Journal article · 2010 · Open access
Tribological characterisation of magnetron sputtered Ti(C, O, N) thin films
International Journal of Materials and Product Technology, 39(1/2), 186 · Published 1 January 2010 · DOI 10.1504/ijmpt.2010.034270
In brief
“Tribological characterisation of magnetron sputtered Ti(C, O, N) thin films” is a 2010 journal article by C. Olteanu and 6 co-authors, published in International Journal of Materials and Product Technology. OpenAlex counts 8 citations as of 17 November 2026, which puts it in the top 7% of works published in 2010 by citations. It is open access: the full text is free to read at Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT).
- Citations
- 8
- Most cited in
- 2023 (3)
- Field-weighted impact
- 0.41
- References
- 2
- Authors
- 7
Abstract
Ti(C, O, N) thin films were prepared by magnetron sputtering and analysed in terms of their tribological properties. Surface and tribological parameters were analysed and discussed as a function of the films composition and structural features, as well as their thickness. The evolution of friction coefficient values was in concordance with the wear behaviour of the films. According to the atomic composition of the films, an increasing of the carbon percentage and a compound chemical formula closed to the stoichiometric TiC lead to a very good wear behaviour. This aspect is also directly correlated with the friction behaviour.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Olteanu, C., Munteanu, D., Ionescu, C., Munteanu, A., Chappé, J., Cunha, L., & Vaz, F. (2010). Tribological characterisation of magnetron sputtered Ti(C, O, N) thin films. International Journal of Materials and Product Technology, 39(1/2), 186. https://doi.org/10.1504/ijmpt.2010.034270
MLA 9
Olteanu, C., et al. “Tribological characterisation of magnetron sputtered Ti(C, O, N) thin films.” International Journal of Materials and Product Technology, vol. 39, no. 1/2, 2010, p. 186. https://doi.org/10.1504/ijmpt.2010.034270.
Chicago
Olteanu, C., Daniel Munteanu, Cristina Ionescu, Adrian Munteanu, J.M. Chappé, L. Cunha, and Filipe Vaz. 2010. “Tribological characterisation of magnetron sputtered Ti(C, O, N) thin films.” International Journal of Materials and Product Technology 39 (1/2): 186. https://doi.org/10.1504/ijmpt.2010.034270.
Harvard
Olteanu, C. et al. (2010) ‘Tribological characterisation of magnetron sputtered Ti(C, O, N) thin films’, International Journal of Materials and Product Technology, 39(1/2), p. 186. doi:10.1504/ijmpt.2010.034270.
IEEE
C. Olteanu et al., “Tribological characterisation of magnetron sputtered Ti(C, O, N) thin films,” International Journal of Materials and Product Technology, vol. 39, no. 1/2, p. 186, 2010, doi: 10.1504/ijmpt.2010.034270.
BibTeX
@article{olteanu2010tribological,
title = {{Tribological characterisation of magnetron sputtered Ti(C, O, N) thin films}},
author = {Olteanu, C. and Munteanu, Daniel and Ionescu, Cristina and Munteanu, Adrian and Chappé, J.M. and Cunha, L. and Vaz, Filipe},
journal = {International Journal of Materials and Product Technology},
year = {2010},
volume = {39},
number = {1/2},
pages = {186},
doi = {10.1504/ijmpt.2010.034270},
url = {https://doi.org/10.1504/ijmpt.2010.034270}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2015 | 2 | |
| 2022 | 2 | |
| 2023 | 3 |
Its field-weighted citation impact is 0.41: it has been cited 0.41 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- titanium carbide nitride
- tribological properties
- friction coefficient
- wear behavior
- magnetron sputtering
- film composition
- carbon content
- stoichiometry
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Olteanu, C., Munteanu, D., Ionescu, C., Munteanu, A., Chappé, J., Cunha, L., & Vaz, F. (2010). Tribological characterisation of magnetron sputtered Ti(C, O, N) thin films. International Journal of Materials and Product Technology, 39(1/2), 186. https://doi.org/10.1504/ijmpt.2010.034270
How many times has this paper been cited?
8 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT): sign in and open the full text from this page.
Who wrote this paper?
C. Olteanu, Daniel Munteanu, Cristina Ionescu, Adrian Munteanu, J.M. Chappé, L. Cunha, Filipe Vaz.
What is the DOI of this paper?
10.1504/ijmpt.2010.034270, permanently at https://doi.org/10.1504/ijmpt.2010.034270. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.