Journal article · 2013 · Open access

The Effects of Ag Addition on the Microstructure and Mechanical Properties of TiAlSiN Films

Chang Jie Feng, Yuan Fei Jiang, Shui Lian Hu, Ya Zhou

Applied Mechanics and Materials, 421, 304–307 · Published 11 September 2013 · DOI 10.4028/www.scientific.net/amm.421.304

Open full textCite this paper

In brief

“The Effects of Ag Addition on the Microstructure and Mechanical Properties of TiAlSiN Films” is a 2013 journal article by Chang Jie Feng and 3 co-authors, published in Applied Mechanics and Materials. OpenAlex counts 2 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Applied Mechanics and Materials.

Citations
2
Most cited in
2023 (1)
References
17
Authors
4

Abstract

Adding a low content of soft metals (such as Ag, Au, Cu, etc) in TiN-based films can decrease the friction coefficient of the nitride films. To improve the mechanical properties of the TiAlSiN film, 4.5 at.% Ag was added in the TiAlSiN film. TiAlSiN and TiAlSiN/Ag films were deposited on AISI304 steel by magnetron sputtering using a Ti50Al40Si10 target and a Ti50Al40Si10 plus an Ag strip, respectively. The microstructure and mechanical properties of the films were investigated by SEM/EDS, XRD, a tribological machine and a microhardness tester. The results show that, with 4.5 at.% Ag addition, the surface morphology of the TiAlSiN film became rougher and its microhardness decreased from 1520±35 HV0.01 to 1307±42 HV0.01. The preferred orientation of (111) of the TiAlSiN film changed to randomly and the diffraction peaks became broader due to the Ag addition. The friction coefficient of the TiAlSiN-Ag film decreased compared with the TiAlSiN film, but it showed inferior wear resistance due to its lower microhardness. The effects of Ag addition on the microstructure and mechanical properties of TiAlSiN films were discussed.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Feng, C. J., Jiang, Y. F., Hu, S. L., & Zhou, Y. (2013). The Effects of Ag Addition on the Microstructure and Mechanical Properties of TiAlSiN Films. Applied Mechanics and Materials, 421, 304–307. https://doi.org/10.4028/www.scientific.net/amm.421.304

MLA 9

Feng, Chang Jie, et al. “The Effects of Ag Addition on the Microstructure and Mechanical Properties of TiAlSiN Films.” Applied Mechanics and Materials, vol. 421, 2013, pp. 304–307. https://doi.org/10.4028/www.scientific.net/amm.421.304.

Chicago

Feng, Chang Jie, Yuan Fei Jiang, Shui Lian Hu, and Ya Zhou. 2013. “The Effects of Ag Addition on the Microstructure and Mechanical Properties of TiAlSiN Films.” Applied Mechanics and Materials 421: 304–307. https://doi.org/10.4028/www.scientific.net/amm.421.304.

Harvard

Feng, C. J. et al. (2013) ‘The Effects of Ag Addition on the Microstructure and Mechanical Properties of TiAlSiN Films’, Applied Mechanics and Materials, 421, pp. 304–307. doi:10.4028/www.scientific.net/amm.421.304.

IEEE

C. J. Feng, Y. F. Jiang, S. L. Hu, and Y. Zhou, “The Effects of Ag Addition on the Microstructure and Mechanical Properties of TiAlSiN Films,” Applied Mechanics and Materials, vol. 421, pp. 304–307, 2013, doi: 10.4028/www.scientific.net/amm.421.304.

BibTeX

@article{feng2013effects,
  title     = {{The Effects of Ag Addition on the Microstructure and Mechanical Properties of TiAlSiN Films}},
  author    = {Feng, Chang Jie and Jiang, Yuan Fei and Hu, Shui Lian and Zhou, Ya},
  journal   = {Applied Mechanics and Materials},
  year      = {2013},
  volume    = {421},
  pages     = {304--307},
  doi       = {10.4028/www.scientific.net/amm.421.304},
  url       = {https://doi.org/10.4028/www.scientific.net/amm.421.304}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • silver addition
  • friction coefficient
  • microhardness
  • wear resistance
  • microstructure
  • crystallographic texture
  • surface morphology
  • magnetron sputtering

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Feng, C. J., Jiang, Y. F., Hu, S. L., & Zhou, Y. (2013). The Effects of Ag Addition on the Microstructure and Mechanical Properties of TiAlSiN Films. Applied Mechanics and Materials, 421, 304–307. https://doi.org/10.4028/www.scientific.net/amm.421.304

How many times has this paper been cited?

2 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Applied Mechanics and Materials: sign in and open the full text from this page.

Who wrote this paper?

Chang Jie Feng, Yuan Fei Jiang, Shui Lian Hu, Ya Zhou.

What is the DOI of this paper?

10.4028/www.scientific.net/amm.421.304, permanently at https://doi.org/10.4028/www.scientific.net/amm.421.304. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.