Paper · 2007 · Open access
Tribological Behavior of DLC Films by RF-PECVD at the Elevated Temperature
Key engineering materials, 353-358, 1781–1784 · Published 10 September 2007 · DOI 10.4028/www.scientific.net/kem.353-358.1781
In brief
“Tribological Behavior of DLC Films by RF-PECVD at the Elevated Temperature” is a 2007 paper by Yong Kyung Cho and 3 co-authors, published in Key engineering materials. OpenAlex counts 2 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Key engineering materials.
- Citations
- 2
- Most cited in
- 2021 (1)
- References
- 5
- Authors
- 4
Abstract
The tribological behaviors of Diamond-like carbon (DLC) films, prepared by the radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) method, were studied in the room temperature and the elevated temperature. The ball-on-disk tests with DLC films on steel specimens were conducted at a sliding speed of 60 rpm, a load of 10 N, and surrounding temperatures of 25°C and 75°C. The results show that the coefficients of friction and the amounts of wear of DLC films were decreased at higher temperature. After tests the wear tracks of hydrogenated DLC film were analyzed by Raman spectroscopy.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Cho, Y. K., Shin, Y. H., Jeong, S. H., & Lee, Y. Z. (2007). Tribological Behavior of DLC Films by RF-PECVD at the Elevated Temperature. Key engineering materials, 353-358, 1781–1784. https://doi.org/10.4028/www.scientific.net/kem.353-358.1781
MLA 9
Cho, Yong Kyung, et al. “Tribological Behavior of DLC Films by RF-PECVD at the Elevated Temperature.” Key engineering materials, vol. 353-358, 2007, pp. 1781–1784. https://doi.org/10.4028/www.scientific.net/kem.353-358.1781.
Chicago
Cho, Yong Kyung, Yun Ha Shin, Sung Hoon Jeong, and Young Ze Lee. 2007. “Tribological Behavior of DLC Films by RF-PECVD at the Elevated Temperature.” Key engineering materials 353-358: 1781–1784. https://doi.org/10.4028/www.scientific.net/kem.353-358.1781.
Harvard
Cho, Y. K. et al. (2007) ‘Tribological Behavior of DLC Films by RF-PECVD at the Elevated Temperature’, Key engineering materials, 353-358, pp. 1781–1784. doi:10.4028/www.scientific.net/kem.353-358.1781.
IEEE
Y. K. Cho, Y. H. Shin, S. H. Jeong, and Y. Z. Lee, “Tribological Behavior of DLC Films by RF-PECVD at the Elevated Temperature,” Key engineering materials, vol. 353-358, pp. 1781–1784, 2007, doi: 10.4028/www.scientific.net/kem.353-358.1781.
BibTeX
@article{cho2007tribological,
title = {{Tribological Behavior of DLC Films by RF-PECVD at the Elevated Temperature}},
author = {Cho, Yong Kyung and Shin, Yun Ha and Jeong, Sung Hoon and Lee, Young Ze},
journal = {Key engineering materials},
year = {2007},
volume = {353-358},
pages = {1781--1784},
doi = {10.4028/www.scientific.net/kem.353-358.1781},
url = {https://doi.org/10.4028/www.scientific.net/kem.353-358.1781}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- diamond-like carbon films
- tribological properties
- high temperature
- RF-PECVD
- hydrogenated DLC
- friction coefficient
- wear
- ball-on-disc test
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Cho, Y. K., Shin, Y. H., Jeong, S. H., & Lee, Y. Z. (2007). Tribological Behavior of DLC Films by RF-PECVD at the Elevated Temperature. Key engineering materials, 353-358, 1781–1784. https://doi.org/10.4028/www.scientific.net/kem.353-358.1781
How many times has this paper been cited?
2 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Key engineering materials: sign in and open the full text from this page.
Who wrote this paper?
Yong Kyung Cho, Yun Ha Shin, Sung Hoon Jeong, Young Ze Lee.
What is the DOI of this paper?
10.4028/www.scientific.net/kem.353-358.1781, permanently at https://doi.org/10.4028/www.scientific.net/kem.353-358.1781. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.