Journal article · 2012 · Open access
The Study of High Speed Micro-Drilling Performance and Machining Quality of Coated Micro-Drills with Zr-C:H Coatings
Advanced materials research, 591-593, 342–346 · Published 29 November 2012 · DOI 10.4028/www.scientific.net/amr.591-593.342
In brief
“The Study of High Speed Micro-Drilling Performance and Machining Quality of Coated Micro-Drills with Zr-C:H Coatings” is a 2012 journal article by W.H. Kao and 4 co-authors, published in Advanced materials research. OpenAlex counts 6 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.
- Citations
- 6
- Most cited in
- 2018 (2)
- Field-weighted impact
- 0.53
- References
- 13
- Authors
- 5
Abstract
The Zr-C:H coatings with various C2H2 flow rate were deposited on micro-drills (a diameter of 0.2 mm) used a closed field unbalanced magnetron sputtering system. The ultrahigh speed (drilling speed of 160000 rpm) through-hole drilling printed circuit board tests used to evaluate the drilling performance of the coated micro-drills. The rejection criteria of service lives of the coated micro-drills were evaluated using two different criteria: (1) a nail head ratio greater than 1.5; (2) a drilled hole surface roughness greater than 25.4 μm. Adopting a service life criterion of a nail head ratio of 1.5, the Zr-C:H-5 coating possesses the optimal high-speed machining performance, which yields a micro-drill lifetime of above 6000 drilled holes. It represents a three-fold improvement on that of an uncoated micro-drill and it also improves machining quality.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kao, W., Su, Y. L., Yao, S. H., Huang, H. C., & Chen, M.-S. (2012). The Study of High Speed Micro-Drilling Performance and Machining Quality of Coated Micro-Drills with Zr-C:H Coatings. Advanced materials research, 591-593, 342–346. https://doi.org/10.4028/www.scientific.net/amr.591-593.342
MLA 9
Kao, W.H., et al. “The Study of High Speed Micro-Drilling Performance and Machining Quality of Coated Micro-Drills with Zr-C:H Coatings.” Advanced materials research, vol. 591-593, 2012, pp. 342–346. https://doi.org/10.4028/www.scientific.net/amr.591-593.342.
Chicago
Kao, W.H., Yean Liang Su, Sun Hui Yao, Hsi Chuan Huang, and Ming-Shu Chen. 2012. “The Study of High Speed Micro-Drilling Performance and Machining Quality of Coated Micro-Drills with Zr-C:H Coatings.” Advanced materials research 591-593: 342–346. https://doi.org/10.4028/www.scientific.net/amr.591-593.342.
Harvard
Kao, W. et al. (2012) ‘The Study of High Speed Micro-Drilling Performance and Machining Quality of Coated Micro-Drills with Zr-C:H Coatings’, Advanced materials research, 591-593, pp. 342–346. doi:10.4028/www.scientific.net/amr.591-593.342.
IEEE
W. Kao, Y. L. Su, S. H. Yao, H. C. Huang, and M.-S. Chen, “The Study of High Speed Micro-Drilling Performance and Machining Quality of Coated Micro-Drills with Zr-C:H Coatings,” Advanced materials research, vol. 591-593, pp. 342–346, 2012, doi: 10.4028/www.scientific.net/amr.591-593.342.
BibTeX
@article{kao2012study,
title = {{The Study of High Speed Micro-Drilling Performance and Machining Quality of Coated Micro-Drills with Zr-C:H Coatings}},
author = {Kao, W.H. and Su, Yean Liang and Yao, Sun Hui and Huang, Hsi Chuan and Chen, Ming-Shu},
journal = {Advanced materials research},
year = {2012},
volume = {591-593},
pages = {342--346},
doi = {10.4028/www.scientific.net/amr.591-593.342},
url = {https://doi.org/10.4028/www.scientific.net/amr.591-593.342}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2014 | 1 | |
| 2018 | 2 | |
| 2023 | 1 | |
| 2025 | 1 | |
| 2026 | 1 |
Its field-weighted citation impact is 0.53: it has been cited 0.53 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- micro-drilling
- high-speed machining
- through-hole drilling
- printed circuit boards
- unbalanced magnetron sputtering
- hole surface roughness
- machining quality
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Kao, W., Su, Y. L., Yao, S. H., Huang, H. C., & Chen, M.-S. (2012). The Study of High Speed Micro-Drilling Performance and Machining Quality of Coated Micro-Drills with Zr-C:H Coatings. Advanced materials research, 591-593, 342–346. https://doi.org/10.4028/www.scientific.net/amr.591-593.342
How many times has this paper been cited?
6 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advanced materials research: sign in and open the full text from this page.
Who wrote this paper?
W.H. Kao, Yean Liang Su, Sun Hui Yao, Hsi Chuan Huang, Ming-Shu Chen.
What is the DOI of this paper?
10.4028/www.scientific.net/amr.591-593.342, permanently at https://doi.org/10.4028/www.scientific.net/amr.591-593.342. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.