Journal article · 2019 · Open access

The influence of heat treatment on microstructure and phase transformation Temperatures of Cu-Al-Ni shape memory alloy

Ivana Ivanić, Mirko Gojić, Borut Kosec, Tamara Holjevac Grgurić, Stjepan Kožuh

Kemija u industriji, 68(3-4), 111–118 · Published 1 January 2019 · DOI 10.15255/kui.2018.037

Open full textCite this paper

In brief

“The influence of heat treatment on microstructure and phase transformation Temperatures of Cu-Al-Ni shape memory alloy” is a 2019 journal article by Ivana Ivanić and 4 co-authors, published in Kemija u industriji. OpenAlex counts 5 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Kemija u industriji.

Citations
5
Most cited in
2020 (3)
Field-weighted impact
0.39
References
24
Authors
5

Abstract

This paper presents the results of thermal and microstructural analysis of Cu-Al-Ni shape memory alloy before and after heat treatment. After casting, a bar of Cu-12.8 Al-4.1 Ni (wt.%) alloy, obtained by the vertical continuous casting technique, was subjected to a certain heat treatment procedure. Solution annealing was performed at 850 °C for 60 min, followed by water quenching. Tempering was then performed at four different temperatures (150 °C, 200 °C, 250 °C and 300 °C). The microstructural results were obtained by optical and scanning electron microscopy. Thermodynamic calculation of ternary Cu-Al-Ni system under equilibrium was performed using Thermo-Calc 5 software. Phase transformation temperatures were determined by differential scanning calorimetry (DSC). The DSC results show the highest values of transformation temperatures in as-cast state. After solution annealing and tempering, the transformation temperatures show lower values with exceptional stability of Ms temperature (martensite start temperature).

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Ivanić, I., Gojić, M., Kosec, B., Grgurić, T. H., & Kožuh, S. (2019). The influence of heat treatment on microstructure and phase transformation Temperatures of Cu-Al-Ni shape memory alloy. Kemija u industriji, 68(3-4), 111–118. https://doi.org/10.15255/kui.2018.037

MLA 9

Ivanić, Ivana, et al. “The influence of heat treatment on microstructure and phase transformation Temperatures of Cu-Al-Ni shape memory alloy.” Kemija u industriji, vol. 68, no. 3-4, 2019, pp. 111–118. https://doi.org/10.15255/kui.2018.037.

Chicago

Ivanić, Ivana, Mirko Gojić, Borut Kosec, Tamara Holjevac Grgurić, and Stjepan Kožuh. 2019. “The influence of heat treatment on microstructure and phase transformation Temperatures of Cu-Al-Ni shape memory alloy.” Kemija u industriji 68 (3-4): 111–118. https://doi.org/10.15255/kui.2018.037.

Harvard

Ivanić, I. et al. (2019) ‘The influence of heat treatment on microstructure and phase transformation Temperatures of Cu-Al-Ni shape memory alloy’, Kemija u industriji, 68(3-4), pp. 111–118. doi:10.15255/kui.2018.037.

IEEE

I. Ivanić, M. Gojić, B. Kosec, T. H. Grgurić, and S. Kožuh, “The influence of heat treatment on microstructure and phase transformation Temperatures of Cu-Al-Ni shape memory alloy,” Kemija u industriji, vol. 68, no. 3-4, pp. 111–118, 2019, doi: 10.15255/kui.2018.037.

BibTeX

@article{ivanic2019influence,
  title     = {{The influence of heat treatment on microstructure and phase transformation Temperatures of Cu-Al-Ni shape memory alloy}},
  author    = {Ivanić, Ivana and Gojić, Mirko and Kosec, Borut and Grgurić, Tamara Holjevac and Kožuh, Stjepan},
  journal   = {Kemija u industriji},
  year      = {2019},
  volume    = {68},
  number    = {3-4},
  pages     = {111--118},
  doi       = {10.15255/kui.2018.037},
  url       = {https://doi.org/10.15255/kui.2018.037}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201911
202033
202211

Its field-weighted citation impact is 0.39: it has been cited 0.39 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • Cu-Al-Ni shape memory alloy
  • heat treatment
  • solution treatment
  • tempering
  • microstructure
  • transformation temperature
  • martensite start temperature
  • vertical continuous casting

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Ivanić, I., Gojić, M., Kosec, B., Grgurić, T. H., & Kožuh, S. (2019). The influence of heat treatment on microstructure and phase transformation Temperatures of Cu-Al-Ni shape memory alloy. Kemija u industriji, 68(3-4), 111–118. https://doi.org/10.15255/kui.2018.037

How many times has this paper been cited?

5 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Kemija u industriji: sign in and open the full text from this page.

Who wrote this paper?

Ivana Ivanić, Mirko Gojić, Borut Kosec, Tamara Holjevac Grgurić, Stjepan Kožuh.

What is the DOI of this paper?

10.15255/kui.2018.037, permanently at https://doi.org/10.15255/kui.2018.037. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.