Journal article · 2006 · Open access
Tribological Behavior of Microarc Oxidation Coatings on Aluminum Alloy
ISIJ International, 46(2), 287–291 · Published 1 January 2006 · DOI 10.2355/isijinternational.46.287
In brief
“Tribological Behavior of Microarc Oxidation Coatings on Aluminum Alloy” is a 2006 journal article by Wenbin Xue and 3 co-authors, published in ISIJ International. OpenAlex counts 24 citations as of 17 November 2026. It is open access: the full text is free to read at ISIJ International.
- Citations
- 24
- Most cited in
- 2012 (2)
- Field-weighted impact
- 7.58
- References
- 15
- Authors
- 4
Abstract
Thick ceramic coatings were fabricated by microarc oxidation on 2024 aluminum alloy in a silicate solution. The phase composition and microhardness in the coatings were determined. The unlubricated tribological performance of the coatings was investigated using a SRV ball-on-disc friction and wear test system with reciprocating motion against sintered WC ball. The typical worn surfaces of the Al substrate and the ceramic coatings were observed by a scanning electron microscope. Under the same wear condition, the wear rates in different depth coatings are nearly similar. However, in a same depth of the coatings, wear rate gradually decreases with wear duration, and the lowest wear rate is less than 3.29×10−7 mm3/N m. During friction process, a WC transfer layer was formed on the tribo-contact area of the coatings, which takes advantage of decreasing the wear rate. The friction coefficient in a steady friction stage is about 0.52. After the Al alloy is treated by microarc oxidation, its wear resistance is improved over three orders of magnitude. The high wear resistance of the microarc oxidation coatings results from a nearly perfect distribution of α-Al2O3 and γ-Al2O3 phases in the coating.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Xue, W., Du, J., Wu, X., & Lai, Y. (2006). Tribological Behavior of Microarc Oxidation Coatings on Aluminum Alloy. ISIJ International, 46(2), 287–291. https://doi.org/10.2355/isijinternational.46.287
MLA 9
Xue, Wenbin, et al. “Tribological Behavior of Microarc Oxidation Coatings on Aluminum Alloy.” ISIJ International, vol. 46, no. 2, 2006, pp. 287–291. https://doi.org/10.2355/isijinternational.46.287.
Chicago
Xue, Wenbin, Jiancheng Du, Xiaoling Wu, and Yongchun Lai. 2006. “Tribological Behavior of Microarc Oxidation Coatings on Aluminum Alloy.” ISIJ International 46 (2): 287–291. https://doi.org/10.2355/isijinternational.46.287.
Harvard
Xue, W. et al. (2006) ‘Tribological Behavior of Microarc Oxidation Coatings on Aluminum Alloy’, ISIJ International, 46(2), pp. 287–291. doi:10.2355/isijinternational.46.287.
IEEE
W. Xue, J. Du, X. Wu, and Y. Lai, “Tribological Behavior of Microarc Oxidation Coatings on Aluminum Alloy,” ISIJ International, vol. 46, no. 2, pp. 287–291, 2006, doi: 10.2355/isijinternational.46.287.
BibTeX
@article{xue2006tribological,
title = {{Tribological Behavior of Microarc Oxidation Coatings on Aluminum Alloy}},
author = {Xue, Wenbin and Du, Jiancheng and Wu, Xiaoling and Lai, Yongchun},
journal = {ISIJ International},
year = {2006},
volume = {46},
number = {2},
pages = {287--291},
doi = {10.2355/isijinternational.46.287},
url = {https://doi.org/10.2355/isijinternational.46.287}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2012 | 2 | |
| 2013 | 1 | |
| 2017 | 1 | |
| 2019 | 2 | |
| 2021 | 1 | |
| 2022 | 2 | |
| 2023 | 2 | |
| 2024 | 1 | |
| 2025 | 1 |
Its field-weighted citation impact is 7.58: it has been cited 7.58 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- plasma electrolytic oxidation
- ceramic coatings
- 2024 aluminum alloy
- tribological properties
- wear resistance
- friction coefficient
- silicate electrolyte
- microhardness
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Xue, W., Du, J., Wu, X., & Lai, Y. (2006). Tribological Behavior of Microarc Oxidation Coatings on Aluminum Alloy. ISIJ International, 46(2), 287–291. https://doi.org/10.2355/isijinternational.46.287
How many times has this paper been cited?
24 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at ISIJ International: sign in and open the PDF from this page.
Who wrote this paper?
Wenbin Xue, Jiancheng Du, Xiaoling Wu, Yongchun Lai.
What is the DOI of this paper?
10.2355/isijinternational.46.287, permanently at https://doi.org/10.2355/isijinternational.46.287. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.