Journal article · 2021 · Open access

Toughening and polymerization stress control in composites using thiourethane-treated fillers

Ana Paula Piovezan Fugolin, Ana Rosa Costa, Lourenço Correr‐Sobrinho, Ro Crystal Chaw, Steven H. Lewis, Jack L. Ferracane, Carmem S. Pfeifer

Scientific Reports, 11(1), 7638 · Published 7 April 2021 · DOI 10.1038/s41598-021-87151-9

Open PDFView at the publisherCite this paper

In brief

“Toughening and polymerization stress control in composites using thiourethane-treated fillers” is a 2021 journal article by Ana Paula Piovezan Fugolin and 6 co-authors, published in Scientific Reports. OpenAlex counts 28 citations as of 20 November 2026, which puts it in the top 8% of works published in 2021 by citations. It is open access under a CC BY licence: the full text is free to read at Scientific Reports.

Citations
28
Most cited in
2024 (9)
Field-weighted impact
3.68
References
48
Authors
7

Abstract

Filler particle functionalization with thiourethane oligomers has been shown to increase fracture toughness and decrease polymerization stress in dental composites, though the mechanism is poorly understood. The aim of this study was to systematically characterize the effect of the type of filler surface functionalization on the physicochemical properties of experimental resin composites containing fillers of different size and volume fraction. Barium glass fillers (1, 3 and 10 µm) were functionalized with 2 wt% thiourethane-silane (TU-Sil) synthesized de novo and characterized by thermogravimetric analysis. Fillers treated with 3-(Trimethoxysilyl)propyl methacrylate (MA-Sil) and with no surface treatment (No-Sil) served as controls. Fillers (50, 60 and 70 wt%) were incorporated into BisGMA-UDMA-TEGDMA (5:3:2) containing camphorquinone/ethyl-4-dimethylaminobenzoate (0.2/0.8 wt%) and 0.2 wt% di-tert-butyl hydroxytoluene. The functionalized particles were characterized by thermogravimetric analysis and a representative group was tagged with methacrylated rhodamine B and analyzed by confocal laser scanning microscopy. Polymerization kinetics were assessed by near-IR spectroscopy. Polymerization stress was tested in a cantilever system, and fracture toughness was assessed with single edge-notched beams. Fracture surfaces were characterized by SEM. Data were analyzed with ANOVA/Tukey's test (α = 0.05). The grafting of thiourethane oligomer onto the surface of the filler particles led to reductions in polymerization stress ranging between 41 and 54%, without affecting the viscosity of the composite. Fracture toughness increased on average by 35% for composites with the experimental fillers compared with the traditional methacrylate-silanized groups. SEM and confocal analyses demonstrate that the coverage of the filler surface was not homogeneous and varied with the size of the filler. The average silane layer for the 1 µm particle functionalized with the thiourethane was 206 nm, much thicker than reported for traditional silanes. In summary, this study systematically characterized the silane layer and established structure-property relationships for methacrylate and thiourethane silane-containing materials. The results demonstrate that significant stress reductions and fracture toughness increases are obtained by judiciously tailoring the organic-inorganic interface in dental composites.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Fugolin, A. P. P., Costa, A. R., Correr‐Sobrinho, L., Chaw, R. C., Lewis, S. H., Ferracane, J. L., & Pfeifer, C. S. (2021). Toughening and polymerization stress control in composites using thiourethane-treated fillers. Scientific Reports, 11(1), 7638. https://doi.org/10.1038/s41598-021-87151-9

MLA 9

Fugolin, Ana Paula Piovezan, et al. “Toughening and polymerization stress control in composites using thiourethane-treated fillers.” Scientific Reports, vol. 11, no. 1, 2021, p. 7638. https://doi.org/10.1038/s41598-021-87151-9.

Chicago

Fugolin, Ana Paula Piovezan, Ana Rosa Costa, Lourenço Correr‐Sobrinho, Ro Crystal Chaw, Steven H. Lewis, Jack L. Ferracane, and Carmem S. Pfeifer. 2021. “Toughening and polymerization stress control in composites using thiourethane-treated fillers.” Scientific Reports 11 (1): 7638. https://doi.org/10.1038/s41598-021-87151-9.

Harvard

Fugolin, A. P. P. et al. (2021) ‘Toughening and polymerization stress control in composites using thiourethane-treated fillers’, Scientific Reports, 11(1), p. 7638. doi:10.1038/s41598-021-87151-9.

IEEE

A. P. P. Fugolin et al., “Toughening and polymerization stress control in composites using thiourethane-treated fillers,” Scientific Reports, vol. 11, no. 1, p. 7638, 2021, doi: 10.1038/s41598-021-87151-9.

BibTeX

@article{fugolin2021toughening,
  title     = {{Toughening and polymerization stress control in composites using thiourethane-treated fillers}},
  author    = {Fugolin, Ana Paula Piovezan and Costa, Ana Rosa and Correr‐Sobrinho, Lourenço and Chaw, Ro Crystal and Lewis, Steven H. and Ferracane, Jack L. and Pfeifer, Carmem S.},
  journal   = {Scientific Reports},
  year      = {2021},
  volume    = {11},
  number    = {1},
  pages     = {7638},
  doi       = {10.1038/s41598-021-87151-9},
  url       = {https://doi.org/10.1038/s41598-021-87151-9}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202122
202233
202333
202499
202566
202655

Its field-weighted citation impact is 3.68: it has been cited 3.68 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Health Sciences › Dentistry › General Dentistry › Dental materials and restorations

  • composite resin
  • polymerization shrinkage stress
  • fracture toughness
  • organic-inorganic interfaces
  • filler particle size
  • filler volume fraction

Work with this paper

Most-cited papers in Dentistry

All highly cited Dentistry papers

Questions about this paper

How do I cite this paper in APA style?

Fugolin, A. P. P., Costa, A. R., Correr‐Sobrinho, L., Chaw, R. C., Lewis, S. H., Ferracane, J. L., & Pfeifer, C. S. (2021). Toughening and polymerization stress control in composites using thiourethane-treated fillers. Scientific Reports, 11(1), 7638. https://doi.org/10.1038/s41598-021-87151-9

How many times has this paper been cited?

28 times, according to OpenAlex on 20 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Scientific Reports: sign in and open the PDF from this page.

Who wrote this paper?

Ana Paula Piovezan Fugolin, Ana Rosa Costa, Lourenço Correr‐Sobrinho, Ro Crystal Chaw, Steven H. Lewis, Jack L. Ferracane, Carmem S. Pfeifer.

What is the DOI of this paper?

10.1038/s41598-021-87151-9, permanently at https://doi.org/10.1038/s41598-021-87151-9. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 20 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.