Paper · 2010 · Open access
The Influence of Cyclic Straining in Torsion on Fatigue Resistance and Torsional Properties of ProTaper NiTi Endodontic Instruments
Materials science forum, 643, 79–90 · Published 1 March 2010 · DOI 10.4028/www.scientific.net/msf.643.79
In brief
“The Influence of Cyclic Straining in Torsion on Fatigue Resistance and Torsional Properties of ProTaper NiTi Endodontic Instruments” is a 2010 paper by Renata de Castro Martins and 2 co-authors, published in Materials science forum. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials science forum.
- Citations
- 0
- References
- 30
- Authors
- 3
Abstract
This study evaluated the influence of cyclic straining in torsion on fatigue resistance and torsional properties of ProTaper (S1, S2, F1, F2, F3) NiTi instruments. The mechanical behavior was evaluated by means of torsion and bending tests, performed according to ISO 3630-1 specification, while the fatigue resistance was evaluated using a bench test device employing an artificial canal with 5mm curvature radius and angle of curvature of 45º. The dimensional aspects, diameter (D3) and cross-sectional area (A3) at 3mm from the tip of the instruments were determined by means of image analysis of optical and scanning electron microscopy (SEM). The surface characteristics of instruments before and after they were submitted to cyclic straining in torsion and the morphological aspects of the fractured surfaces were analyzed by SEM. The maximum torque and the bending moment at 45º were higher for instruments with larger D3 and A3. The F1 and F2 instruments followed the Coffin-Manson’s relation, i.e., their number of cycles to failure (NCF) varied inversely with the strain amplitude. With the exception of S1 and S2 instruments, there was a tendency of decreasing the maximum torque after the instruments have been submitted to cyclic straining in torsion. With the exception of S1 instruments, there was a tendency of decreasing the NCF after torsional cycling. The analyses by SEM showed the presence of longitudinal cracks on the instruments previously cycled in torsion. The morphological aspects of the fractured surfaces of instruments tested in torsion or flexural fatigue did not changed by the cyclic straining in torsion. These changes in mechanical properties with torsional cycling can be related to the generation of imperfections such as longitudinal cracks on the instruments.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Martins, R. D. C., Bahia, M. G. D. A., & Buono, V. T. L. (2010). The Influence of Cyclic Straining in Torsion on Fatigue Resistance and Torsional Properties of ProTaper NiTi Endodontic Instruments. Materials science forum, 643, 79–90. https://doi.org/10.4028/www.scientific.net/msf.643.79
MLA 9
Martins, Renata de Castro, et al. “The Influence of Cyclic Straining in Torsion on Fatigue Resistance and Torsional Properties of ProTaper NiTi Endodontic Instruments.” Materials science forum, vol. 643, 2010, pp. 79–90. https://doi.org/10.4028/www.scientific.net/msf.643.79.
Chicago
Martins, Renata de Castro, Maria Guiomar de Azevedo Bahia, and Vicente Tadeu Lopes Buono. 2010. “The Influence of Cyclic Straining in Torsion on Fatigue Resistance and Torsional Properties of ProTaper NiTi Endodontic Instruments.” Materials science forum 643: 79–90. https://doi.org/10.4028/www.scientific.net/msf.643.79.
Harvard
Martins, R. D. C., Bahia, M. G. D. A. and Buono, V. T. L. (2010) ‘The Influence of Cyclic Straining in Torsion on Fatigue Resistance and Torsional Properties of ProTaper NiTi Endodontic Instruments’, Materials science forum, 643, pp. 79–90. doi:10.4028/www.scientific.net/msf.643.79.
IEEE
R. D. C. Martins, M. G. D. A. Bahia, and V. T. L. Buono, “The Influence of Cyclic Straining in Torsion on Fatigue Resistance and Torsional Properties of ProTaper NiTi Endodontic Instruments,” Materials science forum, vol. 643, pp. 79–90, 2010, doi: 10.4028/www.scientific.net/msf.643.79.
BibTeX
@article{martins2010influence,
title = {{The Influence of Cyclic Straining in Torsion on Fatigue Resistance and Torsional Properties of ProTaper NiTi Endodontic Instruments}},
author = {Martins, Renata de Castro and Bahia, Maria Guiomar de Azevedo and Buono, Vicente Tadeu Lopes},
journal = {Materials science forum},
year = {2010},
volume = {643},
pages = {79--90},
doi = {10.4028/www.scientific.net/msf.643.79},
url = {https://doi.org/10.4028/www.scientific.net/msf.643.79}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Health Sciences › Dentistry › Oral Surgery › Endodontics and Root Canal Treatments
- fatigue resistance
- torsional properties
- number of cycles to failure
- Coffin-Manson relation
- longitudinal cracks
- fracture morphology
- peak torque
- bending fatigue
Work with this paper
Most-cited papers in Dentistry
- Periodontal Disease in Pregnancy II. Correlation Between Oral Hygiene and Periodontal ConditionJohn Silness, Harald A. Löe · Acta Odontologica Scandinavica · 1964 · 8,071 citations
- Periodontal Disease in Pregnancy I. Prevalence and SeverityHarald A. Löe, John Silness · Acta Odontologica Scandinavica · 1963 · 7,339 citations
- Microbial complexes in subgingival plaqueS. S. Socransky, Anne D. Haffajee, MaryAnn Cugini and 2 more · Journal Of Clinical Periodontology · 1998 · 5,207 citations
- Development of a Classification System for Periodontal Diseases and ConditionsGary C. Armitage · Annals of Periodontology · 1999 · 5,198 citations
- Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) for Clinical and Research Applications: Recommendations of the International RDC/TMD Consortium Network* and Orofacial Pain Special Interest Group†ERIC L. SCHIFFMAN, Richard K. Ohrbach, Edmond L. Truelove and 27 more · Journal of Oral & Facial Pain and Headache · 2014 · 4,942 citations
Questions about this paper
How do I cite this paper in APA style?
Martins, R. D. C., Bahia, M. G. D. A., & Buono, V. T. L. (2010). The Influence of Cyclic Straining in Torsion on Fatigue Resistance and Torsional Properties of ProTaper NiTi Endodontic Instruments. Materials science forum, 643, 79–90. https://doi.org/10.4028/www.scientific.net/msf.643.79
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials science forum: sign in and open the full text from this page.
Who wrote this paper?
Renata de Castro Martins, Maria Guiomar de Azevedo Bahia, Vicente Tadeu Lopes Buono.
What is the DOI of this paper?
10.4028/www.scientific.net/msf.643.79, permanently at https://doi.org/10.4028/www.scientific.net/msf.643.79. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.