Journal article · 2024 · Open access
The influence of SEN structure on the flow and solidification phenomena in ultra-large-section beam blank mould
Journal of Materials Research and Technology, 30, 9463–9471 · Published 1 May 2024 · DOI 10.1016/j.jmrt.2024.06.007
In brief
“The influence of SEN structure on the flow and solidification phenomena in ultra-large-section beam blank mould” is a 2024 journal article by Zhidan Huang and 5 co-authors, published in Journal of Materials Research and Technology. OpenAlex counts 3 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Journal of Materials Research and Technology.
- Citations
- 3
- Most cited in
- 2024 (1)
- Field-weighted impact
- 0.32
- References
- 31
- Authors
- 6
Abstract
Due to the complex cross-section and scale effects, surface and internal defects are prone to occur in the Ultra-large-section beam blank. In this study, a coupled model of steel liquid flow and heat transfer within a 1300×510×140 mm cross-section beam blank mould was established. The results indicate that Single-port SEN reduced the flow activity on the meniscus, and the three-ports SEN led to significant high temperature zones and re-melting of the solidified shell in the flange tip and web. The four-ports nozzle not only optimizes the internal flow behavior of the mould but also enhances the temperature and radial uniformity of solidification. The maximum circumferential difference in shell thickness under the four-ports SEN was only 8.1 mm, compared to 13.2 mm and 13.8 mm under the single-port and three-ports SEN, respectively.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Huang, Z., Yang, X., Gao, Q., Chen, Z., Long, M., & Chen, D. (2024). The influence of SEN structure on the flow and solidification phenomena in ultra-large-section beam blank mould. Journal of Materials Research and Technology, 30, 9463–9471. https://doi.org/10.1016/j.jmrt.2024.06.007
MLA 9
Huang, Zhidan, et al. “The influence of SEN structure on the flow and solidification phenomena in ultra-large-section beam blank mould.” Journal of Materials Research and Technology, vol. 30, 2024, pp. 9463–9471. https://doi.org/10.1016/j.jmrt.2024.06.007.
Chicago
Huang, Zhidan, Xinhua Yang, Qi Gao, Zhenyao Chen, Mujun Long, and Dengfu Chen. 2024. “The influence of SEN structure on the flow and solidification phenomena in ultra-large-section beam blank mould.” Journal of Materials Research and Technology 30: 9463–9471. https://doi.org/10.1016/j.jmrt.2024.06.007.
Harvard
Huang, Z. et al. (2024) ‘The influence of SEN structure on the flow and solidification phenomena in ultra-large-section beam blank mould’, Journal of Materials Research and Technology, 30, pp. 9463–9471. doi:10.1016/j.jmrt.2024.06.007.
IEEE
Z. Huang, X. Yang, Q. Gao, Z. Chen, M. Long, and D. Chen, “The influence of SEN structure on the flow and solidification phenomena in ultra-large-section beam blank mould,” Journal of Materials Research and Technology, vol. 30, pp. 9463–9471, 2024, doi: 10.1016/j.jmrt.2024.06.007.
BibTeX
@article{huang2024influence,
title = {{The influence of SEN structure on the flow and solidification phenomena in ultra-large-section beam blank mould}},
author = {Huang, Zhidan and Yang, Xinhua and Gao, Qi and Chen, Zhenyao and Long, Mujun and Chen, Dengfu},
journal = {Journal of Materials Research and Technology},
year = {2024},
volume = {30},
pages = {9463--9471},
doi = {10.1016/j.jmrt.2024.06.007},
url = {https://doi.org/10.1016/j.jmrt.2024.06.007}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 1 | |
| 2025 | 1 | |
| 2026 | 1 |
Its field-weighted citation impact is 0.32: it has been cited 0.32 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics
- submerged entry nozzle
- solidification
- meniscus flow
- remelting
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Huang, Z., Yang, X., Gao, Q., Chen, Z., Long, M., & Chen, D. (2024). The influence of SEN structure on the flow and solidification phenomena in ultra-large-section beam blank mould. Journal of Materials Research and Technology, 30, 9463–9471. https://doi.org/10.1016/j.jmrt.2024.06.007
How many times has this paper been cited?
3 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Journal of Materials Research and Technology: sign in and open the full text from this page.
Who wrote this paper?
Zhidan Huang, Xinhua Yang, Qi Gao, Zhenyao Chen, Mujun Long, Dengfu Chen.
What is the DOI of this paper?
10.1016/j.jmrt.2024.06.007, permanently at https://doi.org/10.1016/j.jmrt.2024.06.007. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.