Journal article · 2019 · Open access
The Influence of A Mo Addition on the Interfacial Morphologies and Corrosion Resistances of Novel Fe-Cr-B Alloys Immersed in Molten Aluminum
Materials, 12(2), 256 · Published 14 January 2019 · DOI 10.3390/ma12020256
In brief
“The Influence of A Mo Addition on the Interfacial Morphologies and Corrosion Resistances of Novel Fe-Cr-B Alloys Immersed in Molten Aluminum” is a 2019 journal article by Zicheng Ling and 5 co-authors, published in Materials. OpenAlex counts 24 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials.
- Citations
- 24
- Most cited in
- 2022 (5)
- Field-weighted impact
- 1.37
- References
- 44
- Authors
- 6
Abstract
The influence of a Mo addition on the interfacial morphologies and corrosion resistances of novel Fe-Cr-B alloys in molten aluminum at 750 °C was systematically investigated using scanning electron microscopy, X-ray diffractometer, electron probe microanalysis, and transmission electron microscopy. The results indicated that Mo could not only strengthen the matrix but also facilitate the formation of borides. Furthermore, the microstructures of Mo-rich M₂B boride changed from a local eutectic net-like structure to a typical coarse dendritic structure and a blocky hypereutectic structure with increasing Mo addition. This was true of the blocky Mo-rich M₂B boride, rod-like Cr-rich M₂B boride and the corrosion products, which had a synergistic effect on retarding of the diffusion of molten aluminum. Notably, the corrosion resistance of the Fe-Cr-B-Mo alloy, with an 8.3 wt.% Mo addition, was 3.8 times higher than that of H13 steel.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Ling, Z., Chen, W., Xu, W., Zhang, X., Lu, T., & Liu, J. (2019). The Influence of A Mo Addition on the Interfacial Morphologies and Corrosion Resistances of Novel Fe-Cr-B Alloys Immersed in Molten Aluminum. Materials, 12(2), 256. https://doi.org/10.3390/ma12020256
MLA 9
Ling, Zicheng, et al. “The Influence of A Mo Addition on the Interfacial Morphologies and Corrosion Resistances of Novel Fe-Cr-B Alloys Immersed in Molten Aluminum.” Materials, vol. 12, no. 2, 2019, p. 256. https://doi.org/10.3390/ma12020256.
Chicago
Ling, Zicheng, Weiping Chen, Weiye Xu, Xianman Zhang, Tiwen Lu, and Jian Liu. 2019. “The Influence of A Mo Addition on the Interfacial Morphologies and Corrosion Resistances of Novel Fe-Cr-B Alloys Immersed in Molten Aluminum.” Materials 12 (2): 256. https://doi.org/10.3390/ma12020256.
Harvard
Ling, Z. et al. (2019) ‘The Influence of A Mo Addition on the Interfacial Morphologies and Corrosion Resistances of Novel Fe-Cr-B Alloys Immersed in Molten Aluminum’, Materials, 12(2), p. 256. doi:10.3390/ma12020256.
IEEE
Z. Ling, W. Chen, W. Xu, X. Zhang, T. Lu, and J. Liu, “The Influence of A Mo Addition on the Interfacial Morphologies and Corrosion Resistances of Novel Fe-Cr-B Alloys Immersed in Molten Aluminum,” Materials, vol. 12, no. 2, p. 256, 2019, doi: 10.3390/ma12020256.
BibTeX
@article{ling2019influence,
title = {{The Influence of A Mo Addition on the Interfacial Morphologies and Corrosion Resistances of Novel Fe-Cr-B Alloys Immersed in Molten Aluminum}},
author = {Ling, Zicheng and Chen, Weiping and Xu, Weiye and Zhang, Xianman and Lu, Tiwen and Liu, Jian},
journal = {Materials},
year = {2019},
volume = {12},
number = {2},
pages = {256},
doi = {10.3390/ma12020256},
url = {https://doi.org/10.3390/ma12020256}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2019 | 2 | |
| 2020 | 1 | |
| 2021 | 2 | |
| 2022 | 5 | |
| 2023 | 1 | |
| 2024 | 4 | |
| 2025 | 4 | |
| 2026 | 5 |
Its field-weighted citation impact is 1.37: it has been cited 1.37 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Materials Science › Metals and Alloys › Metal Alloys Wear and Properties
- Fe-Cr-B alloys
- molybdenum addition
- molten aluminum
- interfacial morphology
- corrosion resistance
- dendritic morphology
- corrosion products
- refractory alloys
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Ling, Z., Chen, W., Xu, W., Zhang, X., Lu, T., & Liu, J. (2019). The Influence of A Mo Addition on the Interfacial Morphologies and Corrosion Resistances of Novel Fe-Cr-B Alloys Immersed in Molten Aluminum. Materials, 12(2), 256. https://doi.org/10.3390/ma12020256
How many times has this paper been cited?
24 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials: sign in and open the PDF from this page.
Who wrote this paper?
Zicheng Ling, Weiping Chen, Weiye Xu, Xianman Zhang, Tiwen Lu, Jian Liu.
What is the DOI of this paper?
10.3390/ma12020256, permanently at https://doi.org/10.3390/ma12020256. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.