostructured MoO3/Bi2O3 binary oxides as high temperature lubricant’, Journal of Materials Research and Technology, 17, pp. 1662–1671. doi:10.1016/j.jmrt.2022.01.131.

IEEE

H. Sun et al., “Tribological characteristic of atmospheric plasma sprayed NiAl coatings with addition of nanostructured MoO3/Bi2O3 binary oxides as high temperature lubricant,” Journal of Materials Research and Technology, vol. 17, pp. 1662–1671, 2022, doi: 10.1016/j.jmrt.2022.01.131.

BibTeX

@article{sun2022tribological,
  title     = {{Tribological characteristic of atmospheric plasma sprayed NiAl coatings with addition of nanostructured MoO3/Bi2O3 binary oxides as high temperature lubricant}},
  author    = {Sun, Hang and Jia, Junhong and Zhang, Borui and Yang, Jie and Xin, Hua and Chen, Wei and He, Nairu and Li, Hong‐Chun},
  journal   = {Journal of Materials Research and Technology},
  year      = {2022},
  volume    = {17},
  pages     = {1662--1671},
  doi       = {10.1016/j.jmrt.2022.01.131},
  url       = {https://doi.org/10.1016/j.jmrt.2022.01.131}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202244
202344
202444
20251010
20261111

Its field-weighted citation impact is 1.78: it has been cited 1.78 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors

  • NiAl coatings
  • atmospheric plasma spraying
  • high-temperature lubrication
  • tribological properties
  • friction coefficient
  • wear rate
  • ternary oxides
  • tribochemical reaction

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Sun, H., Jia, J., Zhang, B., Yang, J., Xin, H., Chen, W., He, N., & Li, H. (2022). Tribological characteristic of atmospheric plasma sprayed NiAl coatings with addition of nanostructured MoO3/Bi2O3 binary oxides as high temperature lubricant. Journal of Materials Research and Technology, 17, 1662–1671. https://doi.org/10.1016/j.jmrt.2022.01.131

How many times has this paper been cited?

33 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Materials Research and Technology: sign in and open the PDF from this page.

Who wrote this paper?

Hang Sun, Junhong Jia, Borui Zhang, Jie Yang, Hua Xin, Wei Chen, Nairu He, Hong‐Chun Li.

What is the DOI of this paper?

10.1016/j.jmrt.2022.01.131, permanently at https://doi.org/10.1016/j.jmrt.2022.01.131. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.