Journal article · 2021 · Open access

The influence of aging treatment on the microstructural and mechanical behavior by ultra-micro hardness tester in Ni-rich NiTi alloy

Naiara Vieira Le Sénèchal, Rodolfo da Silva Teixeira, Patrícia Freitas Rodrigues, Shimeni Baptista Ribeiro, Andersan dos Santos Paula

Cadernos UniFOA, 16(47) · Published 26 November 2021 · DOI 10.47385/cadunifoa.v16.n47.3810

Open PDFView at the publisherCite this paper

In brief

“The influence of aging treatment on the microstructural and mechanical behavior by ultra-micro hardness tester in Ni-rich NiTi alloy” is a 2021 journal article by Naiara Vieira Le Sénèchal and 4 co-authors, published in Cadernos UniFOA. OpenAlex counts 4 citations as of 22 November 2026. It is open access under a CC BY-NC-SA licence: the full text is free to read at Cadernos UniFOA.

Citations
4
Most cited in
2024 (2)
Field-weighted impact
0.20
References
22
Authors
5

Abstract

The present study aims to assess the superelasticity behavior in Ni-rich NiTi alloy wire produced by rotary forging process. The thermomechanical process involved four steps of hot working at 800ºC, two steps of cold working with solution heat treatment at 800ºC between them, and subsequently a solution heat treatment (950ºC during 2 hours) followed by aging treatment at 350, 400 and 450 ºC during 30 minutes. X-ray diffraction (XRD) and instrumented ultra-micro hardness testers evaluated the present phase at each aged sample and were compared with their mechanical behavior. The results put in evidence the work-hardening effect on a forged condition associated with the final step of cold rotary forging. The solution treatment promotes stress relaxation and precipitate dissolution. The sample heat-treated shows the presence of the precipitated (Ni4Ti3) and R phase. The presence of these precipitates is beneficial because precipitation-hardening increases the yield strength of austenite, which in turn contributes to better functional stability.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Le Sénèchal, N. V., Teixeira, R. D. S., Rodrigues, P. F., Ribeiro, S. B., & Paula, A. D. S. (2021). The influence of aging treatment on the microstructural and mechanical behavior by ultra-micro hardness tester in Ni-rich NiTi alloy. Cadernos UniFOA, 16(47). https://doi.org/10.47385/cadunifoa.v16.n47.3810

MLA 9

Le Sénèchal, Naiara Vieira, et al. “The influence of aging treatment on the microstructural and mechanical behavior by ultra-micro hardness tester in Ni-rich NiTi alloy.” Cadernos UniFOA, vol. 16, no. 47, 2021. https://doi.org/10.47385/cadunifoa.v16.n47.3810.

Chicago

Le Sénèchal, Naiara Vieira, Rodolfo da Silva Teixeira, Patrícia Freitas Rodrigues, Shimeni Baptista Ribeiro, and Andersan dos Santos Paula. 2021. “The influence of aging treatment on the microstructural and mechanical behavior by ultra-micro hardness tester in Ni-rich NiTi alloy.” Cadernos UniFOA 16 (47). https://doi.org/10.47385/cadunifoa.v16.n47.3810.

Harvard

Le Sénèchal, N. V. et al. (2021) ‘The influence of aging treatment on the microstructural and mechanical behavior by ultra-micro hardness tester in Ni-rich NiTi alloy’, Cadernos UniFOA, 16(47). doi:10.47385/cadunifoa.v16.n47.3810.

IEEE

N. V. Le Sénèchal, R. D. S. Teixeira, P. F. Rodrigues, S. B. Ribeiro, and A. D. S. Paula, “The influence of aging treatment on the microstructural and mechanical behavior by ultra-micro hardness tester in Ni-rich NiTi alloy,” Cadernos UniFOA, vol. 16, no. 47, 2021, doi: 10.47385/cadunifoa.v16.n47.3810.

BibTeX

@article{lesenechal2021influence,
  title     = {{The influence of aging treatment on the microstructural and mechanical behavior by ultra-micro hardness tester in Ni-rich NiTi alloy}},
  author    = {Le Sénèchal, Naiara Vieira and Teixeira, Rodolfo da Silva and Rodrigues, Patrícia Freitas and Ribeiro, Shimeni Baptista and Paula, Andersan dos Santos},
  journal   = {Cadernos UniFOA},
  year      = {2021},
  volume    = {16},
  number    = {47},
  doi       = {10.47385/cadunifoa.v16.n47.3810},
  url       = {https://doi.org/10.47385/cadunifoa.v16.n47.3810}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202311
202422
202611

Its field-weighted citation impact is 0.20: it has been cited 0.20 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • Ni-rich NiTi alloys
  • aging treatment
  • superelasticity
  • rotary forging
  • solution treatment
  • precipitation hardening
  • Ni4Ti3 precipitates
  • R-phase

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Le Sénèchal, N. V., Teixeira, R. D. S., Rodrigues, P. F., Ribeiro, S. B., & Paula, A. D. S. (2021). The influence of aging treatment on the microstructural and mechanical behavior by ultra-micro hardness tester in Ni-rich NiTi alloy. Cadernos UniFOA, 16(47). https://doi.org/10.47385/cadunifoa.v16.n47.3810

How many times has this paper been cited?

4 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Cadernos UniFOA: sign in and open the PDF from this page.

Who wrote this paper?

Naiara Vieira Le Sénèchal, Rodolfo da Silva Teixeira, Patrícia Freitas Rodrigues, Shimeni Baptista Ribeiro, Andersan dos Santos Paula.

What is the DOI of this paper?

10.47385/cadunifoa.v16.n47.3810, permanently at https://doi.org/10.47385/cadunifoa.v16.n47.3810. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.