Conference paper · 2015 · Open access
Tribological Characteries of DLC film in Sliding Contacts under Differ-ent Lubrication Conditions
International Conference on Advanced Design and Manufacturing Engineering (ICADME) · Published 1 January 2015 · DOI 10.2991/icadme-15.2015.134
In brief
“Tribological Characteries of DLC film in Sliding Contacts under Differ-ent Lubrication Conditions” is a 2015 conference paper by Y. Bai and P. Cao, published in International Conference on Advanced Design and Manufacturing Engineering (ICADME). OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at International Conference on Advanced Design and Manufacturing Engineering (ICADME).
- Citations
- 0
- References
- 16
- Authors
- 2
Abstract
Diamond-like carbon (DLC) films are well known for their high hardness, low friction and excellent wear resistance.Therefore, DLC film coating can contribute to improving mechanical and tribological properties of materials.The objective of this study is to investigate the effect of solid and liquid lubrication on friction and wear performance of selected solid lubricating coatings, comparative experiments have been carried out on chemical vapor deposited hydrogenated diamond-like carbon (DLC) films against Si3N4 ball, using a ball-on-disk tribo-tester under the conditions of room temperature and different lubrication conditions.Surface morphology of coatings were investigated by atom force microscope (AFM), friction coefficient (COF) and wear rate of solid films be analyzed also.It was shown that the friction be greatly reduced when the solid film lubricated with oil and grease simultaneously compared to lubricated singly at the start-up or under boundary lubrication conditions.The effect of lubrication oil to the wear resistance property of MoS2 DLC was better than lubrication grease.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Bai, Y., & Cao, P. (2015). Tribological Characteries of DLC film in Sliding Contacts under Differ-ent Lubrication Conditions. International Conference on Advanced Design and Manufacturing Engineering (ICADME). https://doi.org/10.2991/icadme-15.2015.134
MLA 9
Bai, Y., and P. Cao. “Tribological Characteries of DLC film in Sliding Contacts under Differ-ent Lubrication Conditions.” International Conference on Advanced Design and Manufacturing Engineering (ICADME), 2015. https://doi.org/10.2991/icadme-15.2015.134.
Chicago
Bai, Y. and P. Cao. 2015. “Tribological Characteries of DLC film in Sliding Contacts under Differ-ent Lubrication Conditions.” International Conference on Advanced Design and Manufacturing Engineering (ICADME). https://doi.org/10.2991/icadme-15.2015.134.
Harvard
Bai, Y. and Cao, P. (2015) ‘Tribological Characteries of DLC film in Sliding Contacts under Differ-ent Lubrication Conditions’, International Conference on Advanced Design and Manufacturing Engineering (ICADME). doi:10.2991/icadme-15.2015.134.
IEEE
Y. Bai and P. Cao, “Tribological Characteries of DLC film in Sliding Contacts under Differ-ent Lubrication Conditions,” International Conference on Advanced Design and Manufacturing Engineering (ICADME), 2015, doi: 10.2991/icadme-15.2015.134.
BibTeX
@inproceedings{bai2015tribological,
title = {{Tribological Characteries of DLC film in Sliding Contacts under Differ-ent Lubrication Conditions}},
author = {Bai, Y. and Cao, P.},
booktitle = {International Conference on Advanced Design and Manufacturing Engineering (ICADME)},
year = {2015},
doi = {10.2991/icadme-15.2015.134},
url = {https://doi.org/10.2991/icadme-15.2015.134}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- diamond-like carbon films
- hydrogenated DLC
- solid lubrication
- liquid lubrication
- sliding contact
- friction coefficient
- wear rate
- MoS2
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Bai, Y., & Cao, P. (2015). Tribological Characteries of DLC film in Sliding Contacts under Differ-ent Lubrication Conditions. International Conference on Advanced Design and Manufacturing Engineering (ICADME). https://doi.org/10.2991/icadme-15.2015.134
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at International Conference on Advanced Design and Manufacturing Engineering (ICADME): sign in and open the PDF from this page.
Who wrote this paper?
Y. Bai, P. Cao.
What is the DOI of this paper?
10.2991/icadme-15.2015.134, permanently at https://doi.org/10.2991/icadme-15.2015.134. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.