Paper · 2026 · Open access

Tool wear and surface roughness analysis in hard turning of AISI 4340 steel with coated carbide inserts

M. Zulfiqar, A.S. Jamali, S. Mohammad Hussain

Materials Physics and Mechanics · Published 6 April 2026 · DOI 10.18149/mpm.5412026_10

Open full textCite this paper

In brief

“Tool wear and surface roughness analysis in hard turning of AISI 4340 steel with coated carbide inserts” is a 2026 paper by M. Zulfiqar and 2 co-authors, published in Materials Physics and Mechanics. OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at Materials Physics and Mechanics.

Citations
0
Authors
3

Abstract

The performance of CVD-coated carbide inserts (TiCN/Al2O3) in hard turning AISI 4340 steel at cutting speeds of 60, 95, 180, and 250 m/min, under both dry and wet conditions are investigated. The goals were to evaluate tool wear, surface roughness, and wear mechanisms over different machining conditions. Surface roughness Ra value was noticed, and it dropped to Ra = 0.30 μm at 180 m/min but increased at 250 m/min due to vibration, edge instability, and wear. Flank wear rose with cutting speed: 186 μm at 60 m/min, 265 μm at 180 m/min, 542 μm at 250 m/min (dry), and 692 μm (wet), exceeding ISO tool life (VB = 300 μm) due to edge breakage, flaking, and adhesion. The examination of the tool surface by SEM and EDS revealed abrasion and slight coating delamination at low speeds, adhesion and oxidation at intermediate speeds, and catastrophic tool failure at high speeds.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Zulfiqar, M., Jamali, A., & Hussain, S. M. (2026). Tool wear and surface roughness analysis in hard turning of AISI 4340 steel with coated carbide inserts. Materials Physics and Mechanics. https://doi.org/10.18149/mpm.5412026_10

MLA 9

Zulfiqar, M., et al. “Tool wear and surface roughness analysis in hard turning of AISI 4340 steel with coated carbide inserts.” Materials Physics and Mechanics, 2026. https://doi.org/10.18149/mpm.5412026_10.

Chicago

Zulfiqar, M., A.S. Jamali, and S. Mohammad Hussain. 2026. “Tool wear and surface roughness analysis in hard turning of AISI 4340 steel with coated carbide inserts.” Materials Physics and Mechanics. https://doi.org/10.18149/mpm.5412026_10.

Harvard

Zulfiqar, M., Jamali, A. and Hussain, S. M. (2026) ‘Tool wear and surface roughness analysis in hard turning of AISI 4340 steel with coated carbide inserts’, Materials Physics and Mechanics. doi:10.18149/mpm.5412026_10.

IEEE

M. Zulfiqar, A. Jamali, and S. M. Hussain, “Tool wear and surface roughness analysis in hard turning of AISI 4340 steel with coated carbide inserts,” Materials Physics and Mechanics, 2026, doi: 10.18149/mpm.5412026_10.

BibTeX

@article{zulfiqar2026tool,
  title     = {{Tool wear and surface roughness analysis in hard turning of AISI 4340 steel with coated carbide inserts}},
  author    = {Zulfiqar, M. and Jamali, A.S. and Hussain, S. Mohammad},
  journal   = {Materials Physics and Mechanics},
  year      = {2026},
  doi       = {10.18149/mpm.5412026_10},
  url       = {https://doi.org/10.18149/mpm.5412026_10}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • hard turning
  • AISI 4340 steel
  • coated carbide inserts
  • tool wear
  • surface roughness
  • flank wear
  • cutting speed
  • dry machining

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Zulfiqar, M., Jamali, A., & Hussain, S. M. (2026). Tool wear and surface roughness analysis in hard turning of AISI 4340 steel with coated carbide inserts. Materials Physics and Mechanics. https://doi.org/10.18149/mpm.5412026_10

How many times has this paper been cited?

0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials Physics and Mechanics: sign in and open the full text from this page.

Who wrote this paper?

M. Zulfiqar, A.S. Jamali, S. Mohammad Hussain.

What is the DOI of this paper?

10.18149/mpm.5412026_10, permanently at https://doi.org/10.18149/mpm.5412026_10. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.