Journal article · 1992 · Open access

The effect of substrate surface roughness on the friction and wear of sputtered MoS2films

E. W. Roberts, B J Williams, J.A. Ogilvy

Journal of Physics D Applied Physics, 25(1A), A65–A70 · Published 14 January 1992 · DOI 10.1088/0022-3727/25/1a/012

Open PDFView at the publisherCite this paper

In brief

“The effect of substrate surface roughness on the friction and wear of sputtered MoS2films” is a 1992 journal article by E. W. Roberts and 2 co-authors, published in Journal of Physics D Applied Physics. OpenAlex counts 40 citations as of 17 November 2026. It is open access: the full text is free to read at Journal of Physics D Applied Physics.

Citations
40
Most cited in
2020 (4)
Field-weighted impact
2.64
References
6
Authors
3

Abstract

This paper examines how the durability and friction of thin films of molybdenum disulphide are affected by the surface roughness of the substrate to which they are applied. Three types of substrate, representing a variety of bearing materials (bearing steel, titanium alloy and hot-pressed silicon nitride), were prepared with surface roughnesses of nominally 0.04, 0.1, 0.2 and 0.4 µm (centre line average values). Onto these substrates were deposited 1 µm thick films of sputtered MoS 2 . Pin-on-disc tests undertaken in high vacuum indicated that both film friction and film durability varied appreciably with substrate surface roughness. The most durable films were those applied to silicon nitride substrates. With this film/substrate combination, the onset of film failure was more gradual than that seen with the films applied to metal substrates, and the MoS 2 film was observed to recover its low friction properties several times before complete failure. Results from these experiments are presented and a theoretical model, based on the numerical simulation of friction between contacting rough surfaces, is introduced and is used to explain qualitatively the variation in MoS 2 film friction with the surface roughness of metallic substrates. Possible reasons for the poor agreement between the model and those results obtained with silicon nitride substrates are discussed.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Roberts, E. W., Williams, B. J., & Ogilvy, J. (1992). The effect of substrate surface roughness on the friction and wear of sputtered MoS2films. Journal of Physics D Applied Physics, 25(1A), A65–A70. https://doi.org/10.1088/0022-3727/25/1a/012

MLA 9

Roberts, E. W., et al. “The effect of substrate surface roughness on the friction and wear of sputtered MoS2films.” Journal of Physics D Applied Physics, vol. 25, no. 1A, 1992, pp. A65–A70. https://doi.org/10.1088/0022-3727/25/1a/012.

Chicago

Roberts, E. W., B J Williams, and J.A. Ogilvy. 1992. “The effect of substrate surface roughness on the friction and wear of sputtered MoS2films.” Journal of Physics D Applied Physics 25 (1A): A65–A70. https://doi.org/10.1088/0022-3727/25/1a/012.

Harvard

Roberts, E. W., Williams, B. J. and Ogilvy, J. (1992) ‘The effect of substrate surface roughness on the friction and wear of sputtered MoS2films’, Journal of Physics D Applied Physics, 25(1A), pp. A65–A70. doi:10.1088/0022-3727/25/1a/012.

IEEE

E. W. Roberts, B. J. Williams, and J. Ogilvy, “The effect of substrate surface roughness on the friction and wear of sputtered MoS2films,” Journal of Physics D Applied Physics, vol. 25, no. 1A, pp. A65–A70, 1992, doi: 10.1088/0022-3727/25/1a/012.

BibTeX

@article{roberts1992effect,
  title     = {{The effect of substrate surface roughness on the friction and wear of sputtered MoS2films}},
  author    = {Roberts, E. W. and Williams, B J and Ogilvy, J.A.},
  journal   = {Journal of Physics D Applied Physics},
  year      = {1992},
  volume    = {25},
  number    = {1A},
  pages     = {A65--A70},
  doi       = {10.1088/0022-3727/25/1a/012},
  url       = {https://doi.org/10.1088/0022-3727/25/1a/012}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201211
201311
201722
201811
201922
202044
202133
202211
202333
202611

Its field-weighted citation impact is 2.64: it has been cited 2.64 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • MoS2
  • MoS2 thin films
  • sputtered thin films
  • substrate roughness
  • friction
  • wear
  • film durability
  • pin-on-disc test

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Roberts, E. W., Williams, B. J., & Ogilvy, J. (1992). The effect of substrate surface roughness on the friction and wear of sputtered MoS2films. Journal of Physics D Applied Physics, 25(1A), A65–A70. https://doi.org/10.1088/0022-3727/25/1a/012

How many times has this paper been cited?

40 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Physics D Applied Physics: sign in and open the PDF from this page.

Who wrote this paper?

E. W. Roberts, B J Williams, J.A. Ogilvy.

What is the DOI of this paper?

10.1088/0022-3727/25/1a/012, permanently at https://doi.org/10.1088/0022-3727/25/1a/012. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.