Journal article · 2018 · Open access

Triboelectric Nanogenerator Based on Biocompatible and Easily Available Polymer Films

S. R. Srither, Doddamane S. Shankar Rao, S. Krishna Prasad

ChemistrySelect, 3(18), 5055–5061 · Published 9 May 2018 · DOI 10.1002/slct.201800685

Open PDFView at the publisherCite this paper

In brief

“Triboelectric Nanogenerator Based on Biocompatible and Easily Available Polymer Films” is a 2018 journal article by S. R. Srither and 2 co-authors, published in ChemistrySelect. OpenAlex counts 19 citations as of 18 November 2026. It is open access: the full text is free to read at ChemistrySelect.

Citations
19
Most cited in
2021 (6)
Field-weighted impact
1.07
References
40
Authors
3

Abstract

We have fabricated robust triboelectric nanogenerators (TENGs) employing different polymer films which are biocompatible and easily available. The combination of polyurethane and PTFE layers is seen to provide the highest TENG parameters with an open circuit peak‐to‐peak output voltage of ∼33.5 V and a current value of 27.4 μA with a gentle tapping force of 0.33 N. The topography of the film surface has been characterized using atomic force microscopy in conjunction with image analysis. We find a very good, albeit non‐linear, correlation between the TENG electrical output and the surface roughness. Our studies do not support any relation between the permittivity of the medium and the TENG output. Employing cellulose acetate and Kapton as the triboelectric layers, we have constructed a simple force sensor, whose output is seen to be highly linear over a large range of force varying from 0.24 to 5.2 N, and a significantly high output of 1.5 V/N.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Srither, S. R., Rao, D. S. S., & Prasad, S. K. (2018). Triboelectric Nanogenerator Based on Biocompatible and Easily Available Polymer Films. ChemistrySelect, 3(18), 5055–5061. https://doi.org/10.1002/slct.201800685

MLA 9

Srither, S. R., et al. “Triboelectric Nanogenerator Based on Biocompatible and Easily Available Polymer Films.” ChemistrySelect, vol. 3, no. 18, 2018, pp. 5055–5061. https://doi.org/10.1002/slct.201800685.

Chicago

Srither, S. R., Doddamane S. Shankar Rao, and S. Krishna Prasad. 2018. “Triboelectric Nanogenerator Based on Biocompatible and Easily Available Polymer Films.” ChemistrySelect 3 (18): 5055–5061. https://doi.org/10.1002/slct.201800685.

Harvard

Srither, S. R., Rao, D. S. S. and Prasad, S. K. (2018) ‘Triboelectric Nanogenerator Based on Biocompatible and Easily Available Polymer Films’, ChemistrySelect, 3(18), pp. 5055–5061. doi:10.1002/slct.201800685.

IEEE

S. R. Srither, D. S. S. Rao, and S. K. Prasad, “Triboelectric Nanogenerator Based on Biocompatible and Easily Available Polymer Films,” ChemistrySelect, vol. 3, no. 18, pp. 5055–5061, 2018, doi: 10.1002/slct.201800685.

BibTeX

@article{srither2018triboelectric,
  title     = {{Triboelectric Nanogenerator Based on Biocompatible and Easily Available Polymer Films}},
  author    = {Srither, S. R. and Rao, Doddamane S. Shankar and Prasad, S. Krishna},
  journal   = {ChemistrySelect},
  year      = {2018},
  volume    = {3},
  number    = {18},
  pages     = {5055--5061},
  doi       = {10.1002/slct.201800685},
  url       = {https://doi.org/10.1002/slct.201800685}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201911
202055
202166
202222
202311
202411
202511
202622

Its field-weighted citation impact is 1.07: it has been cited 1.07 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials

  • triboelectric nanogenerator
  • polyurethane
  • polytetrafluoroethylene
  • cellulose acetate
  • Kapton
  • surface roughness
  • force sensor
  • energy harvesting

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Srither, S. R., Rao, D. S. S., & Prasad, S. K. (2018). Triboelectric Nanogenerator Based on Biocompatible and Easily Available Polymer Films. ChemistrySelect, 3(18), 5055–5061. https://doi.org/10.1002/slct.201800685

How many times has this paper been cited?

19 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at ChemistrySelect: sign in and open the PDF from this page.

Who wrote this paper?

S. R. Srither, Doddamane S. Shankar Rao, S. Krishna Prasad.

What is the DOI of this paper?

10.1002/slct.201800685, permanently at https://doi.org/10.1002/slct.201800685. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.