Journal article · 2025 · Open access
Thermomechanical Parameters Modelling of Spring Force Elements Made of Shape Memory Alloys
Materials, 18(13), 3055 · Published 27 June 2025 · DOI 10.3390/ma18133055
In brief
“Thermomechanical Parameters Modelling of Spring Force Elements Made of Shape Memory Alloys” is a 2025 journal article by Olga Łastowska and 2 co-authors, published in Materials. OpenAlex counts 2 citations as of 22 November 2026, which puts it in the top 6% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Materials.
- Citations
- 2
- Most cited in
- 2026 (2)
- Field-weighted impact
- 0.31
- References
- 18
- Authors
- 3
Abstract
This study presents a phenomenological model for predicting the thermomechanical behaviour of spring-type actuators made of shape memory alloys (SMAs). The model incorporates the kinetics of martensite-austenite phase transitions as a function of temperature and applied stress. The primary innovation is the inclusion of a scalar internal variable that represents the evolution of the phase transformation within a phenomenological macroscopic model. This approach enables the deformation-force-temperature behaviour of SMA-based spring elements under cyclic loading to be accurately described. A set of constitutive equations was derived to describe reversible and residual strains, along with transformation start and finish conditions. Model parameters were calibrated using experimental data from VSP-1 and TN-1K SMA springs that were subjected to thermal cycling. The validation results show a high correlation between the theoretical predictions and the experimental data, with deviation margins of less than 6.5%. The model was then applied to designing and analysing thermosensitive actuator mechanisms for temperature control systems. This yielded accurate deformation-force characteristics, demonstrating low inertia and high repeatability. This approach enables the efficient prediction and improvement of the performance of SMA-based spring elements in actuators, making it relevant for adaptive systems in marine and aerospace applications.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Łastowska, O., Polishchuk, V., & Poznanskyi, A. S. (2025). Thermomechanical Parameters Modelling of Spring Force Elements Made of Shape Memory Alloys. Materials, 18(13), 3055. https://doi.org/10.3390/ma18133055
MLA 9
Łastowska, Olga, et al. “Thermomechanical Parameters Modelling of Spring Force Elements Made of Shape Memory Alloys.” Materials, vol. 18, no. 13, 2025, p. 3055. https://doi.org/10.3390/ma18133055.
Chicago
Łastowska, Olga, Vitaliy Polishchuk, and Andrii S. Poznanskyi. 2025. “Thermomechanical Parameters Modelling of Spring Force Elements Made of Shape Memory Alloys.” Materials 18 (13): 3055. https://doi.org/10.3390/ma18133055.
Harvard
Łastowska, O., Polishchuk, V. and Poznanskyi, A. S. (2025) ‘Thermomechanical Parameters Modelling of Spring Force Elements Made of Shape Memory Alloys’, Materials, 18(13), p. 3055. doi:10.3390/ma18133055.
IEEE
O. Łastowska, V. Polishchuk, and A. S. Poznanskyi, “Thermomechanical Parameters Modelling of Spring Force Elements Made of Shape Memory Alloys,” Materials, vol. 18, no. 13, p. 3055, 2025, doi: 10.3390/ma18133055.
BibTeX
@article{astowska2025thermomechanical,
title = {{Thermomechanical Parameters Modelling of Spring Force Elements Made of Shape Memory Alloys}},
author = {Łastowska, Olga and Polishchuk, Vitaliy and Poznanskyi, Andrii S.},
journal = {Materials},
year = {2025},
volume = {18},
number = {13},
pages = {3055},
doi = {10.3390/ma18133055},
url = {https://doi.org/10.3390/ma18133055}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations
- shape memory alloys
- SMA springs
- austenite-martensite transformation
- phenomenological constitutive model
- internal variables
- residual strain
- cyclic loading
- thermal cycling
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Łastowska, O., Polishchuk, V., & Poznanskyi, A. S. (2025). Thermomechanical Parameters Modelling of Spring Force Elements Made of Shape Memory Alloys. Materials, 18(13), 3055. https://doi.org/10.3390/ma18133055
How many times has this paper been cited?
2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials: sign in and open the PDF from this page.
Who wrote this paper?
Olga Łastowska, Vitaliy Polishchuk, Andrii S. Poznanskyi.
What is the DOI of this paper?
10.3390/ma18133055, permanently at https://doi.org/10.3390/ma18133055. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.