Journal article · 2023 · Open access
Tribological Behavior and Self-Healing Properties of Ni3Al Matrix Self-Lubricating Composites Containing Sn-Ag-Cu and Ti3SiC2 from 20 to 800 °C
Coatings, 13(4), 711 · Published 31 March 2023 · DOI 10.3390/coatings13040711
In brief
“Tribological Behavior and Self-Healing Properties of Ni3Al Matrix Self-Lubricating Composites Containing Sn-Ag-Cu and Ti3SiC2 from 20 to 800 °C” is a 2023 journal article by Yuchun Huang and 3 co-authors, published in Coatings. OpenAlex counts 17 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Coatings.
- Citations
- 17
- Most cited in
- 2026 (10)
- Field-weighted impact
- 1.69
- References
- 37
- Authors
- 4
Abstract
As a high-temperature structural material, Ni3Al matrix composites are often used to manufacture basic mechanical components that need to be used in high-temperature conditions. To meet the increasing demand for metal matrix composites with an excellent tribological performance over a wide temperature range, Ni3Al matrix self-lubricating composites containing Sn-Ag-Cu and Ti3SiC2 (NST) were synthesized via laser-melting deposition. Dry sliding friction tests of NST against Si3N4 ball were undertaken from 20 to 800 °C to investigate the tribological behavior and wear-triggered self-healing properties. The results show that the tribological behaviors of NST are strongly dependent on the testing temperature and self-healing properties. At low and moderate temperatures from 20 to 400 °C, as the Sn-Ag-Cu flows into the cracks and is oxidized during sliding friction, while the cracks on the worn surface are filled with oxides consisting mainly of Al2O3, SnO2 and CuO. At higher temperatures of 600 and 800 °C, the cracks are filled by the principal oxides of Al2O3, TiO2 and SiO2 due to the partial decomposition and oxidation of Ti3SiC2. Compared with other testing temperatures, the recovery ratio relative to the Ni3Al base alloy of the cracks on the worn surface of NST is the highest at 400 °C, which is about 76.4%. The synergistic action mechanisms of Sn-Ag-Cu and Ti3SiC2 on the crack self-healing from 20 to 800 °C play a significant role in forming a stable solid lubricating film, improving the anti-friction and wear resistance of NST. The results provide a solution allowing for metal matrix composites to achieve excellent lubrication stability over a wide temperature range by virtue of the crack self-healing properties.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Huang, Y., Ma, H., Meng, Y., & Liu, X. (2023). Tribological Behavior and Self-Healing Properties of Ni3Al Matrix Self-Lubricating Composites Containing Sn-Ag-Cu and Ti3SiC2 from 20 to 800 °C. Coatings, 13(4), 711. https://doi.org/10.3390/coatings13040711
MLA 9
Huang, Yuchun, et al. “Tribological Behavior and Self-Healing Properties of Ni3Al Matrix Self-Lubricating Composites Containing Sn-Ag-Cu and Ti3SiC2 from 20 to 800 °C.” Coatings, vol. 13, no. 4, 2023, p. 711. https://doi.org/10.3390/coatings13040711.
Chicago
Huang, Yuchun, Haishu Ma, Yubo Meng, and Xiyao Liu. 2023. “Tribological Behavior and Self-Healing Properties of Ni3Al Matrix Self-Lubricating Composites Containing Sn-Ag-Cu and Ti3SiC2 from 20 to 800 °C.” Coatings 13 (4): 711. https://doi.org/10.3390/coatings13040711.
Harvard
Huang, Y. et al. (2023) ‘Tribological Behavior and Self-Healing Properties of Ni3Al Matrix Self-Lubricating Composites Containing Sn-Ag-Cu and Ti3SiC2 from 20 to 800 °C’, Coatings, 13(4), p. 711. doi:10.3390/coatings13040711.
IEEE
Y. Huang, H. Ma, Y. Meng, and X. Liu, “Tribological Behavior and Self-Healing Properties of Ni3Al Matrix Self-Lubricating Composites Containing Sn-Ag-Cu and Ti3SiC2 from 20 to 800 °C,” Coatings, vol. 13, no. 4, p. 711, 2023, doi: 10.3390/coatings13040711.
BibTeX
@article{huang2023tribological,
title = {{Tribological Behavior and Self-Healing Properties of Ni3Al Matrix Self-Lubricating Composites Containing Sn-Ag-Cu and Ti3SiC2 from 20 to 800 °C}},
author = {Huang, Yuchun and Ma, Haishu and Meng, Yubo and Liu, Xiyao},
journal = {Coatings},
year = {2023},
volume = {13},
number = {4},
pages = {711},
doi = {10.3390/coatings13040711},
url = {https://doi.org/10.3390/coatings13040711}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 1 | |
| 2025 | 6 | |
| 2026 | 10 |
Its field-weighted citation impact is 1.69: it has been cited 1.69 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Tribology and Wear Analysis
- self-lubricating composites
- Ti3SiC2
- self-healing
- dry sliding friction
- high-temperature tribology
- crack self-healing
- solid lubricating films
- wear resistance
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Huang, Y., Ma, H., Meng, Y., & Liu, X. (2023). Tribological Behavior and Self-Healing Properties of Ni3Al Matrix Self-Lubricating Composites Containing Sn-Ag-Cu and Ti3SiC2 from 20 to 800 °C. Coatings, 13(4), 711. https://doi.org/10.3390/coatings13040711
How many times has this paper been cited?
17 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Coatings: sign in and open the PDF from this page.
Who wrote this paper?
Yuchun Huang, Haishu Ma, Yubo Meng, Xiyao Liu.
What is the DOI of this paper?
10.3390/coatings13040711, permanently at https://doi.org/10.3390/coatings13040711. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.