Conference paper · 1998 · Open access
Topology optimization for flextensional actuators
AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO) · Published 22 August 1998 · DOI 10.2514/6.1998-4951
In brief
“Topology optimization for flextensional actuators” is a 1998 conference paper by Shinji Nishiwaki and 3 co-authors, published in AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO). OpenAlex counts 5 citations as of 22 November 2026. It is open access: the full text is free to read at Deep Blue (University of Michigan).
- Citations
- 5
- Field-weighted impact
- 3.93
- References
- 6
- Authors
- 4
Abstract
Flextensional actuators consist of a piezoceramic device and a flexible mechanical structure which converts and amplifies the output piezoceramic displacement.In this research, a methodology to design flextensional actuators with high output displacement and large generative forces is proposed based upon topology optimization techniques and finite element method (FEM).The problem is posed as the design of a flexible mechanical structure coupled with piezoceramic which has the maximum displacement in some specified directions due to an input of electrical charge in piezoceramic.Low frequency and static applications are considered.The optimal solution meets both kinematic requirement and structural requirement.The numerical implementations were done by using Sequential Linear Programming(SLP).Some 2-D topologies of flextensional actuator are presented for different applications.Based on this idea, in this research we proposed a design method for flextensional actuator by applying topology optimization techniques and finite element method.The problem is posed as the design of a flexible structure coupled to the piezoceramic that maximizes the output displacement and generative force in some specified direction.Since only the static and low frequency applications of these actuators will be considered, we do not take account dynamic effects in this work.The homogenization design method which was first developed by Bends 0 e and Kikuchi 3 is utilized as a topology optimization method.FEM is applied to the structural analysis in the optimization procedure.Even though two-dimensional (plane strain) topologies of flextensional actuators are presented as illustration, the method can be extended to three-dimensional cases.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Nishiwaki, S., Silva, D., Li, Y., & Kikuchi, N. (1998). Topology optimization for flextensional actuators. AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO). https://doi.org/10.2514/6.1998-4951
MLA 9
Nishiwaki, Shinji, et al. “Topology optimization for flextensional actuators.” AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO), 1998. https://doi.org/10.2514/6.1998-4951.
Chicago
Nishiwaki, Shinji, Da Silva, Y. Li, and Noboru Kikuchi. 1998. “Topology optimization for flextensional actuators.” AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO). https://doi.org/10.2514/6.1998-4951.
Harvard
Nishiwaki, S. et al. (1998) ‘Topology optimization for flextensional actuators’, AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO). doi:10.2514/6.1998-4951.
IEEE
S. Nishiwaki, D. Silva, Y. Li, and N. Kikuchi, “Topology optimization for flextensional actuators,” AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO), 1998, doi: 10.2514/6.1998-4951.
BibTeX
@inproceedings{nishiwaki1998topology,
title = {{Topology optimization for flextensional actuators}},
author = {Nishiwaki, Shinji and Silva, Da and Li, Y. and Kikuchi, Noboru},
booktitle = {AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO)},
year = {1998},
doi = {10.2514/6.1998-4951},
url = {https://doi.org/10.2514/6.1998-4951}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
- flextensional actuators
- topology optimization
- piezoelectric ceramics
- sequential linear programming
- actuator design
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Nishiwaki, S., Silva, D., Li, Y., & Kikuchi, N. (1998). Topology optimization for flextensional actuators. AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO). https://doi.org/10.2514/6.1998-4951
How many times has this paper been cited?
5 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Deep Blue (University of Michigan): sign in and open the full text from this page.
Who wrote this paper?
Shinji Nishiwaki, Da Silva, Y. Li, Noboru Kikuchi.
What is the DOI of this paper?
10.2514/6.1998-4951, permanently at https://doi.org/10.2514/6.1998-4951. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.