Journal article · 2013 · Open access
The Microstructure and Tribological Behavior of Ti/a-C and Ti/a-C:H Films Prepared by Magnetron Sputtering
Applied Mechanics and Materials, 420, 123–128 · Published 1 September 2013 · DOI 10.4028/www.scientific.net/amm.420.123
In brief
“The Microstructure and Tribological Behavior of Ti/a-C and Ti/a-C:H Films Prepared by Magnetron Sputtering” is a 2013 journal article by Chun Fu Hong and 6 co-authors, published in Applied Mechanics and Materials. OpenAlex counts 0 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Applied Mechanics and Materials.
- Citations
- 0
- References
- 9
- Authors
- 7
Abstract
This paper reports two films, Ti/a-C and Ti/a-C:H, prepared on the Ti-6Al-4V alloys by magnetron sputtering in PVD and CVD process, respectively. The morphology and microstructure were characterized by Raman spectroscopy, scanning electron microscopy and transmission electron microscopy. Both films show nanosized Ti clusters incorporated into the amorphous carbon matrix. Mechanical properties of the films were investigated by nanoindentation and ball-on-disk tribo-test. Ti/a-C film shows a hardness as high as 40.9 GPa, while that of Ti/a-C:H is 12.2 GPa. Both films show reduced friction and high wear resistance.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Hong, C. F., Wang, J., Yan, W., Ding, A., Liu, Z. Y., Lin, G. P., & Tu, J. P. (2013). The Microstructure and Tribological Behavior of Ti/a-C and Ti/a-C:H Films Prepared by Magnetron Sputtering. Applied Mechanics and Materials, 420, 123–128. https://doi.org/10.4028/www.scientific.net/amm.420.123
MLA 9
Hong, Chun Fu, et al. “The Microstructure and Tribological Behavior of Ti/a-C and Ti/a-C:H Films Prepared by Magnetron Sputtering.” Applied Mechanics and Materials, vol. 420, 2013, pp. 123–128. https://doi.org/10.4028/www.scientific.net/amm.420.123.
Chicago
Hong, Chun Fu, Jianzhong Wang, Wei Yan, Ang Ding, Zhi Yong Liu, Guo Ping Lin, and Jiang Ping Tu. 2013. “The Microstructure and Tribological Behavior of Ti/a-C and Ti/a-C:H Films Prepared by Magnetron Sputtering.” Applied Mechanics and Materials 420: 123–128. https://doi.org/10.4028/www.scientific.net/amm.420.123.
Harvard
Hong, C. F. et al. (2013) ‘The Microstructure and Tribological Behavior of Ti/a-C and Ti/a-C:H Films Prepared by Magnetron Sputtering’, Applied Mechanics and Materials, 420, pp. 123–128. doi:10.4028/www.scientific.net/amm.420.123.
IEEE
C. F. Hong et al., “The Microstructure and Tribological Behavior of Ti/a-C and Ti/a-C:H Films Prepared by Magnetron Sputtering,” Applied Mechanics and Materials, vol. 420, pp. 123–128, 2013, doi: 10.4028/www.scientific.net/amm.420.123.
BibTeX
@article{hong2013microstructure,
title = {{The Microstructure and Tribological Behavior of Ti/a-C and Ti/a-C:H Films Prepared by Magnetron Sputtering}},
author = {Hong, Chun Fu and Wang, Jianzhong and Yan, Wei and Ding, Ang and Liu, Zhi Yong and Lin, Guo Ping and Tu, Jiang Ping},
journal = {Applied Mechanics and Materials},
year = {2013},
volume = {420},
pages = {123--128},
doi = {10.4028/www.scientific.net/amm.420.123},
url = {https://doi.org/10.4028/www.scientific.net/amm.420.123}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- hydrogenated amorphous carbon
- Ti-6Al-4V alloy
- magnetron sputtering
- chemical vapor deposition
- amorphous carbon matrix
- hardness
- friction reduction
- wear resistance
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Hong, C. F., Wang, J., Yan, W., Ding, A., Liu, Z. Y., Lin, G. P., & Tu, J. P. (2013). The Microstructure and Tribological Behavior of Ti/a-C and Ti/a-C:H Films Prepared by Magnetron Sputtering. Applied Mechanics and Materials, 420, 123–128. https://doi.org/10.4028/www.scientific.net/amm.420.123
How many times has this paper been cited?
0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Applied Mechanics and Materials.
Who wrote this paper?
Chun Fu Hong, Jianzhong Wang, Wei Yan, Ang Ding, Zhi Yong Liu, Guo Ping Lin, Jiang Ping Tu.
What is the DOI of this paper?
10.4028/www.scientific.net/amm.420.123. The permanent link is https://doi.org/10.4028/www.scientific.net/amm.420.123.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.