Journal article · 2023 · Open access

Thickness-Dependent Layer Stacking Disorder in Low and High Temperature Phase of MoTe2 via STEM Imaging

Lopa Bhatt, James L. Hart, Elisabeth Bianco, Judy J. Cha, Lena Fitting Kourkoutis

Microscopy and Microanalysis, 29(Supplement_1), 1735–1736 · Published 22 July 2023 · DOI 10.1093/micmic/ozad067.897

Open PDFView at the publisherCite this paper

In brief

“Thickness-Dependent Layer Stacking Disorder in Low and High Temperature Phase of MoTe2 via STEM Imaging” is a 2023 journal article by Lopa Bhatt and 4 co-authors, published in Microscopy and Microanalysis. OpenAlex counts 0 citations as of 18 November 2026. It is open access: the full text is free to read at Microscopy and Microanalysis.

Citations
0
References
6
Authors
5

Abstract

Properties of layered two-dimensional (2D) materials such as the band gap and ferroelectricity can be controlled by engineering their layer stacking for promising applications in quantum transport devices, energy materials and optical components [1,2]. For instance, small shifts in the layer-stacking order alone transform MoTe2, a 2D transition metal dichalcogenide (TMD), from the higher order topological insulator 1T' phase to the Weyl semimetal Td phase [3]. This phase transition from the monoclinic 1T' to the orthorhombic Td structure occurs upon cooling bulk 1T' below ∼250 K. [3]. Due to the weak out of plane van der Waals bonding, MoTe2 is very susceptible to stacking disorder which can drastically alter and suppress the phase transition [4]. Hence, precise characterization of these layer stacking disorders is critical to understanding the phase transition. In principle, the evolution of the layer stacking order in MoTe2 through the 1T’-Td transition can be directly probed in real space at atomic resolution with cross-sectional cryogenic scanning transmission electron microscope (STEM) imaging [5]. In-plane confinement imposed by the cross-sectional TEM lamella geometry, however, suppresses the phase transition likely due to modifications of the surface of the TEM lamella during the focused ion beam (FIB) process. Here, we overcome this limitation by a combination of cryogenic plan-view STEM imaging and room-temperature cross-sectional STEM imaging to study layer stacking and disorder. Insight from these two complementary techniques allow us to measure the structure of MoTe2 at atomic resolution on both side of the phase transition, finding significant layer stacking disorder and characterizing its dependence on thickness in MoTe2. Flakes of MoTe2 were exfoliated over holes on a silicon nitride TEM grid for plan-view (ab-plane) imaging with a Gatan 636 double-tilt cryogenic sample holder. Plan-view samples were imaged at room temperature (∼300 K) and liquid nitrogen temperature (∼100 K) revealing strikingly different atomic arrangements on either side of the 1T’-Td transition (Fig. 1a, b). Additionally, in different areas of the flake, several different configurations were measured at each temperature, indicating an inhomogeneous structure consistent with layer stacking disorder along the projection direction. Multislice image simulations [6] of the 1T’ and Td phases (Fig. 1c) do not match any of the experimental images further indicating presence of disorder. To explain these structural variations seen in the plan-view images, cross-sectional study of MoTe2 was performed. Cross-sectional lamellae of MoTe2 were prepared by FIB lift out. The lamellas were imaged in the ac-plane of MoTe2 flakes (Fig. 2b-d). As discussed previously, the 1T' and Td phases are differentiated by their layer stacking order, which…

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Bhatt, L., Hart, J. L., Bianco, E., Cha, J. J., & Kourkoutis, L. F. (2023). Thickness-Dependent Layer Stacking Disorder in Low and High Temperature Phase of MoTe2 via STEM Imaging. Microscopy and Microanalysis, 29(Supplement_1), 1735–1736. https://doi.org/10.1093/micmic/ozad067.897

MLA 9

Bhatt, Lopa, et al. “Thickness-Dependent Layer Stacking Disorder in Low and High Temperature Phase of MoTe2 via STEM Imaging.” Microscopy and Microanalysis, vol. 29, no. Supplement_1, 2023, pp. 1735–1736. https://doi.org/10.1093/micmic/ozad067.897.

Chicago

Bhatt, Lopa, James L. Hart, Elisabeth Bianco, Judy J. Cha, and Lena Fitting Kourkoutis. 2023. “Thickness-Dependent Layer Stacking Disorder in Low and High Temperature Phase of MoTe2 via STEM Imaging.” Microscopy and Microanalysis 29 (Supplement_1): 1735–1736. https://doi.org/10.1093/micmic/ozad067.897.

Harvard

Bhatt, L. et al. (2023) ‘Thickness-Dependent Layer Stacking Disorder in Low and High Temperature Phase of MoTe2 via STEM Imaging’, Microscopy and Microanalysis, 29(Supplement_1), pp. 1735–1736. doi:10.1093/micmic/ozad067.897.

IEEE

L. Bhatt, J. L. Hart, E. Bianco, J. J. Cha, and L. F. Kourkoutis, “Thickness-Dependent Layer Stacking Disorder in Low and High Temperature Phase of MoTe2 via STEM Imaging,” Microscopy and Microanalysis, vol. 29, no. Supplement_1, pp. 1735–1736, 2023, doi: 10.1093/micmic/ozad067.897.

BibTeX

@article{bhatt2023thickness,
  title     = {{Thickness-Dependent Layer Stacking Disorder in Low and High Temperature Phase of MoTe2 via STEM Imaging}},
  author    = {Bhatt, Lopa and Hart, James L. and Bianco, Elisabeth and Cha, Judy J. and Kourkoutis, Lena Fitting},
  journal   = {Microscopy and Microanalysis},
  year      = {2023},
  volume    = {29},
  number    = {Supplement_1},
  pages     = {1735--1736},
  doi       = {10.1093/micmic/ozad067.897},
  url       = {https://doi.org/10.1093/micmic/ozad067.897}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications

  • MoTe2
  • transition metal dichalcogenides
  • two-dimensional materials
  • thickness dependence
  • atomic resolution imaging
  • multislice simulation
  • van der Waals bonding
  • Weyl semimetals

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Bhatt, L., Hart, J. L., Bianco, E., Cha, J. J., & Kourkoutis, L. F. (2023). Thickness-Dependent Layer Stacking Disorder in Low and High Temperature Phase of MoTe2 via STEM Imaging. Microscopy and Microanalysis, 29(Supplement_1), 1735–1736. https://doi.org/10.1093/micmic/ozad067.897

How many times has this paper been cited?

0 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Microscopy and Microanalysis: sign in and open the PDF from this page.

Who wrote this paper?

Lopa Bhatt, James L. Hart, Elisabeth Bianco, Judy J. Cha, Lena Fitting Kourkoutis.

What is the DOI of this paper?

10.1093/micmic/ozad067.897, permanently at https://doi.org/10.1093/micmic/ozad067.897. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.