Journal article · 2013 · Open access

The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrate

Han Jun Hu, Hui Di Zhou, Yu Gang Zheng, Kai Feng Zhang, Zhi Hua Wan

Applied Mechanics and Materials, 275-277, 1911–1914 · Published 1 January 2013 · DOI 10.4028/www.scientific.net/amm.275-277.1911

Open full textCite this paper

In brief

“The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrate” is a 2013 journal article by Han Jun Hu and 4 co-authors, published in Applied Mechanics and Materials. OpenAlex counts 4 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Applied Mechanics and Materials.

Citations
4
Most cited in
2016 (1)
Field-weighted impact
0.47
References
4
Authors
5

Abstract

The bonded MoS2 films are widely used as solid lubricants in aerospace mechanisms due to their excellent tribological properties. Traditionally, the MoS2 was directly bonded on the Al substrate that was only treated by the technique named of sandblast. For improving the tribological properties of MoS2 films, micro arc oxidation (MAO) instead of sandblast was introduced as a new technique for treating of Al substrate. In this article, the tribological properties of MoS2 films which were bonded on different surface of Al substrate as mentioned above were discussed, respectively. It was concluded from the test results that the MoS2 films bonded on substrate treated by MAO have better tribological properties than those samples treated by sandblast. The endurance life against abrasion of the former is as high as twenty times of the latter by the stand test method of ball on disk using the UMT Multi-Specimen Test System. This test results could be illustrated by the following reasons. The first is the porous microstructures of MAO ceramic coatings on the Al substrate. The coatings have numerous pits to be good at increasing the binding force with the MoS2 films, and the pits can also provide a MoS2 lubricants reservoir during processes of friction. Both of them improved the MoS2 film’s ability of wear-protective. The second is that hardness of the coating is higher than the Al, and this ensures well wearing resistance, especially in practical application to big load-supporting moving parts, such as bearing, gear, etc…

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Hu, H. J., Di Zhou, H., Zheng, Y. G., Zhang, K. F., & Wan, Z. H. (2013). The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrate. Applied Mechanics and Materials, 275-277, 1911–1914. https://doi.org/10.4028/www.scientific.net/amm.275-277.1911

MLA 9

Hu, Han Jun, et al. “The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrate.” Applied Mechanics and Materials, vol. 275-277, 2013, pp. 1911–1914. https://doi.org/10.4028/www.scientific.net/amm.275-277.1911.

Chicago

Hu, Han Jun, Hui Di Zhou, Yu Gang Zheng, Kai Feng Zhang, and Zhi Hua Wan. 2013. “The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrate.” Applied Mechanics and Materials 275-277: 1911–1914. https://doi.org/10.4028/www.scientific.net/amm.275-277.1911.

Harvard

Hu, H. J. et al. (2013) ‘The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrate’, Applied Mechanics and Materials, 275-277, pp. 1911–1914. doi:10.4028/www.scientific.net/amm.275-277.1911.

IEEE

H. J. Hu, H. Di Zhou, Y. G. Zheng, K. F. Zhang, and Z. H. Wan, “The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrate,” Applied Mechanics and Materials, vol. 275-277, pp. 1911–1914, 2013, doi: 10.4028/www.scientific.net/amm.275-277.1911.

BibTeX

@article{hu2013improved,
  title     = {{The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrate}},
  author    = {Hu, Han Jun and Di Zhou, Hui and Zheng, Yu Gang and Zhang, Kai Feng and Wan, Zhi Hua},
  journal   = {Applied Mechanics and Materials},
  year      = {2013},
  volume    = {275-277},
  pages     = {1911--1914},
  doi       = {10.4028/www.scientific.net/amm.275-277.1911},
  url       = {https://doi.org/10.4028/www.scientific.net/amm.275-277.1911}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201611
201811
202211
202511

Its field-weighted citation impact is 0.47: it has been cited 0.47 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering

  • MoS2 films
  • plasma electrolytic oxidation
  • aluminum substrate
  • solid lubricants
  • tribological properties
  • ceramic coatings
  • wear resistance
  • coating porosity

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Hu, H. J., Di Zhou, H., Zheng, Y. G., Zhang, K. F., & Wan, Z. H. (2013). The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrate. Applied Mechanics and Materials, 275-277, 1911–1914. https://doi.org/10.4028/www.scientific.net/amm.275-277.1911

How many times has this paper been cited?

4 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Applied Mechanics and Materials: sign in and open the full text from this page.

Who wrote this paper?

Han Jun Hu, Hui Di Zhou, Yu Gang Zheng, Kai Feng Zhang, Zhi Hua Wan.

What is the DOI of this paper?

10.4028/www.scientific.net/amm.275-277.1911, permanently at https://doi.org/10.4028/www.scientific.net/amm.275-277.1911. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.