Journal article · 2026 · Open access
The Effects of TiAlN Coated Carbide Inserts in Milling Hardened JIS SKD11 Cold Work Tool Steel
International Journal of Engineering Trends and Technology, 74(1), 217–226 · Published 20 January 2026 · DOI 10.14445/22315381/ijett-v74i1p116
In brief
“The Effects of TiAlN Coated Carbide Inserts in Milling Hardened JIS SKD11 Cold Work Tool Steel” is a 2026 journal article by Kamaruddin Kamdani and 3 co-authors, published in International Journal of Engineering Trends and Technology. OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at International Journal of Engineering Trends and Technology.
- Citations
- 0
- References
- 40
- Authors
- 4
Abstract
This research explores the behaviour and performance of TiAlN-coated carbide inserts during the dry milling of hardened JIS SKD11 tool steel, especially in regard to tool life, wear mechanism, surface finish, vibration character, and chip formation during the operation at different cutting speeds and feed rates. Results of the study indicate that the cutting speed is the most influential of the die cutting parameters in determining the tool life, as the higher cutting speeds quickly lead to advanced wear of the tool and diminish the wear resistance of the tool significantly. A better surface finish was produced at lower feed and cutting speeds due to lesser thermal and mechanical loads on the cutting edge. At higher cutting speeds, advancing notch wear was the main mechanism of tool wear, while greater amounts of tool wear produced commensurately higher amounts of vibration and lesser machining stability. The morphology of the chips produced changed from continuous to segmented as the cutting temperature increased, indicative of thermal softening and cutting zone instability. The research is of great significance in demonstrating the behaviour of TiAlN-coated carbide inserts in hard milling and shows the necessity of ascertaining certain cutting parameters to optimize tooling and surface quality in machining hardened steels.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kamdani, K., Marwah, O. M. F., Mohid, Z., & Fadzulli, F. (2026). The Effects of TiAlN Coated Carbide Inserts in Milling Hardened JIS SKD11 Cold Work Tool Steel. International Journal of Engineering Trends and Technology, 74(1), 217–226. https://doi.org/10.14445/22315381/ijett-v74i1p116
MLA 9
Kamdani, Kamaruddin, et al. “The Effects of TiAlN Coated Carbide Inserts in Milling Hardened JIS SKD11 Cold Work Tool Steel.” International Journal of Engineering Trends and Technology, vol. 74, no. 1, 2026, pp. 217–226. https://doi.org/10.14445/22315381/ijett-v74i1p116.
Chicago
Kamdani, Kamaruddin, Omar Mohd Faizan Marwah, Zazuli Mohid, and Fathan Fadzulli. 2026. “The Effects of TiAlN Coated Carbide Inserts in Milling Hardened JIS SKD11 Cold Work Tool Steel.” International Journal of Engineering Trends and Technology 74 (1): 217–226. https://doi.org/10.14445/22315381/ijett-v74i1p116.
Harvard
Kamdani, K. et al. (2026) ‘The Effects of TiAlN Coated Carbide Inserts in Milling Hardened JIS SKD11 Cold Work Tool Steel’, International Journal of Engineering Trends and Technology, 74(1), pp. 217–226. doi:10.14445/22315381/ijett-v74i1p116.
IEEE
K. Kamdani, O. M. F. Marwah, Z. Mohid, and F. Fadzulli, “The Effects of TiAlN Coated Carbide Inserts in Milling Hardened JIS SKD11 Cold Work Tool Steel,” International Journal of Engineering Trends and Technology, vol. 74, no. 1, pp. 217–226, 2026, doi: 10.14445/22315381/ijett-v74i1p116.
BibTeX
@article{kamdani2026effects,
title = {{The Effects of TiAlN Coated Carbide Inserts in Milling Hardened JIS SKD11 Cold Work Tool Steel}},
author = {Kamdani, Kamaruddin and Marwah, Omar Mohd Faizan and Mohid, Zazuli and Fadzulli, Fathan},
journal = {International Journal of Engineering Trends and Technology},
year = {2026},
volume = {74},
number = {1},
pages = {217--226},
doi = {10.14445/22315381/ijett-v74i1p116},
url = {https://doi.org/10.14445/22315381/ijett-v74i1p116}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- TiAlN coating
- coated carbide inserts
- dry grinding
- hardened steel
- SKD11 tool steel
- cold work tool steel
- tool life
- tool wear mechanisms
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Kamdani, K., Marwah, O. M. F., Mohid, Z., & Fadzulli, F. (2026). The Effects of TiAlN Coated Carbide Inserts in Milling Hardened JIS SKD11 Cold Work Tool Steel. International Journal of Engineering Trends and Technology, 74(1), 217–226. https://doi.org/10.14445/22315381/ijett-v74i1p116
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at International Journal of Engineering Trends and Technology: sign in and open the PDF from this page.
Who wrote this paper?
Kamaruddin Kamdani, Omar Mohd Faizan Marwah, Zazuli Mohid, Fathan Fadzulli.
What is the DOI of this paper?
10.14445/22315381/ijett-v74i1p116, permanently at https://doi.org/10.14445/22315381/ijett-v74i1p116. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.