Journal article · 2017 · Open access
Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy
Coatings, 7(11), 187 · Published 4 November 2017 · DOI 10.3390/coatings7110187
In brief
“Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy” is a 2017 journal article by Jose Mario DePaiva and 11 co-authors, published in Coatings. OpenAlex counts 37 citations as of 17 November 2026, which puts it in the top 7% of works published in 2017 by citations. It is open access under a CC BY licence: the full text is free to read at Coatings.
- Citations
- 37
- Most cited in
- 2021 (9)
- Field-weighted impact
- 2.43
- References
- 26
- Authors
- 12
Abstract
Tribological phenomena and tool wear mechanisms during machining of hard-to-cut TiAl6V4 aerospace alloy have been investigated in detail. Since cutting tool wear is directly affected by tribological phenomena occurring between the surfaces of the workpiece and the cutting tool, the performance of the cutting tool is strongly associated with the conditions of the machining process. The present work shows the effect of different machining conditions on the tribological and wear performance of TiB2-coated cutting tools compared to uncoated carbide tools. FEM modeling of the temperature profile on the friction surface was performed for wet machining conditions under varying cutting parameters. Comprehensive characterization of the TiB2 coated vs. uncoated cutting tool wear performance was made using optical 3D imaging, SEM/EDX and XPS methods respectively. The results obtained were linked to the FEM modeling. The studies carried out show that during machining of the TiAl6V4 alloy, the efficiency of the TiB2 coating application for carbide cutting tools strongly depends on cutting conditions. The TiB2 coating is very efficient under roughing at low speeds (with strong buildup edge formation). In contrast, it shows similar wear performance to the uncoated tool under finishing operations at higher cutting speeds when cratering wear predominates.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
DePaiva, J. M., Shalaby, M., Chowdhury, M. S. I., Шустер, Л. Ш., Чертовских, С. В., Covelli, D., Locks, E., Stolf, P., Elfizy, A., Bork, C. A. S., Fox‐Rabinovich, G., & Veldhuis, S. C. (2017). Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy. Coatings, 7(11), 187. https://doi.org/10.3390/coatings7110187
MLA 9
DePaiva, Jose Mario, et al. “Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy.” Coatings, vol. 7, no. 11, 2017, p. 187. https://doi.org/10.3390/coatings7110187.
Chicago
DePaiva, Jose Mario, M.A. Shalaby, Mohammad Shariful Islam Chowdhury, Л. Ш. Шустер, С. В. Чертовских, Danielle Covelli, Edinei Locks, et al. 2017. “Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy.” Coatings 7 (11): 187. https://doi.org/10.3390/coatings7110187.
Harvard
DePaiva, J. M. et al. (2017) ‘Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy’, Coatings, 7(11), p. 187. doi:10.3390/coatings7110187.
IEEE
J. M. DePaiva et al., “Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy,” Coatings, vol. 7, no. 11, p. 187, 2017, doi: 10.3390/coatings7110187.
BibTeX
@article{depaiva2017tribological,
title = {{Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy}},
author = {DePaiva, Jose Mario and Shalaby, M.A. and Chowdhury, Mohammad Shariful Islam and Шустер, Л. Ш. and Чертовских, С. В. and Covelli, Danielle and Locks, Edinei and Stolf, Pietro and Elfizy, Amr and Bork, Carlos Alberto Schuch and Fox‐Rabinovich, German and Veldhuis, Stephen Clarence},
journal = {Coatings},
year = {2017},
volume = {7},
number = {11},
pages = {187},
doi = {10.3390/coatings7110187},
url = {https://doi.org/10.3390/coatings7110187}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2018 | 4 | |
| 2019 | 4 | |
| 2020 | 4 | |
| 2021 | 9 | |
| 2023 | 2 | |
| 2024 | 4 | |
| 2025 | 4 | |
| 2026 | 6 |
Its field-weighted citation impact is 2.43: it has been cited 2.43 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- TiB2 coatings
- PVD coatings
- carbide tools
- titanium aluminide
- tool wear mechanisms
- tribology
- cutting parameters
- cutting speed
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
DePaiva, J. M., Shalaby, M., Chowdhury, M. S. I., Шустер, Л. Ш., Чертовских, С. В., Covelli, D., Locks, E., Stolf, P., Elfizy, A., Bork, C. A. S., Fox‐Rabinovich, G., & Veldhuis, S. C. (2017). Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy. Coatings, 7(11), 187. https://doi.org/10.3390/coatings7110187
How many times has this paper been cited?
37 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Coatings: sign in and open the PDF from this page.
Who wrote this paper?
Jose Mario DePaiva, M.A. Shalaby, Mohammad Shariful Islam Chowdhury, Л. Ш. Шустер, С. В. Чертовских, Danielle Covelli, Edinei Locks, Pietro Stolf, Amr Elfizy, Carlos Alberto Schuch Bork, German Fox‐Rabinovich, Stephen Clarence Veldhuis.
What is the DOI of this paper?
10.3390/coatings7110187, permanently at https://doi.org/10.3390/coatings7110187. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.